Skip to main content

Applications by industry

📍 Where we are: Part 2 · Why and When — Chapter 7 of 11. The last chapter listed what AM is good at. Here we see those strengths in real products, and we are careful about which uses are everyday and which are still experiments.

The simple version

Imagine walking through a hardware store and asking each aisle, "Do you use 3D printing?" The honest answers would range from "all day, every day, we couldn't make this without it" to "we tried it once and it was interesting." This chapter walks the aisles and tells you which answer you would hear in each one, using only examples that have a public source behind them.

What this chapter covers​

We visit eight areas: aerospace, medical implants, dentistry, automotive, tooling (the molds and fixtures that make other products), construction, energy and consumer products. For each we give a well-documented example, say what AM contributed, and label how mature the use is. We use three simple labels, which are our own shorthand and not an official scale:

  • Established — made in large numbers, as routine production, for years.
  • Growing — used in real production, but for a limited range of parts or with open problems.
  • Early — mostly research, demonstrations and small pilot projects.

Company facts come from the company's own statements and are labelled as such; where we could not confirm a number, we say so.

Aerospace: the fuel nozzle that made the case​

A jet engine's fuel nozzle sprays fuel into the combustion chamber. For its LEAP engine, GE redesigned the nozzle tip so it could be printed in metal: about 20 pieces that were once welded and brazed (joined with molten filler metal) together became one piece, and its weight was cut by about a quarter. GE reported making its 30,000th tip at its Auburn, Alabama plant in October 2018, with production there having started in 2015 [1]. Tens of thousands of copies in a safety-critical product is strong proof of maturity. Maturity: established, for this and a limited set of similar parts. Aerospace as a whole still prints a small share of its parts, because each must be qualified (proven suitable) first.

Medical implants: hip sockets with a built-in texture​

An acetabular cup is the socket-shaped part of an artificial hip joint that is fixed into the pelvis. Bone grows best into a porous surface, and AM can build that texture directly into the metal. LimaCorporate's Delta TT cup, made from titanium by electron beam melting (a process where an electron beam melts metal powder, covered in Book 2) with equipment maker Arcam, was created in 2007, received a CE mark (the European regulatory approval mark) and was first implanted in Italy that year; the company marked ten years of the technology in 2017 [2]. This source supports the 2007 CE mark, not a US FDA date. Maturity: established for porous orthopedic implants; patient-specific implants are a growing area.

Dentistry: the largest customization story​

Clear dental aligners are plastic trays that gradually move teeth. Each patient needs a different series of trays, so each is shaped on its own mold, and Align Technology (maker of Invisalign) has built its aligners on 3D-printed molds, made with stereolithography machines [3]. In January 2024 the company completed its acquisition of Cubicure, a firm that makes direct-printing technology; Align's first directly printed device is a palatal expander (a device that widens the upper jaw), and it says its goal is to eventually print aligners directly, without a mold [3]. These are statements by the company; we did not verify a production volume. Maturity: established for printed molds; direct printing of devices is growing.

Automotive: many small helpers, fewer car parts​

Cars are made in huge volumes, which favours conventional processes; AM fits at the edges (prototypes, factory tools, special parts). BMW Group reports that it makes more than 400,000 3D-printed parts a year worldwide: over 300,000 of them in 2023 at its Additive Manufacturing Campus near Munich, plus parts from plants elsewhere. It highlights customised robot grippers (the "hands" that pick up parts on the assembly line) as one use [4]. These are company-reported figures without a breakdown by use. Maturity: growing, strongest for tools and small series rather than for mass-produced car parts.

Tooling: printing the molds that make other things​

As the previous chapter explained, an injection mold can have cooling channels that follow the part's shape when the tool is printed in metal. An early academic demonstration printed a mold with conformal channels and found it reached a steady temperature at once and stayed more uniform, whereas a mold with straight channels took 10 to 15 cycles to settle [5]. General AM reviews list layer-by-layer surface texture, anisotropic behaviour and void formation among the processing challenges [6]. Maturity: growing. It is well documented and used commercially, but open problems remain.

Construction: printing buildings​

In 3D concrete printing, a robot arm or gantry (a frame that carries the nozzle over the work area) extrudes a stiff, cement-based mix layer by layer to build walls. A 2016 review from Eindhoven University of Technology said additive manufacturing of concrete was "still in its infancy", while noting a rapid increase in researchers and companies since about 2012; it listed examples such as a two-storey house in China and an office building in Dubai [7]. That review is from 2016; the field has moved since, but we did not verify a current statistic, so we describe the maturity conservatively. Maturity: early.

Energy: turbine burners and nuclear brackets​

Two documented cases sit at different maturity levels. First, industrial gas turbines: Siemens engineers published (a single industrial case study) how they developed and qualified an AM repair for the burner tips of their SGT-700 and SGT-800 turbines, where the damaged tip is machined off and a new one is built in metal powder directly on the old burner [8]. A follow-up life-cycle study of the same repair (again a single case, not a general result) reported a smaller material, energy and carbon footprint than the conventional machining-and-welding route [9]. AM-based repair is broader than this one case; a 2023 systematic review surveys the techniques [10]. Second, nuclear power: in 2021 four 3D-printed fuel assembly brackets, made at Oak Ridge National Laboratory, were installed in a Tennessee Valley Authority reactor at Browns Ferry. The US Department of Energy calls them the first safety-related 3D-printed components in a commercial reactor, to stay in service six years with regular inspection [11]. That is a pilot of four parts; wider nuclear use is still research, for example 316L stainless steel made by electron beam melting for fusion applications [12]. Maturity: growing for turbine repair (a published, qualified process; repair volume not verified); early for nuclear.

Consumer products: lattice running-shoe midsoles​

A lattice is a repeating open framework of small struts, here used as cushioning. In April 2017 adidas introduced Futurecraft 4D, describing midsoles "crafted with light and oxygen" using Carbon's Digital Light Synthesis (a resin-printing process, see Book 2); it planned 300 pairs for friends and family, over 5,000 for retail in autumn 2017 and a target of over 100,000 pairs by the end of 2018 [13]. Carbon says adidas iterated over 50 lattice designs in a stiff but resilient elastomer, a one-piece midsole whose properties vary across the part, which standard molding cannot make [14]. Those pair numbers were plans, and we found no verified count of pairs actually made. Maturity: growing, but limited to a few product lines. We found no well-sourced eyewear example, so we make no eyewear claim.

A map of eight industries (aerospace, medical implants, dentistry, automotive, tooling, construction, energy, consumer), each with an example application and a maturity label of established, growing or early. Eight industries, one documented example each, and a rough maturity label: established, growing or early. Original diagram by the authors, created with AI assistance.

Patterns across the industries​

The successful uses share three features. They exploit a real strength from the previous chapter: consolidation (fuel nozzle), customization (aligners, implants), complex internal channels (molds) or lattices (midsoles). They usually involve relatively small, high-value parts. And they came with a lot of engineering and testing: none is simply "printing the old part".

Why it matters​

When someone says "3D printing is taking over manufacturing," these examples show a more accurate picture: AM is established in some narrow niches, growing in several, early in others. Judge a claim by asking which category it falls into, and ask for the specific part and the number made. A vague claim without either is marketing, not evidence of maturity.

Key terms​

  • Fuel nozzle — the part of a jet engine that sprays fuel into the combustion chamber.
  • Acetabular cup — the socket-shaped component of an artificial hip joint.
  • Electron beam melting — a metal printing process in which an electron beam melts metal powder layer by layer.
  • CE mark — the European mark showing that a product meets the regulatory requirements for sale there.
  • Dental aligner — a clear plastic tray that gradually moves teeth, made specifically for each patient.
  • Gripper — a robot's "hand" that picks up and holds parts.
  • 3D concrete printing — building structures by extruding cement-based material layer by layer.
  • Lattice — a repeating open framework of small struts, used for cushioning or light structures.
  • Maturity — in this chapter, how routine and widespread a use is: established, growing or early.

Where this leads​

Whether an application makes sense depends on money as much as on engineering. The next chapter, economics and when to use AM, looks at the costs behind the decision.