Skip to main content

Glossary

📍 Quick reference: a plain-language A-to-Z glossary of the terms used in Research Frontiers & Industrial Challenges. Every term appears in the chapter named after it.

3D concrete printing (3DCP) — extruding cementitious mortar in layers to build structures. (See Large-scale AM and construction.)

3MF — an XML-based AM file format, recognised as ISO/IEC 25422:2025, able to carry materials and metadata. (See Digital thread, data and the supply chain.)

4D printing — printing structures designed to change shape or function after printing. (See Multi-material, functionally graded and 4D printing.)

a90/95 — the flaw size detected 90% of the time at a 95% lower confidence bound. (See In-situ monitoring and metrology.)

Absorptivity — fraction of laser power that becomes heat in the metal; a calibration parameter in simulations. (See Lab 4 — Simulate a melt pool with open-source codes.)

Acellular scaffold — a printed structure without living cells. (See Bioprinting and micro/nano-scale AM.)

Acoustic emission — sound produced by the melt pool, used as a signature of keyhole regimes. (See In-situ monitoring and metrology.)

Activity-based costing — a cost method that adds up the cost of each activity (build, depowdering, machining, inspection) instead of using one overhead rate. (See Cost, throughput and scaling to production.)

Actuator — the part of the machine that can be changed on command, such as laser power. (See Closed-loop process control.)

Age bias — the tendency of cumulative citation counts to favour older papers. (See Research starter kit: from reading to first contribution.)

AM Bench — NIST's series of blind benchmark measurements and modelling challenges. (See Simulation and integrated computational materials engineering.)

AM sabotage — deliberate alteration of a design or process so that a printed part fails early. (See Digital thread, data and the supply chain.)

Anisotropy — dependence of a property on direction. (See Microstructure, anisotropy and process–structure–property links.)

Anomaly detection — flagging data that differ from normal builds. (See Machine learning for additive manufacturing.)

Balling — breakup of a melt track into spheres by capillary instability. (See Melt-pool physics: keyholes, balling and spatter.)

Bayesian optimisation — choosing each next experiment using a probabilistic model of what has been learned so far. (See Machine learning for additive manufacturing.)

Benchmark — a shared, held-back test case that allows fair comparison of methods. (See Machine learning for additive manufacturing.)

Big-area additive manufacturing (BAAM) — Oak Ridge National Laboratory's pellet-extrusion large-format system. (See Large-scale AM and construction.)

Bioink — a printable material, usually a hydrogel, that contains living cells. (See Bioprinting and micro/nano-scale AM.)

Blind benchmark — a test in which measurements are held back until predictions are submitted. (See Preface — Research Frontiers & Industrial Challenges.)

Build rate — the volume of material a machine solidifies per hour, usually in cubic centimetres per hour. (See Cost, throughput and scaling to production.)

Building-block approach — a test pyramid progressing from coupons to elements, subcomponents and full components. (See Qualification and certification: the central bottleneck.)

Buy-to-fly ratio — mass of raw material purchased divided by mass of the finished part. (See Sustainability and life-cycle assessment.)

Calibration — tuning uncertain model inputs so that outputs match a measurement. (See Lab 4 — Simulate a melt pool with open-source codes.)

Calibration versus validation — tuning inputs to data, versus checking against data not used for tuning. (See The honest verdict: what industry still cannot do.)

CALPHAD — computational thermodynamics from assessed phase-diagram databases. (See Simulation and integrated computational materials engineering.)

Cellular automaton — a grid-based rule model used to grow grains. (See Simulation and integrated computational materials engineering.)

Cellular automaton (CA) — a model that updates cells by local rules; ExaCA uses it for nucleation and grain growth. (See Lab 4 — Simulate a melt pool with open-source codes.)

Cellular substructure — sub-micrometre cells formed by fast solidification, with dislocation-rich, solute-enriched walls. (See Microstructure, anisotropy and process–structure–property links.)

Certification — formal acceptance of that evidence by a regulator or customer. (See Qualification and certification: the central bottleneck.)

CFD — computational fluid dynamics, solving the flow of the liquid metal. (See Simulation and integrated computational materials engineering.)

Checksum — a short fingerprint of a file (here SHA-256) used to verify that it has not changed. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Closed-loop control — measuring the output and adjusting an input to keep it near a target. (See Closed-loop process control.)

Co-axial monitoring — a sensor that looks along the same optical path as the laser, so it always sees the melt pool. (See In-situ monitoring and metrology.)

Coefficient of thermal expansion (CTE) — how much a material grows per degree of temperature rise. (See Large-scale AM and construction.)

Columnar grain — an elongated grain that grows along the direction of heat flow. (See Microstructure, anisotropy and process–structure–property links.)

Conduction mode — melting in which heat flows inward from the surface and the pool is shallow and stable. (See Melt-pool physics: keyholes, balling and spatter.)

Contested claim — a claim on which credible sources disagree or that has not reproduced. (See Preface — Research Frontiers & Industrial Challenges.)

Cradle-to-gate — an LCA covering raw material extraction up to the factory exit. (See Sustainability and life-cycle assessment.)

Cumulative energy demand (CED) — total primary energy used across the counted life-cycle stages. (See Sustainability and life-cycle assessment.)

D4σ diameter — beam diameter defined from the second moment of the intensity, used to specify laser spot size. (See Lab 4 — Simulate a melt pool with open-source codes.)

Data card — a short document describing a dataset's source, licence, structure and limitations. (See Research starter kit: from reading to first contribution.)

Data leakage — information from test data entering training, which inflates accuracy. (See Machine learning for additive manufacturing.)

Data pedigree — the documented lineage of a dataset: where it came from and how it was processed. (See Digital thread, data and the supply chain.)

Denudation — removal of powder near a scan track by vapour-driven gas flow. (See Melt-pool physics: keyholes, balling and spatter.)

Design allowable — a statistically derived strength value used in design, such as A-basis or B-basis. (See Qualification and certification: the central bottleneck.)

Design consolidation — merging an assembly of many parts into one printed part. (See Cost, throughput and scaling to production.)

Digital spare part — a stored design and process definition from which a replacement part can be printed on demand. (See Digital thread, data and the supply chain.)

Digital thread — the connected, traceable record linking design, material, build, inspection and certification data for a part. (See Digital thread, data and the supply chain.)

Dilution — mixing of the deposited material with the substrate or the previous layer. (See Multi-material, functionally graded and 4D printing.)

Distortion — change of shape when stress is released, for example on cutting from the baseplate. (See Defects, residual stress and distortion.)

Distributed manufacturing — producing parts at several locations close to demand from shared digital definitions. (See Digital thread, data and the supply chain.)

DOI — digital object identifier, a persistent link to a paper or dataset. (See Research starter kit: from reading to first contribution.)

Epitaxial growth — new solid growing on existing crystals so that it continues their orientation. (See Microstructure, anisotropy and process–structure–property links.)

Evidence level — this book's label for how strongly a claim is established: lab scale, production or contested. (See Research starter kit: from reading to first contribution.)

Extrapolation — predicting outside the range of conditions seen in training. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Extrusion bioprinting — pushing bioink through a nozzle. (See Bioprinting and micro/nano-scale AM.)

FAIR — findable, accessible, interoperable, reusable: a set of principles for data. (See Research starter kit: from reading to first contribution.)

FAIR data — data that is findable, accessible, interoperable and reusable. (See Digital thread, data and the supply chain.)

False indication — a flagged location with no real defect, for example one erased by remelting. (See In-situ monitoring and metrology.)

Fatigue life — number of load cycles before failure. (See Microstructure, anisotropy and process–structure–property links.)

Feed-forward control — adjusting inputs using a model of the process, without measuring the result. (See Closed-loop process control.)

First-in-human trial — the first clinical test of a product in people. (See Bioprinting and micro/nano-scale AM.)

Forward and backward snowballing — following a paper's references (backward) or the works that cite it (forward) to find related literature. (See Research starter kit: from reading to first contribution.)

Foundational paper — a widely cited, usually older paper that defines or reviews a topic. (See Research starter kit: from reading to first contribution.)

Functionally graded material (FGM) — a material whose composition changes gradually through the part. (See Multi-material, functionally graded and 4D printing.)

Gas atomization — producing metal powder by breaking a molten stream with a jet of inert gas. (See Sustainability and life-cycle assessment.)

Gaussian process — a probabilistic regression model that gives a prediction with an uncertainty. (See Machine learning for additive manufacturing.)

Global-warming potential (GWP100) — greenhouse-gas impact expressed as CO2-equivalent over 100 years. (See Sustainability and life-cycle assessment.)

Ground truth — the trusted measurement (for example X-ray imaging or CT) against which a model is judged. (See Machine learning for additive manufacturing.)

Grouped cross-validation — splitting so that all rows of a group (build, part, track, setting) are entirely in training or entirely in testing. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

High-entropy alloy (HEA) — an alloy made of several principal elements in similar proportions. (See Alloys for AM and the powder problem.)

HIP — hot isostatic pressing, a heat-and-pressure treatment that closes internal pores. (See Microstructure, anisotropy and process–structure–property links.)

Hot cracking — cracks that open while the last liquid between grains is still present, driven by shrinkage. (See Alloys for AM and the powder problem.)

Hot isostatic pressing (HIP) — high-temperature, high-pressure gas treatment that closes internal pores. (See Defects, residual stress and distortion.)

Humping — periodic bead irregularity in arc deposition. (See Large-scale AM and construction.)

ICME — integrated computational materials engineering: chaining models across scales to link processing to properties. (See Simulation and integrated computational materials engineering.)

Inherent strain method — applying a calibrated plastic-type strain per layer in an elastic model to predict distortion. (See Simulation and integrated computational materials engineering.)

Interface — the boundary region where two materials meet and whose properties govern the joint. (See Multi-material, functionally graded and 4D printing.)

Interlayer — a third material placed between two incompatible ones to avoid brittle phases. (See Multi-material, functionally graded and 4D printing.)

Interlayer bond — the adhesion between successive deposited layers. (See Large-scale AM and construction.)

Intermetallic — an ordered compound of two metals, often hard and brittle, such as FeTi or Al3Ti. (See Multi-material, functionally graded and 4D printing.)

Interoperability — the ability of different vendors' software and machines to exchange data without losing meaning. (See Digital thread, data and the supply chain.)

Intrinsic heat treatment — heat treatment of earlier layers caused by the heat of later layers. (See Microstructure, anisotropy and process–structure–property links.)

IQ/OQ/PQ — installation, operational and performance qualification of a machine. (See Qualification and certification: the central bottleneck.)

ISO/ASTM 52939 — the 2023 qualification-principles standard for additive manufacturing in construction. (See Large-scale AM and construction.)

Isotherm — surface of constant temperature; the melt-pool boundary in a model is one of these. (See Lab 4 — Simulate a melt pool with open-source codes.)

Keyhole mode — melting in which a deep vapour cavity forms and traps the laser, giving deep, narrow pools. (See Melt-pool physics: keyholes, balling and spatter.)

Keyhole pore — a round pore from collapse of a deep vapour cavity. (See Defects, residual stress and distortion.)

Keyhole porosity — pores formed when the vapour cavity collapses or becomes unstable. (See Melt-pool physics: keyholes, balling and spatter.)

Kinetic Monte Carlo — a stochastic method for simulating microstructure evolution. (See Simulation and integrated computational materials engineering.)

Lab-scale demonstration — a result shown in a research setting, typically limited in scale and repetition. (See Preface — Research Frontiers & Industrial Challenges.)

Lack of fusion — voids caused by insufficient melting so that adjacent tracks or layers do not bond. (See Defects, residual stress and distortion.)

Large-format additive manufacturing (LFAM) — printing parts at metre scale, typically with pellet-fed extruders. (See Large-scale AM and construction.)

Latency — the delay between measuring and acting. (See Closed-loop process control.)

Layer-to-layer control — adjusting parameters between layers rather than inside one track. (See Closed-loop process control.)

Leave-one-case-out (LOCO) — grouped cross-validation where each process setting is held out in turn. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Ledger — a table sorting claims by evidence level. (See The honest verdict: what industry still cannot do.)

Leverage — how many other problems depend on solving one. (See The honest verdict: what industry still cannot do.)

Life-cycle assessment (LCA) — a standardized accounting of environmental impacts across a product's life, from raw materials to disposal. (See Sustainability and life-cycle assessment.)

Liquation cracking — cracking where grain boundaries are re-melted in the heat-affected region. (See Defects, residual stress and distortion.)

Marangoni flow — fluid motion driven by surface-tension differences caused by temperature differences. (See Melt-pool physics: keyholes, balling and spatter.)

Melt pool — the small volume of liquid metal under and behind the heat source. (See Melt-pool physics: keyholes, balling and spatter.)

Melt-pool temperature proxy — a surface emission signal standing in for the true temperature field. (See Closed-loop process control.)

Mesh convergence — checking that results stop changing as cells are made smaller. (See Lab 4 — Simulate a melt pool with open-source codes.)

MRL — manufacturing readiness level, a scale of how ready a technology is for repeatable production. (See Preface — Research Frontiers & Industrial Challenges.)

Multi-laser system — a powder bed machine in which several lasers melt different regions of the same layer simultaneously. (See Cost, throughput and scaling to production.)

Noise floor — the scatter between repeat measurements of the same setting; model errors near it cannot be improved by modelling. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Nucleant — a particle that gives growing crystals a place to start, producing small equiaxed grains. (See Alloys for AM and the powder problem.)

Observability — whether the quantity you care about can be inferred from what you can measure. (See Closed-loop process control.)

One-factor-at-a-time design — an experiment that varies one input per case; it cannot reveal interactions between inputs. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Operando X-ray imaging — filming the melt pool inside the metal with a high-speed synchrotron X-ray beam while the process runs. (See In-situ monitoring and metrology.)

Optical tomography (OT) — a camera that integrates the light of each layer to form a layer-by-layer map of anomalies. (See In-situ monitoring and metrology.)

Overfitting — fitting noise in a small training set so that the model fails on new data. (See Machine learning for additive manufacturing.)

Oxide-dispersion-strengthened (ODS) alloy — an alloy strengthened by a fine dispersion of oxide particles such as Y2O3. (See Alloys for AM and the powder problem.)

Oxygen pickup — the rise in oxygen content of powder or parts through oxidation. (See Alloys for AM and the powder problem.)

Part criticality class — a classification by consequence of failure that sets the rigor required. (See Qualification and certification: the central bottleneck.)

Patient-matched device — a medical device designed to fit an individual patient's anatomy. (See Qualification and certification: the central bottleneck.)

Phase-field model — a method that evolves a smooth order-parameter field to simulate solidification microstructure. (See Simulation and integrated computational materials engineering.)

Physics-informed neural network (PINN) — a network trained to satisfy governing equations as well as data. (See Machine learning for additive manufacturing.)

PID controller — a standard feedback rule combining the present error, its accumulated sum and its rate of change. (See Closed-loop process control.)

Pinned environment — software versions recorded exactly, so a run can be repeated. (See Research starter kit: from reading to first contribution.)

Post-processing — all steps after the build: depowdering, support removal, heat treatment, machining, finishing and inspection. (See Cost, throughput and scaling to production.)

Powder reuse — returning unmelted powder, after sieving, to a later build. (See Alloys for AM and the powder problem.)

Power law — a model in which the output is a product of inputs raised to fixed exponents, linear after taking logarithms. (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Primary literature — original research papers, as opposed to summaries. (See Preface — Research Frontiers & Industrial Challenges.)

Printability — how reliably an alloy can be built without cracking or other defects. (See Alloys for AM and the powder problem.)

Probability of detection (POD) — the chance a flaw of a given size is detected; the standard way NDE methods are qualified. (See In-situ monitoring and metrology.)

Process map — a diagram of defect regimes against laser power and scan speed. (See Defects, residual stress and distortion.)

Process–structure–property (PSP) chain — the causal link from process parameters to microstructure to properties. (See Microstructure, anisotropy and process–structure–property links.)

Production demonstration — a result shown in routine commercial use. (See Preface — Research Frontiers & Industrial Challenges.)

Qualification — the process of showing that a process and part meet requirements. (See Preface — Research Frontiers & Industrial Challenges.)

Re-qualification — repeating some or all qualification after a process change. (See Qualification and certification: the central bottleneck.)

Rebar — steel reinforcing bar placed in concrete to carry tension. (See Large-scale AM and construction.)

Rebound effect — extra consumption triggered by an efficiency gain that offsets part of the saving. (See Sustainability and life-cycle assessment.)

Recoating time — the non-melting time spent spreading a fresh powder layer, which caps gains from faster lasers. (See Cost, throughput and scaling to production.)

Recoil pressure — the pressure exerted on the liquid by evaporating metal leaving its surface. (See Melt-pool physics: keyholes, balling and spatter.)

Refractory metal — a metal with a very high melting point, such as tungsten, molybdenum, niobium or tantalum. (See Alloys for AM and the powder problem.)

Registration — aligning in-situ data with CT or part coordinates in space and in time. (See In-situ monitoring and metrology.)

Residual stress — stress locked in the part without any external load. (See Defects, residual stress and distortion.)

RMSE — root mean squared error, the typical size of the prediction error in the units of the target (here µm). (See Lab 5 — Open datasets and a leakage-safe ML baseline.)

Rosenthal solution — closed-form temperature field of a point heat source moving over a thick solid with constant properties. (See Lab 4 — Simulate a melt pool with open-source codes.)

Self-citation — a citation where the citing and cited works share an author. (See Research starter kit: from reading to first contribution.)

Series production — manufacture of many identical parts on a repeating schedule, as opposed to prototypes or one-offs. (See Cost, throughput and scaling to production.)

Shape-memory polymer — a polymer that recovers a programmed shape when triggered, for example by heat. (See Multi-material, functionally graded and 4D printing.)

Shear-thinning — becoming less viscous under flow, so the ink flows when pushed and holds shape when still. (See Bioprinting and micro/nano-scale AM.)

Solidification cracking — tearing of the partly liquid mushy zone as it shrinks during freezing. (See Defects, residual stress and distortion.)

Solidus and liquidus — temperatures at which melting begins and ends; here 1410 K and 1620 K in the model's IN625 file. (See Lab 4 — Simulate a melt pool with open-source codes.)

Spatter — droplets and particles ejected from or near the pool. (See Melt-pool physics: keyholes, balling and spatter.)

Specific energy — energy used per kilogram of product, often in kWh/kg. (See Sustainability and life-cycle assessment.)

Statistical process control (SPC) — ongoing statistical monitoring used to show a process stays within its qualified distribution. (See Qualification and certification: the central bottleneck.)

STEP-NC — an ISO standard family for describing manufacturing operations and product data in one model. (See Digital thread, data and the supply chain.)

Stitching — joining the regions scanned by different lasers so the seam has no defect. (See Cost, throughput and scaling to production.)

STL — a legacy mesh-only file format that carries geometry but not materials or process settings. (See Digital thread, data and the supply chain.)

Stress relief — a heat treatment that lowers residual stress without a full change of microstructure. (See Defects, residual stress and distortion.)

Structural electronics — electronics embedded in or printed on the load-bearing structure. (See Multi-material, functionally graded and 4D printing.)

Support bath — a gel in which soft structures are printed and held until set. (See Bioprinting and micro/nano-scale AM.)

Surrogate model — a fast approximate model standing in for an expensive simulation. (See Simulation and integrated computational materials engineering.)

SWIFT — sacrificial writing into functional tissue, a method to print channels into dense cell matrices. (See Bioprinting and micro/nano-scale AM.)

Synchrotron X-ray imaging — high-speed radiography using a synchrotron beam to see inside the melt pool. (See Melt-pool physics: keyholes, balling and spatter.)

System boundary — the line that decides which stages are counted in an LCA. (See Sustainability and life-cycle assessment.)

Technology readiness level (TRL) — a nine-step scale of maturity from idea to proven system. (See In-situ monitoring and metrology.)

Temperature gradient mechanism — the yielding of a heated top layer against cooler material below, which leaves tension after cooling. (See Defects, residual stress and distortion.)

Texture — a non-random distribution of crystal orientations. (See Microstructure, anisotropy and process–structure–property links.)

Transfer learning — reusing a model trained on one task or machine for another. (See Machine learning for additive manufacturing.)

TRL — technology readiness level, a 1-9 scale of how mature a technology is. (See Preface — Research Frontiers & Industrial Challenges.)

Two-photon polymerization (2PP) — nanoscale printing by two-photon absorption at a laser focus. (See Bioprinting and micro/nano-scale AM.)

Unit of replication — the independent thing that was repeated (a build, a specimen, a lab), as opposed to repeated measurements of one thing. (See Research starter kit: from reading to first contribution.)

Use-phase savings — emissions avoided while a part is in service, such as fuel saved by a lighter aircraft part. (See Sustainability and life-cycle assessment.)

Utilization (load factor) — the share of time a machine is productively building. (See Cost, throughput and scaling to production.)

Verification and validation — checking the solver is right, then checking the model matches reality. (See Simulation and integrated computational materials engineering.)

Volumetric additive manufacturing — solidifying a whole object at once with projected light patterns. (See Bioprinting and micro/nano-scale AM.)

Voxel — a three-dimensional pixel; a unit volume of printed material. (See Multi-material, functionally graded and 4D printing.)

Wire-arc additive manufacturing (WAAM) — depositing metal wire melted by an electric arc, layer by layer. (See Large-scale AM and construction.)

Witness coupon — a test specimen built alongside parts to check the build. (See Qualification and certification: the central bottleneck.)

Workaround — a practice that avoids a problem rather than solving it, such as freezing a recipe. (See The honest verdict: what industry still cannot do.)

Wrought — metal processed by rolling, forging or extrusion, the usual baseline for comparison. (See Microstructure, anisotropy and process–structure–property links.)

Z-pinning — bridging layers with material deposited across them to counter weakness in the build direction. (See Large-scale AM and construction.)