From idea to object: the digital workflow
📍 Where we are: Part 1 · How It Works — Chapter 3 of 11. Chapter 2 gave the history. Now we open the hood: every AM job, on every kind of machine, starts as a computer file and passes through a chain of digital and physical steps.
Think of baking from a recipe. First you decide what cake you want (the design). Then you write the recipe down so someone else could follow it (the model file). A pastry chef plans the order of the steps, such as which layer goes first and how thick each should be (preparation and slicing). The oven or the mixer follows the steps exactly (the printer running its instructions). Finally you take the cake out of the tin, trim it, and taste it to check it came out right (removal, finishing and inspection).
What this chapter covers
We follow one object, a small bracket, through the full chain: designing it in software, saving it as a mesh file, deciding how to orient it, slicing it into layers, turning the layers into machine instructions, printing, removing and finishing the part, and checking it. Along the way we define each file format and term you will meet in any AM shop.
Step 1 and 2: from design to a mesh file
CAD, the digital design
CAD stands for computer-aided design: software in which you draw a part with exact dimensions, such as "a plate 40 mm long with a 6 mm hole". The result is a 3D model. A model might also come from a 3D scan (a measurement of a real object with cameras or lasers) or from software that generates shapes automatically.
CAD programs keep a detailed, exact description of the part. The international standard mentions STEP (ISO 10303), a standard way to exchange product data between programs [1]. Many AM machines do not read these exact files directly. They want a simpler one.
The mesh: STL, 3MF and others
A mesh is a surface approximated by many small flat pieces, usually triangles, a bit like a paper-folded model or a low-polygon video-game character. The most common mesh format in AM is STL. The standard defines it as a "file format for model data describing the surface geometry of an object as a tessellation of triangles" and notes it was originally developed for the early stereolithography machines and "has never been recognized as an official standard by any standards developing organization" [1]. The Library of Congress format record adds that STL carries no color or texture, and that its units are not stored, so a file may be read as millimeters by one program and inches by another [2].
A cube needs only 12 triangles (two per face), but a smooth curve needs many more, so a fine STL of a curved part can contain a very large number of them; reviews describe exactly this step of approximating the CAD drawing by triangles and then slicing it into layers [3]. In the binary form of STL, each triangle takes 50 bytes after an 80-byte header and a 4-byte count [4].
Newer formats fix STL's weaknesses:
| Format | Who defines it | What it adds |
|---|---|---|
| STL | Informal, widely adopted since 1987 | Triangles only |
| AMF (Additive Manufacturing File Format) | ISO/ASTM 52915 | Color, materials, lattices, curved triangles, metadata [1] |
| 3MF (3D Manufacturing Format) | 3MF Consortium; the consortium states that it is now recognized as ISO/IEC 25422:2025 | A ZIP package of XML files, with extensions for materials, lattices and more [5] [6] |
In practice many people still use STL because every program can open it, while 3MF is growing because it keeps units and settings inside the file.
A common problem is a non-watertight mesh: one with holes or surfaces that cross themselves, like a balloon with a tear. Software that repairs meshes closes the gaps so the program can tell inside from outside.
Step 3: orientation and supports
The designer or technician decides how to place the part in the machine. Orientation means which way up the part sits on the build platform (the flat base the part is built on [1]). It matters because a part built in layers is not equally strong in every direction (Chapter 6), because overhanging surfaces need support, and because the height of the stack affects how long the print takes.
A support is a separate, temporary structure that props up the part during building and is usually removed afterwards [1]. Think of the wooden scaffolding under an arch while the stones are laid. In some processes, such as metal powder bed fusion, supports also help carry heat away [1]. Many parts are arranged several at a time on the platform, so one build cycle (one run of the machine producing one or more parts [1]) makes a batch.
Step 4 and 5: slicing and machine instructions
Slicing is the step where software cuts the 3D model into thin horizontal layers, like slicing a loaf of bread, and works out the path the machine should follow in each layer. The software is called a slicer. You choose the layer height (the thickness of each slice) and other settings. As an illustrative, not measured example: a part 20 mm tall sliced at 0.2 mm per layer has 100 layers; at 0.1 mm it has 200 and takes roughly twice as many passes.
The slicer's output is a file of machine instructions. Most desktop machines use G-code, a very old numerical-control language. NIST describes it as the RS274 numerical-control language, in use for many years, whose most recent standard version, RS274-D, was completed in 1979 and published by the Electronic Industries Association; implementations differ from machine to machine [7]. G-code is a list of simple commands, one per line:
G28 ; home all axes (go to the machine's reference position)
G1 Z0.2 F1200 ; move up to 0.2 mm above the platform, at speed F
G1 X20 Y20 F3000 ; move to position X=20, Y=20 (millimeters)
G1 X60 Y20 E2.0 F1500 ; move to X=60 while pushing out 2.0 units of filament (E)
This snippet is illustrative and was not run on a machine; command sets differ between machine makers ("dialects"). The letter G means "move", X, Y and Z are positions, E is the amount of material pushed out, and F is the feed rate (speed). Other machines, such as laser powder bed fusion systems, use their own formats for laser paths, and the 3MF consortium has published a machine-independent toolpath extension for them [5].
Step 6 to 9: printing, removal, post-processing, inspection
- Printing. The machine runs its instructions: in the build chamber it deposits or fuses material layer by layer. Because the first layer is the foundation for all others, a poor start tends to ruin the whole job.
- Removal. Once finished, the part is separated from the platform. For powder processes, the part is dug out of loose powder; for resin processes it is lifted out of the vat.
- Post-processing. Almost every part needs extra work: removing supports, cleaning off powder or uncured resin, heat treatment, machining critical surfaces, sanding or painting. Book 2 devotes a chapter to this.
- Inspection. Finally the part is measured and checked against the design, using tools from a simple caliper to scanners and X-ray inspection. Parts for aircraft or the human body need formal proof of quality.
The digital workflow: a design becomes a mesh file, is oriented and sliced, becomes G-code, is printed, and the part is finished and inspected.
Original diagram by the authors, created with AI assistance.
Why it matters
Understanding the chain tells you where problems start. A bad mesh gives holes in the part. A poor orientation gives weak or rough surfaces. A wrong slicer setting gives failed prints. And because all the information is digital, designs can be copied, edited and sent anywhere. That is the root of AM's flexibility, and also of challenges such as protecting intellectual property.
In the real world
At a service bureau (a company that prints parts for customers) the steps are usually split between people: a designer makes the model, a "build preparation" engineer orients and slices, an operator loads and unloads the machine, and a technician handles post-processing and inspection. At a hobbyist's desk, one person does all of it, often with free software. The steps are the same; the care and record-keeping differ.
Key terms
- CAD (computer-aided design) — software for drawing parts with exact dimensions.
- Mesh — a surface approximated by many small flat pieces, usually triangles.
- STL — the oldest and most common mesh file format, describing only a triangulated surface.
- 3MF — a newer, ZIP-based format that stores units, colors, materials and more.
- Orientation — the direction in which a part sits on the build platform.
- Slicing — cutting the 3D model into thin layers and planning the path for each.
- Slicer — the software that slices a model and creates machine instructions.
- Layer height — the thickness of each slice.
- G-code — a text language of simple commands, such as moves and extrusion amounts, that many machines follow.
- Build cycle — one run of the machine producing one or more parts.
- Post-processing — all the finishing steps after the part comes off the machine.
Where this leads
We have followed the digital path; next we meet the machines themselves. The standard sorts them into seven families: The seven process categories.