What is additive manufacturing?
📍 Where we are: Foundations — Chapter 1 of 11. This is the very first page of the series. We start with the big question, "what is this technology, actually?", before looking at its history, how it works, and when to use it.
Imagine you want a small statue. You could carve it out of a block of soap, taking away everything that is not statue. You could press clay into a mold and let it set into the shape of the mold. Or you could build it up from nothing, squeezing out a thin ribbon of icing and stacking it, layer on layer, the way a baker decorates a cake. The first way is subtractive, the second is formative, and the third is additive. Additive manufacturing is the icing way: the object is built by adding material, a thin layer at a time, following a digital recipe.
What this chapter covers
This chapter gives you the one definition and the one mental picture that the rest of the series builds on. We define additive manufacturing using the international standard that fixes the vocabulary, compare it with the two older families of making things (cutting away and molding), explain why people say both "additive manufacturing" and "3D printing", and finish with a map of the four books in this series.
The definition, in plain words
Manufacturing simply means making things, usually many of them, in a planned and repeatable way. A part is one manufactured object, such as a bracket, a tooth crown, or a gear.
The international standard ISO/ASTM 52900, which exists so that everyone uses the same words, defines additive manufacturing (AM) as the "process of joining materials to make parts from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing and formative manufacturing methodologies" [1]. Three ideas are packed into that sentence:
- From 3D model data. A 3D model is a digital description of a shape that lives in a computer file. No physical template is needed, only the file.
- Joining materials. The machine adds material where the object should be and, in most processes, adds nothing where it should not.
- Usually layer upon layer. A layer is a thin slice of the object, often a fraction of a millimeter thick. Stack enough slices and you have a solid shape. The word "usually" is in the standard on purpose, because some processes add material along a path rather than in flat layers.
The standard's scope statement says the same thing slightly differently: AM "builds physical three-dimensional (3D) geometries by successive addition of material" [1].
Three ways of making a shape
Almost every manufactured object was shaped by one of three families of methods. The labels below are our plain-language summary of the contrast the standard draws.
| Family | Idea | Everyday picture | Typical examples |
|---|---|---|---|
| Subtractive | Start with more material than you need and remove the excess. | Carving a statue from a block of soap | Milling, turning on a lathe, drilling |
| Formative | Force material into a shape using a tool or mold. | Pressing clay into a cookie mold | Casting, forging, injection molding |
| Additive | Build the shape by adding material where it is wanted. | Stacking ribbons of icing into a cake decoration | 3D printing and the processes in this series |
Each family has strengths. Subtractive machining (cutting with a computer-controlled tool) is very accurate and works on strong metals. Formative methods are extremely fast and cheap per part once the mold exists, which is why a plastic bottle costs almost nothing. Additive methods need no mold and no special cutting tool for each new shape, so changing the design is as easy as changing a file. The price you pay is usually speed and, often, surface finish. Later chapters, especially Chapter 6 and Chapter 8, explore this trade-off honestly.
The same shape made three ways: cut out of a block (subtractive), pressed into a mold (formative), or stacked up layer by layer (additive).
Original diagram by the authors, created with AI assistance.
"Additive manufacturing" or "3D printing"?
You will hear both terms, and they overlap. The standard defines 3D printing as "fabrication of objects through the deposition of a material using a print head, nozzle or another printer technology", and adds that the term is "often used in a non-technical context synonymously with additive manufacturing" and typically associated with machines "used for non-industrial purposes including personal use" [1]. In other words:
- 3D printing is the popular, everyday name, and the standard also uses it for the narrower idea of depositing material with a print head or nozzle.
- Additive manufacturing is the formal, broader term used in industry, engineering and standards. It also covers processes that do not look like printing at all, such as a laser melting a bed of metal powder.
This series uses "additive manufacturing" (AM) as the main term and "3D printing" when talking about the everyday or desktop version. Older names you may meet in books, which the standard lists as historical terms, include "rapid prototyping", "layer manufacturing" and "solid freeform fabrication" [1]. The word "prototyping" is a clue to where the field began: making quick models, not final products. Chapter 2 tells that story.
A first mental model of the whole process
Whatever the machine, nearly every AM job follows the same pattern, which Chapter 3 covers in detail:
- Create or download a 3D model of the object.
- Software cuts the model into thin layers and works out the machine's instructions.
- The machine builds the object, layer by layer, on a flat base called the build platform (the surface on which building starts [1]).
- A person removes the part and finishes it (cleaning, removing temporary supports, and so on).
A support is a temporary structure that holds up an overhanging part while it is being built and is normally removed afterwards [1]. Think of the scaffolding around a building under construction.
There are many machines that do step 3, and they work in very different ways. The standard sorts them into seven process categories, which Chapter 4 introduces: material extrusion, vat photopolymerization, powder bed fusion, material jetting, binder jetting, directed energy deposition and sheet lamination [1].
Why it matters
AM matters because it changes what is practical to make. Because no mold or special tool is needed, a design can be revised and re-made quickly. A shape that would be very hard to cut or mold, such as a part with internal channels, can sometimes be built directly. It is widely used for models and tooling and increasingly for end-use parts; one industry survey, the Wohlers Report 2024, estimated the worldwide AM industry at about 20 billion US dollars in 2023, after growth of about 11 percent over the previous year [2]. Figures from such reports are estimates, and it helps to see them as a rough size of the field rather than an exact count. Reviews of the field also stress that AM has real challenges, including process-related voids and anisotropy (properties that depend on direction) [3]. Being realistic about both sides is a goal of this series.
In the real world
If you have seen a plastic desktop printer extruding a thin string of melted plastic, you have seen one kind of AM. Industry uses much larger and more varied machines, from systems that fuse metal powder with lasers to printers that build with liquid resin cured by light. The review literature lists biomedical, aerospace and building applications among the major areas [3], [4]. Chapter 7 takes a careful, example-by-example look at these.
The four-book series map
This guide is organized by difficulty:
- Book 1, Additive Manufacturing Fundamentals (this book, beginner): what AM is, how a part goes from file to object, and when it is worth using.
- Book 2, AM Processes, Materials & Design (intermediate): the physics of each process, materials, design rules, post-processing and qualification.
- Book 3, Open-Source Additive Manufacturing (intermediate to advanced): open hardware, firmware, slicers and the community tools behind the field.
- Book 4, Research Frontiers & Industrial Challenges (advanced): open research problems that industry still struggles with.
Key terms
- Additive manufacturing (AM) — making parts from 3D model data by joining material, usually layer upon layer.
- Subtractive manufacturing — making a shape by removing material from a larger piece, as in milling or drilling.
- Formative manufacturing — making a shape by forcing material into a mold or using a tool to reshape it, as in casting or forging.
- 3D printing — the everyday name for AM; in the standard, depositing material with a print head, nozzle or similar technology.
- 3D model — a digital description of an object's shape stored in a computer file.
- Layer — a thin slice of material laid out to build up the object.
- Part — one manufactured object.
- Build platform — the base surface on which building of the part starts.
- Support — a temporary structure that anchors or props up the part during building and is usually removed later.
- Process category — one of the seven families into which the standard sorts AM methods.
Where this leads
Next we look back at where all this came from: From stereolithography to today: a short history.