Skip to main content

References

📍 Where we are: the evidence base for Research Frontiers & Industrial Challenges, gathered in one place.

Every inline citation in this book — written as a bracketed number like [1] — resolves here, grouped by chapter. The numbering restarts in each chapter and matches the [N] markers in that chapter. Entries are identical in every language edition. "Cited by" counts come from Crossref (as of the build date) and only exist for entries with a DOI; standards, official documentation and source repositories carry no count.

Chapter 1 — Preface — Research Frontiers & Industrial Challenges​

  1. DebRoy T, Wei H, Zuback J, Mukherjee T, Elmer J, Milewski J, et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — cited by 8,836
  2. NASA. Technology Readiness Levels. National Aeronautics and Space Administration. https://www.nasa.gov/directorates/somd/space-communications-navigation-program/technology-readiness-levels/
  3. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15

Chapter 2 — Melt-pool physics: keyholes, balling and spatter​

  1. Hooper P. A. (2018). Melt pool temperature and cooling rates in laser powder bed fusion. Additive Manufacturing 22:548-559. https://doi.org/10.1016/j.addma.2018.05.032 — cited by 283
  2. King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, et al. (2015). Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Reviews 2(4):041304. https://doi.org/10.1063/1.4937809 — cited by 1,214
  3. Wang J, Zhu R, Liu Y, Zhang L. (2023). Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization. Advanced Powder Materials 2(4):100137. https://doi.org/10.1016/j.apmate.2023.100137 — cited by 344
  4. Aucott L., Dong H., Mirihanage W., Atwood R., Kidess A., Gao S., et al. (2018). Revealing internal flow behaviour in arc welding and additive manufacturing of metals. Nature Communications 9:5414. https://doi.org/10.1038/s41467-018-07900-9 — cited by 246
  5. Khairallah S. A., Anderson A. T., Rubenchik A., King W. E. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — cited by 2,757
  6. Matthews M. J., Guss G., Khairallah S. A., Rubenchik A. M., Depond P. J., King W. E. (2016). Denudation of metal powder layers in laser powder bed fusion processes. Acta Materialia 114:33-42. https://doi.org/10.1016/j.actamat.2016.05.017 — cited by 782
  7. King W. E., Barth H. D., Castillo V. M., Gallegos G. F., Gibbs J. W., Hahn D. E., et al. (2014). Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. Journal of Materials Processing Technology 214:2915-2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005 — cited by 1,620
  8. Zhao C., Fezzaa K., Cunningham R. W., Wen H., De Carlo F., Chen L., et al. (2017). Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Scientific Reports 7:3602. https://doi.org/10.1038/s41598-017-03761-2 — cited by 570
  9. Cunningham R., Zhao C., Parab N., Kantzos C., Pauza J., Fezzaa K., et al. (2019). Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging. Science 363:849-852. https://doi.org/10.1126/science.aav4687 — cited by 1,064
  10. Huang Y., Fleming T. G., Clark S. J., Marussi S., Fezzaa K., Thiyagalingam J., et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13:1170. https://doi.org/10.1038/s41467-022-28694-x — cited by 432
  11. Martin A. A., Calta N. P., Khairallah S. A., Wang J., Depond P. J., Fong A. Y., et al. (2019). Dynamics of pore formation during laser powder bed fusion additive manufacturing. Nature Communications 10:1987. https://doi.org/10.1038/s41467-019-10009-2 — cited by 686
  12. Zhao C., Parab N. D., Li X., Fezzaa K., Tan W., Rollett A. D., et al. (2020). Critical instability at moving keyhole tip generates porosity in laser melting. Science 370:1080-1086. https://doi.org/10.1126/science.abd1587 — cited by 685
  13. Gan Z., Kafka O. L., Parab N., Zhao C., Fang L., Heinonen O., et al. (2021). Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nature Communications 12:2379. https://doi.org/10.1038/s41467-021-22704-0 — cited by 253
  14. Khairallah S. A., Martin A. A., Lee J. R. I., Guss G., Calta N. P., Hammons J. A., et al. (2020). Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing. Science 368:660-665. https://doi.org/10.1126/science.aay7830 — cited by 500
  15. Ren Z., Gao L., Clark S. J., Fezzaa K., Shevchenko P., Choi A., et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379:89-94. https://doi.org/10.1126/science.add4667 — cited by 337
  16. Ren Z., Shao J., Liu H., Clark S. J., Gao L., Balderson L., et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3:045001. https://doi.org/10.1088/2752-5724/ad89e2 — cited by 17

Chapter 3 — Defects, residual stress and distortion​

  1. Snow Z., Nassar A. R., Reutzel E. W. (2020). Invited Review Article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Additive Manufacturing 36:101457. https://doi.org/10.1016/j.addma.2020.101457 — cited by 108
  2. Tang M., Pistorius P. C., Beuth J. L. (2017). Prediction of lack-of-fusion porosity for powder bed fusion. Additive Manufacturing 14:39-48. https://doi.org/10.1016/j.addma.2016.12.001 — cited by 289
  3. Gordon J. V., Narra S. P., Cunningham R. W., Liu H., Chen H., Suter R. M., et al. (2020). Defect structure process maps for laser powder bed fusion additive manufacturing. Additive Manufacturing 36:101552. https://doi.org/10.1016/j.addma.2020.101552 — cited by 155
  4. Hojjatzadeh S. M. H., Parab N. D., Yan W., Guo Q., Xiong L., Zhao C., et al. (2019). Pore elimination mechanisms during 3D printing of metals. Nature Communications 10:3088. https://doi.org/10.1038/s41467-019-10973-9 — cited by 305
  5. Zhang K., Chen Y., Marussi S., Fan X., Fitzpatrick M., Bhagavath S., et al. (2024). Pore evolution mechanisms during directed energy deposition additive manufacturing. Nature Communications 15:1715. https://doi.org/10.1038/s41467-024-45913-9 — cited by 187
  6. Kou S. (2015). A criterion for cracking during solidification. Acta Materialia 88:366-374. https://doi.org/10.1016/j.actamat.2015.01.034 — cited by 931
  7. Martin J. H., Yahata B. D., Hundley J. M., Mayer J. A., Schaedler T. A., Pollock T. M. (2017). 3D printing of high-strength aluminium alloys. Nature 549:365-369. https://doi.org/10.1038/nature23894 — cited by 2,956
  8. Chauvet E., Kontis P., Jägle E. A., Gault B., Raabe D., Tassin C., et al. (2018). Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting. Acta Materialia 142:82-94. https://doi.org/10.1016/j.actamat.2017.09.047 — cited by 617
  9. Liu Z., Zhou Q., Liang X., Wang X., Li G., Vanmeensel K., et al. (2024). Alloy design for laser powder bed fusion additive manufacturing: a critical review. International Journal of Extreme Manufacturing 6:022002. https://doi.org/10.1088/2631-7990/ad1657 — cited by 121
  10. Sun Z., Ma Y., Ponge D., Zaefferer S., Jägle E. A., Gault B., et al. (2022). Thermodynamics-guided alloy and process design for additive manufacturing. Nature Communications 13(1):4361. https://doi.org/10.1038/s41467-022-31969-y — cited by 131
  11. Mercelis P., Kruth J. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal 12:254-265. https://doi.org/10.1108/13552540610707013 — cited by 1,908
  12. Kruth J. P., Deckers J., Yasa E., Wauthlé R. (2012). Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:980-991. https://doi.org/10.1177/0954405412437085 — cited by 489
  13. Bartlett J. L., Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — cited by 259
  14. Li C., Liu Z., Fang X., Guo Y. (2018). Residual Stress in Metal Additive Manufacturing. Procedia CIRP 71:348-353. https://doi.org/10.1016/j.procir.2018.05.039 — cited by 690
  15. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  1. Kok Y., Tan X., Wang P., Nai M., Loh N., Liu E., et al. (2018). Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design 139:565-586. https://doi.org/10.1016/j.matdes.2017.11.021 — cited by 1,443
  2. DebRoy T., Wei H., Zuback J., Mukherjee T., Elmer J., Milewski J., et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — cited by 8,836
  3. Wang Y. M., Voisin T., McKeown J. T., Ye J., Calta N. P., Li Z., et al. (2017). Additively manufactured hierarchical stainless steels with high strength and ductility. Nature Materials 17:63-71. https://doi.org/10.1038/nmat5021 — cited by 2,602
  4. Voisin T., Forien J. B., Perron A., Aubry S., Bertin N., Samanta A., et al. (2021). New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion. Acta Materialia 203:116476. https://doi.org/10.1016/j.actamat.2020.11.018 — cited by 631
  5. Ren N., Li J., Zhang R., Panwisawas C., Xia M., Dong H., et al. (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nature Communications 14(1):7990. https://doi.org/10.1038/s41467-023-43563-x — cited by 221
  6. Dehoff R. R., Kirka M. M., Sames W. J., Bilheux H., Tremsin A. S., Lowe L. E., et al. (2015). Site specific control of crystallographic grain orientation through electron beam additive manufacturing. Materials Science and Technology 31:931-938. https://doi.org/10.1179/1743284714Y.0000000734 — cited by 536
  7. Martin J. H., Yahata B. D., Hundley J. M., Mayer J. A., Schaedler T. A., Pollock T. M. (2017). 3D printing of high-strength aluminium alloys. Nature 549:365-369. https://doi.org/10.1038/nature23894 — cited by 2,956
  8. Brooke R., Zhang D., Qiu D., Gibson M. A., Easton M. (2025). Compositional criteria to predict columnar to equiaxed transitions in metal additive manufacturing. Nature Communications 16(1):5710. https://doi.org/10.1038/s41467-025-60162-0 — cited by 70
  9. Todaro C. J., Easton M. A., Qiu D., Zhang D., Bermingham M. J., Lui E. W., et al. (2020). Grain structure control during metal 3D printing by high-intensity ultrasound. Nature Communications 11:142. https://doi.org/10.1038/s41467-019-13874-z — cited by 846
  10. Kürnsteiner P., Wilms M. B., Weisheit A., Gault B., Jägle E. A., Raabe D. (2020). High-strength Damascus steel by additive manufacturing. Nature 582:515-519. https://doi.org/10.1038/s41586-020-2409-3 — cited by 517
  11. Lewandowski J. J., Seifi M. (2016). Metal Additive Manufacturing: A Review of Mechanical Properties. Annual Review of Materials Research 46:151-186. https://doi.org/10.1146/annurev-matsci-070115-032024 — cited by 1,626
  12. Yadollahi A., Shamsaei N. (2017). Additive manufacturing of fatigue resistant materials: Challenges and opportunities. International Journal of Fatigue 98:14-31. https://doi.org/10.1016/j.ijfatigue.2017.01.001 — cited by 988
  13. Sanaei N., Fatemi A. (2021). Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. Progress in Materials Science 117:100724. https://doi.org/10.1016/j.pmatsci.2020.100724 — cited by 1,006
  14. Ye C., Zhang C., Zhao J., Dong Y. (2021). Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review. Journal of Materials Engineering and Performance 30(9):6407-6425. https://doi.org/10.1007/s11665-021-06021-7 — cited by 250
  15. Hu Z., Yan W. (2024). Data-driven modeling of process-structure-property relationships in metal additive manufacturing. npj Advanced Manufacturing 1:3. https://doi.org/10.1038/s44334-024-00003-y — cited by 56
  16. Moser N., Benzing J., Kafka O. L., Weaver J., Derimow N., Rentz R., et al. (2024). AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions. Integrating Materials and Manufacturing Innovation 13:155-174. https://doi.org/10.1007/s40192-023-00333-3 — cited by 7

Chapter 5 — Simulation and integrated computational materials engineering​

  1. Francois M., Sun A., King W., Henson N., Tourret D., Bronkhorst C., et al. (2017). Modeling of additive manufacturing processes for metals: Challenges and opportunities. Current Opinion in Solid State and Materials Science 21:198-206. https://doi.org/10.1016/j.cossms.2016.12.001 — cited by 431
  2. King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, et al. (2015). Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Reviews 2(4):041304. https://doi.org/10.1063/1.4937809 — cited by 1,214
  3. Khairallah S. A., Anderson A. T., Rubenchik A., King W. E. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — cited by 2,757
  4. Gan Z., Kafka O. L., Parab N., Zhao C., Fang L., Heinonen O., et al. (2021). Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nature Communications 12:2379. https://doi.org/10.1038/s41467-021-22704-0 — cited by 253
  5. Panwisawas C., Qiu C., Anderson M. J., Sovani Y., Turner R. P., Attallah M. M., et al. (2017). Mesoscale modelling of selective laser melting: Thermal fluid dynamics and microstructural evolution. Computational Materials Science 126:479-490. https://doi.org/10.1016/j.commatsci.2016.10.011 — cited by 316
  6. Rodgers T. M., Madison J. D., Tikare V. (2017). Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo. Computational Materials Science 135:78-89. https://doi.org/10.1016/j.commatsci.2017.03.053 — cited by 345
  7. Keller T., Lindwall G., Ghosh S., Ma L., Lane B. M., Zhang F., et al. (2017). Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys. Acta Materialia 139:244-253. https://doi.org/10.1016/j.actamat.2017.05.003 — cited by 424
  8. Bayat M, Dong W, Thorborg J, To AC, Hattel JH. (2021). A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies. Additive Manufacturing 47:102278. https://doi.org/10.1016/j.addma.2021.102278
  9. Liang X., Chen Q., Cheng L., Hayduke D., To A. C. (2019). Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components. Computational Mechanics 64:1719-1733. https://doi.org/10.1007/s00466-019-01748-6 — cited by 141
  10. Mukherjee T, Wei H, De A, DebRoy T. (2018). Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion. Computational Materials Science 150:304-313. https://doi.org/10.1016/j.commatsci.2018.04.022 — cited by 207
  11. Yang M, Wang L, Yan W. (2021). Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening. npj Computational Materials 7(1):56. https://doi.org/10.1038/s41524-021-00524-6 — cited by 251
  12. Ren N, Li J, Zhang R, Panwisawas C, Xia M, Dong H, et al. (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nature Communications 14(1):7990. https://doi.org/10.1038/s41467-023-43563-x — cited by 221
  13. Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — cited by 259
  14. Smith J., Xiong W., Yan W., Lin S., Cheng P., Kafka O. L., et al. (2016). Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support. Computational Mechanics 57:583-610. https://doi.org/10.1007/s00466-015-1240-4 — cited by 248
  15. Yan W., Lin S., Kafka O. L., Lian Y., Yu C., Liu Z., et al. (2018). Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing. Computational Mechanics 61:521-541. https://doi.org/10.1007/s00466-018-1539-z — cited by 225
  16. Levine L., Lane B., Heigel J., Migler K., Stoudt M., Phan T., et al. (2020). Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 9:1-15. https://doi.org/10.1007/s40192-019-00164-1 — cited by 77
  17. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  18. Moser N., Benzing J., Kafka O. L., Weaver J., Derimow N., Rentz R., et al. (2024). AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions. Integrating Materials and Manufacturing Innovation 13:155-174. https://doi.org/10.1007/s40192-023-00333-3 — cited by 7

Chapter 6 — Machine learning for additive manufacturing​

  1. Meng L., McWilliams B., Jarosinski W., Park H. Y., Jung Y. G., Lee J., et al. (2020). Machine Learning in Additive Manufacturing: A Review. JOM 72:2363-2377. https://doi.org/10.1007/s11837-020-04155-y — cited by 433
  2. Wang C., Tan X., Tor S., Lim C. (2020). Machine learning in additive manufacturing: State-of-the-art and perspectives. Additive Manufacturing 36:101538. https://doi.org/10.1016/j.addma.2020.101538 — cited by 399
  3. Qin J, Hu F, Liu Y, Witherell P, Wang CC, Rosen DW, et al. (2022). Research and application of machine learning for additive manufacturing. Additive Manufacturing 52:102691. https://doi.org/10.1016/j.addma.2022.102691 — cited by 221
  4. Guo S, Agarwal M, Cooper C, Tian Q, Gao RX, Guo W, et al. (2022). Machine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm. Journal of Manufacturing Systems 62:145-163. https://doi.org/10.1016/j.jmsy.2021.11.003 — cited by 326
  5. Faegh M, Ghungrad S, Oliveira JP, Rao P, Haghighi A. (2025). A review on physics-informed machine learning for process-structure-property modeling in additive manufacturing. Journal of Manufacturing Processes 133:524-555. https://doi.org/10.1016/j.jmapro.2024.11.066 — cited by 124
  6. Samadiani N., Barnard A. S., Gunasegaram D., Fayyazifar N. (2024). Best practices for machine learning strategies aimed at process parameter development in powder bed fusion additive manufacturing. Journal of Intelligent Manufacturing 36:4477-4517. https://doi.org/10.1007/s10845-024-02490-4 — cited by 23
  7. Gongora A. E., Xu B., Perry W., Okoye C., Riley P., Reyes K. G., et al. (2020). A Bayesian experimental autonomous researcher for mechanical design. Science Advances 6:eaaz1708. https://doi.org/10.1126/sciadv.aaz1708 — cited by 289
  8. Scime L., Beuth J. (2018). Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm. Additive Manufacturing 19:114-126. https://doi.org/10.1016/j.addma.2017.11.009 — cited by 262
  9. Ren Z., Gao L., Clark S. J., Fezzaa K., Shevchenko P., Choi A., et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379:89-94. https://doi.org/10.1126/science.add4667 — cited by 337
  10. Ren Z., Shao J., Liu H., Clark S. J., Gao L., Balderson L., et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3:045001. https://doi.org/10.1088/2752-5724/ad89e2 — cited by 17
  11. Zhu Q., Liu Z., Yan J. (2021). Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks. Computational Mechanics 67:619-635. https://doi.org/10.1007/s00466-020-01952-9 — cited by 508
  12. Pandiyan V., Drissi-Daoudi R., Shevchik S., Masinelli G., Le-Quang T., Logé R., et al. (2022). Deep transfer learning of additive manufacturing mechanisms across materials in metal-based laser powder bed fusion process. Journal of Materials Processing Technology 303:117531. https://doi.org/10.1016/j.jmatprotec.2022.117531 — cited by 157
  13. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  14. Akbari P, Ogoke F, Kao NY, Meidani K, Yeh CY, Lee W, et al. (2022). MeltpoolNet: Melt pool characteristic prediction in Metal Additive Manufacturing using machine learning. Additive Manufacturing 55:102817. https://doi.org/10.1016/j.addma.2022.102817 — cited by 84
  15. Hu Z., Yan W. (2024). Data-driven modeling of process-structure-property relationships in metal additive manufacturing. npj Advanced Manufacturing 1:3. https://doi.org/10.1038/s44334-024-00003-y — cited by 56

Chapter 7 — In-situ monitoring and metrology​

  1. Everton SK, Hirsch M, Stravroulakis P, Leach RK, Clare AT. (2016). Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design 95:431-445. https://doi.org/10.1016/j.matdes.2016.01.099 — cited by 1,396
  2. Grasso M, Colosimo BM. (2017). Process defects and in situ monitoring methods in metal powder bed fusion: a review. Measurement Science and Technology 28(4):044005. https://doi.org/10.1088/1361-6501/aa5c4f — cited by 824
  3. Grasso M, Remani A, Dickins A, Colosimo BM, Leach RK. (2021). In-situ measurement and monitoring methods for metal powder bed fusion: an updated review. Measurement Science and Technology 32(11):112001. https://doi.org/10.1088/1361-6501/ac0b6b — cited by 231
  4. Fox J, Kim F, Lane B, Praniewicz M, Tondare V, Weaver J, et al. (2024). In-process monitoring and non-destructive evaluation for metal additive manufacturing processes. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ir.8538 — cited by 5
  5. McCann R, Obeidi MA, Hughes C, McCarthy É, Egan DS, Vijayaraghavan RK, et al. (2021). In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: A review. Additive Manufacturing 45:102058. https://doi.org/10.1016/j.addma.2021.102058 — cited by 180
  6. Moshiri M, Pedersen DB, Tosello G, Nadimpalli VK. (2023). Performance evaluation of in-situ near-infrared melt pool monitoring during laser powder bed fusion. Virtual and Physical Prototyping 18(1):e2205387. https://doi.org/10.1080/17452759.2023.2205387 — cited by 26
  7. Zhang Y, Hong GS, Ye D, Zhu K, Fuh JY. (2018). Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring. Materials & Design 156:458-469. https://doi.org/10.1016/j.matdes.2018.07.002
  8. Ero O, Taherkhani K, Toyserkani E. (2023). Optical tomography and machine learning for in-situ defects detection in laser powder bed fusion: A self-organizing map and U-Net based approach. Additive Manufacturing 78:103894. https://doi.org/10.1016/j.addma.2023.103894 — cited by 19
  9. Aydogan B, Chou K. (2024). Review of In Situ Detection and Ex Situ Characterization of Porosity in Laser Powder Bed Fusion Metal Additive Manufacturing. Metals 14(6):669. https://doi.org/10.3390/met14060669 — cited by 27
  10. Zhao C, Fezzaa K, Cunningham RW, Wen H, De Carlo F, Chen L, et al. (2017). Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Scientific Reports 7(1):3602. https://doi.org/10.1038/s41598-017-03761-2 — cited by 570
  11. Ren Z, Gao L, Clark SJ, Fezzaa K, Shevchenko P, Choi A, et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379(6627):89-94. https://doi.org/10.1126/science.add4667 — cited by 337
  12. Hamidi Nasab M, Masinelli G, de Formanoir C, Schlenger L, Van Petegem S, Esmaeilzadeh R, et al. (2023). Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting. Nature Communications 14(1):8008. https://doi.org/10.1038/s41467-023-43371-3 — cited by 75
  13. Galiègue L, Briffod F, Ito K, Masuo H, Watanabe M, Shiraiwa T, et al. (2025). Acoustic emission monitoring reveals keyhole formation and evolution. Scientific Reports 15(1):43243. https://doi.org/10.1038/s41598-025-27232-1 — cited by 8
  14. Ren Z, Shao J, Liu H, Clark SJ, Gao L, Balderson L, et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3(4):045001. https://doi.org/10.1088/2752-5724/ad89e2 — cited by 17
  15. Liu H, Guirguis D, Zeng X, Maurer L, Rajan V, Sanaei N, et al. (2026). Airborne acoustic emission enables sub-scanline keyhole porosity quantification and effective process characterization for metallic laser powder bed fusion. Additive Manufacturing 116:105062. https://doi.org/10.1016/j.addma.2025.105062 — cited by 0
  16. AbouelNour Y, Gupta N. (2022). In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review. Materials & Design 222:111063. https://doi.org/10.1016/j.matdes.2022.111063 — cited by 193
  17. Snow Z, Scime L, Ziabari A, Fisher B, Paquit V. (2023). Scalable in situ non-destructive evaluation of additively manufactured components using process monitoring, sensor fusion, and machine learning. Additive Manufacturing 78:103817. https://doi.org/10.1016/j.addma.2023.103817 — cited by 25
  18. EOS GmbH. EOS Smart Monitoring — in-situ AM process monitoring and quality assurance (vendor product page). https://www.eos.info/enablement/software/eos-smart-monitoring

Chapter 8 — Closed-loop process control​

  1. Wang R, Standfield B, Dou C, Law AC, Kong ZJ. (2023). Real-time process monitoring and closed-loop control on laser power via a customized laser powder bed fusion platform. Additive Manufacturing 66:103449. https://doi.org/10.1016/j.addma.2023.103449 — cited by 39
  2. Yeung H. (2025). Toward real-time feedback control for powder bed fusion additive manufacturing. Additive Manufacturing 114:105041. https://doi.org/10.1016/j.addma.2025.105041 — cited by 3
  3. Mani M, Lane B, Donmez A, Feng S, Moylan S, Fesperman R. (2015). Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes. National Institute of Standards and Technology. https://doi.org/10.6028/nist.ir.8036 — cited by 171
  4. Grasso M, Colosimo BM. (2017). Process defects and in situ monitoring methods in metal powder bed fusion: a review. Measurement Science and Technology 28(4):044005. https://doi.org/10.1088/1361-6501/aa5c4f — cited by 824
  5. Liao-McPherson D, Balta EC, Afrasiabi M, Rupenyan A, Bambach M, Lygeros J. (2025). Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion. IEEE Transactions on Control Systems Technology 33(1):207-218. https://doi.org/10.1109/tcst.2024.3464118 — cited by 15
  6. Smoqi Z, Bevans BD, Gaikwad A, Craig J, Abul-Haj A, Roeder B, et al. (2022). Closed-loop control of meltpool temperature in directed energy deposition. Materials & Design 215:110508. https://doi.org/10.1016/j.matdes.2022.110508 — cited by 97
  7. Shin S, Jeon I, Sohn H. (2025). Enhanced geometric accuracy in directed energy deposition via closed-loop melt pool height control using real-time thermal imaging. Additive Manufacturing 109:104846. https://doi.org/10.1016/j.addma.2025.104846 — cited by 6
  8. Song L, Bagavath-Singh V, Dutta B, Mazumder J. (2011). Control of melt pool temperature and deposition height during direct metal deposition process. The International Journal of Advanced Manufacturing Technology 58(1-4):247-256. https://doi.org/10.1007/s00170-011-3395-2
  9. Wang Q, Li J, Nassar AR, Reutzel EW, Mitchell WF. (2021). Model-Based Feedforward Control of Part Height in Directed Energy Deposition. Materials 14(2):337. https://doi.org/10.3390/ma14020337 — cited by 25
  10. Ye L, Xue H, Li Z, Zhou Y, Chen G, Xu F, et al. (2025). Review of online quality control for laser directed energy deposition (LDED) additive manufacturing. International Journal of Extreme Manufacturing 7(6):062005. https://doi.org/10.1088/2631-7990/aded4f — cited by 55
  11. Singh M, Ravi K. (2026). Plasma plume emission-driven closed-loop control in directed energy deposition. Materials & Design 269:116730. https://doi.org/10.1016/j.matdes.2026.116730 — cited by 0
  12. Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — cited by 20
  13. McCann R, Obeidi MA, Hughes C, McCarthy É, Egan DS, Vijayaraghavan RK, et al. (2021). In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: A review. Additive Manufacturing 45:102058. https://doi.org/10.1016/j.addma.2021.102058 — cited by 180
  14. Hong G, Cho J, Cho H. (2026). Ontology-enabled neuro-symbolic closed-loop control of laser powder bed fusion. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-026-03006-y — cited by 0
  15. Kavas B, Balta EC, Tucker MR, Krishnadas R, Rupenyan A, Lygeros J, et al. (2025). In-situ controller autotuning by Bayesian optimization for closed-loop feedback control of laser powder bed fusion process. Additive Manufacturing 99:104641. https://doi.org/10.1016/j.addma.2025.104641 — cited by 10
  16. Cai Y, Xiong J, Chen H, Zhang G. (2023). A review of in-situ monitoring and process control system in metal-based laser additive manufacturing. Journal of Manufacturing Systems 70:309-326. https://doi.org/10.1016/j.jmsy.2023.07.018 — cited by 254

Chapter 9 — Alloys for AM and the powder problem​

  1. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. (2017). 3D printing of high-strength aluminium alloys. Nature 549(7672):365-369. https://doi.org/10.1038/nature23894 — cited by 2,956
  2. Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS. (2016). The metallurgy and processing science of metal additive manufacturing. International Materials Reviews 61(5):315-360. https://doi.org/10.1080/09506608.2015.1116649 — cited by 2,383
  3. Sing SL, Yeong WY. (2020). Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments. Virtual and Physical Prototyping 15(3):359-370. https://doi.org/10.1080/17452759.2020.1779999 — cited by 387
  4. Wu C, Wen J, Zhang J, Song B, Shi Y. (2024). Additive manufacturing of heat-resistant aluminum alloys: a review. International Journal of Extreme Manufacturing 6(6):062013. https://doi.org/10.1088/2631-7990/ad7f2e — cited by 57
  5. Smith TM, Kantzos CA, Zarkevich NA, Harder BJ, Heczko M, Gradl PR, et al. (2023). A 3D printable alloy designed for extreme environments. Nature 617(7961):513-518. https://doi.org/10.1038/s41586-023-05893-0 — cited by 280
  6. Zhao Y, Ma Z, Yu L, Liu Y. (2023). New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys. Acta Materialia 247:118736. https://doi.org/10.1016/j.actamat.2023.118736 — cited by 240
  7. Funch CV, Proust G. (2024). Laser-based additive manufacturing of refractory metals and their alloys: A review. Additive Manufacturing 94:104464. https://doi.org/10.1016/j.addma.2024.104464 — cited by 29
  8. Mohammadnejad A, Sun M, Yarlapati NA, Hasanabadi M, Sadeghi E, Karimi P, et al. (2025). Additive manufacturing of refractory high-entropy alloys: A critical review of fundamentals and advances. Materials & Design 260:115261. https://doi.org/10.1016/j.matdes.2025.115261 — cited by 33
  9. Mooraj S, Kim G, Fan X, Samuha S, Xie Y, Li T, et al. (2024). Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders. Communications Materials 5(1):14. https://doi.org/10.1038/s43246-024-00452-0 — cited by 71
  10. Taghian M, Pilehvar Meibody A, Saboori A, Iuliano L. (2025). Challenges and opportunities in additive manufacturing of high entropy alloys. Journal of Alloys and Compounds 1034:181450. https://doi.org/10.1016/j.jallcom.2025.181450 — cited by 49
  11. Jarlöv A, Zhu Z, Ji W, Gao S, Hu Z, Vivegananthan P, et al. (2024). Recent progress in high-entropy alloys for laser powder bed fusion: Design, processing, microstructure, and performance. Materials Science and Engineering: R: Reports 161:100834. https://doi.org/10.1016/j.mser.2024.100834 — cited by 81
  12. Delacroix T, Lomello F, Schuster F, Maskrot H, Baslari C, Gaumet U, et al. (2023). Influence of build characteristics and chamber oxygen concentration on powder degradation in laser powder bed fusion. Powder Technology 416:118231. https://doi.org/10.1016/j.powtec.2023.118231 — cited by 29
  13. Soltani-Tehrani A, Isaac JP, Tippur HV, Silva DF, Shao S, Shamsaei N. (2023). Ti-6Al-4V powder reuse in laser powder bed fusion (L-PBF): The effect on porosity, microstructure, and mechanical behavior. International Journal of Fatigue 167:107343. https://doi.org/10.1016/j.ijfatigue.2022.107343 — cited by 75
  14. Ardila L, Garciandia F, González-Díaz J, Álvarez P, Echeverria A, Petite M, et al. (2014). Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting. Physics Procedia 56:99-107. https://doi.org/10.1016/j.phpro.2014.08.152
  15. Cordova L, Campos M, Tinga T. (2019). Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization. JOM 71(3):1062-1072. https://doi.org/10.1007/s11837-018-3305-2
  16. Tang HP, Qian M, Liu N, Zhang XZ, Yang GY, Wang J. (2015). Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting. JOM 67(3):555-563. https://doi.org/10.1007/s11837-015-1300-4
  17. Sun X, Chen M, Liu T, Zhang K, Wei H, Zhu Z, et al. (2023). Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review. International Journal of Extreme Manufacturing 6(1):012003. https://doi.org/10.1088/2631-7990/acfbc3 — cited by 86

Chapter 10 — Multi-material, functionally graded and 4D printing​

  1. Bandyopadhyay A, Heer B. (2018). Additive manufacturing of multi-material structures. Materials Science and Engineering: R: Reports 129:1-16. https://doi.org/10.1016/j.mser.2018.04.001 — cited by 1,019
  2. Hofmann DC, Kolodziejska J, Roberts S, Otis R, Dillon RP, Suh JO, et al. (2014). Compositionally graded metals: A new frontier of additive manufacturing. Journal of Materials Research 29(17):1899-1910. https://doi.org/10.1557/jmr.2014.208 — cited by 254
  3. Skylar-Scott MA, Mueller J, Visser CW, Lewis JA. (2019). Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575(7782):330-335. https://doi.org/10.1038/s41586-019-1736-8 — cited by 1,032
  4. Kenny V, Yang G, Bapat S, Malshe AP. (2026). Interfacial integrity in multi-metal additive manufacturing: challenges, mechanisms, and processing strategies. Progress in Additive Manufacturing 11(10):10071-10099. https://doi.org/10.1007/s40964-026-01888-1 — cited by 2
  5. Wu Z, Wilson-Heid AE, Griffiths RJ, Elton ES. (2023). A review on experimentally observed mechanical and microstructural characteristics of interfaces in multi-material laser powder bed fusion. Frontiers in Mechanical Engineering 9:1087021. https://doi.org/10.3389/fmech.2023.1087021 — cited by 24
  6. Ostolaza M, Arrizubieta JI, Lamikiz A, Plaza S, Ortega N. (2023). Latest Developments to Manufacture Metal Matrix Composites and Functionally Graded Materials through AM: A State-of-the-Art Review. Materials 16(4):1746. https://doi.org/10.3390/ma16041746 — cited by 101
  7. Baroutaji A, Arjunan A, Robinson J, Djavanroodi F, Khan M, Vance A, et al. (2026). A critical review on metal multi-material additive manufacturing: Advancements, challenges, and prospects. Journal of Materials Research and Technology 44:4455-4476. https://doi.org/10.1016/j.jmrt.2026.08.209 — cited by 0
  8. Ghanavati R, Mosallanejad MH, Behjat A, Taghian M, Fino P, Iuliano L, et al. (2026). Multi-material processing of metallic components by direct additive manufacturing methods: technologies, scientific insights, and industrial applications. International Journal of Extreme Manufacturing 8(4):042004. https://doi.org/10.1088/2631-7990/ae5295 — cited by 9
  9. Ma Z, Liu W, Li W, Liu H, Song J, Liu Y, et al. (2024). Additive manufacturing of functional gradient materials: A review of research progress and challenges. Journal of Alloys and Compounds 971:172642. https://doi.org/10.1016/j.jallcom.2023.172642 — cited by 130
  10. Gradl PR, Protz CS, Zagorski K, Doshi V, McCallum H. (2019). Additive Manufacturing and Hot-fire Testing of Bimetallic GRCop-84 and C-18150 Channel-Cooled Combustion Chambers Using Powder Bed Fusion and Inconel 625 Hybrid Directed Energy Deposition. AIAA Propulsion and Energy 2019 Forum. https://doi.org/10.2514/6.2019-4390 — cited by 22
  11. Gradl PR, Teasley TW, Protz CS, Garcia MB, Ellis D, Kantzos C. (2021). Advancing GRCop-based Bimetallic Additive Manufacturing to Optimize Component Design and Applications for Liquid Rocket Engines. AIAA Propulsion and Energy 2021 Forum. https://doi.org/10.2514/6.2021-3231 — cited by 30
  12. Clare A, Woizeschke P, Rankouhi B, Pfefferkorn F, Bartels D, Schmidt M, et al. (2025). Metal multi-material additive manufacturing: Overcoming barriers to implementation. CIRP Annals 74(2):869-893. https://doi.org/10.1016/j.cirp.2025.05.004 — cited by 52
  13. Espera AH, Dizon JRC, Chen Q, Advincula RC. (2019). 3D-printing and advanced manufacturing for electronics. Progress in Additive Manufacturing 4(3):245-267. https://doi.org/10.1007/s40964-019-00077-7
  14. Kamyshny A, Magdassi S. (2019). Conductive nanomaterials for 2D and 3D printed flexible electronics. Chemical Society Reviews 48(6):1712-1740. https://doi.org/10.1039/c8cs00738a
  15. Słoma M. (2023). 3D printed electronics with nanomaterials. Nanoscale 15(12):5623-5648. https://doi.org/10.1039/d2nr06771d — cited by 73
  16. Yan S, Zhang F, Luo L, Wang L, Liu Y, Leng J. (2023). Shape Memory Polymer Composites: 4D Printing, Smart Structures, and Applications. Research 6:0234. https://doi.org/10.34133/research.0234 — cited by 141
  17. Ge Q, Sakhaei AH, Lee H, Dunn CK, Fang NX, Dunn ML. (2016). Multimaterial 4D Printing with Tailorable Shape Memory Polymers. Scientific Reports 6(1):31110. https://doi.org/10.1038/srep31110 — cited by 1,083
  18. Sydney Gladman A, Matsumoto EA, Nuzzo RG, Mahadevan L, Lewis JA. (2016). Biomimetic 4D printing. Nature Materials 15(4):413-418. https://doi.org/10.1038/nmat4544 — cited by 3,005
  19. Hassan M, Mohanty AK, Wang T, Dhakal HN, Misra M. (2025). Current status and future outlook of 4D printing of polymers and composites-A prospective. Composites Part C: Open Access 17:100602. https://doi.org/10.1016/j.jcomc.2025.100602 — cited by 31
  20. Ding A, Tang F, Alsberg E. (2025). The Emerging 4D Printing of Shape‐Memory Thermomorphs for Self‐Adaptative Biomedical Implants. Advanced Functional Materials 35(28):2418348. https://doi.org/10.1002/adfm.202418348 — cited by 52
  21. Cicek UI, Southee DJ, Johnson AA. (2023). 2D characterisation and evaluation of multi-material structures towards 3D hybrid printing. Virtual and Physical Prototyping 18(1):e2181193. https://doi.org/10.1080/17452759.2023.2181193 — cited by 11

Chapter 11 — Bioprinting and micro/nano-scale AM​

  1. Murphy SV, De Coppi P, Atala A. (2019). Opportunities and challenges of translational 3D bioprinting. Nature Biomedical Engineering 4(4):370-380. https://doi.org/10.1038/s41551-019-0471-7 — cited by 530
  2. Murphy SV, Atala A. (2014). 3D bioprinting of tissues and organs. Nature Biotechnology 32(8):773-785. https://doi.org/10.1038/nbt.2958 — cited by 6,663
  3. Moroni L, Boland T, Burdick JA, De Maria C, Derby B, Forgacs G, et al. (2018). Biofabrication: A Guide to Technology and Terminology. Trends in Biotechnology 36(4):384-402. https://doi.org/10.1016/j.tibtech.2017.10.015 — cited by 611
  4. Xu HQ, Liu JC, Zhang ZY, Xu CX. (2022). A review on cell damage, viability, and functionality during 3D bioprinting. Military Medical Research 9(1):70. https://doi.org/10.1186/s40779-022-00429-5 — cited by 159
  5. Li B, Wang Z, Huang C, Xu L, Huang S, Qu M, et al. (2025). A comprehensive review on the printing efficiency, precision, and cell viability in 3D bioprinting. Medical Engineering & Physics 145(1):104448. https://doi.org/10.1016/j.medengphy.2025.104448 — cited by 27
  6. Elango J, Zamora-Ledezma C. (2025). Rheological, Structural, and Biological Trade-Offs in Bioink Design for 3D Bioprinting. Gels 11(8):659. https://doi.org/10.3390/gels11080659 — cited by 85
  7. Gungor-Ozkerim PS, Inci I, Zhang YS, Khademhosseini A, Dokmeci MR. (2018). Bioinks for 3D bioprinting: an overview. Biomaterials Science 6(5):915-946. https://doi.org/10.1039/c7bm00765e — cited by 1,414
  8. Malda J, Visser J, Melchels FP, Jüngst T, Hennink WE, Dhert WJA, et al. (2013). 25th Anniversary Article: Engineering Hydrogels for Biofabrication. Advanced Materials 25(36):5011-5028. https://doi.org/10.1002/adma.201302042 — cited by 1,823
  9. Skylar-Scott MA, Uzel SGM, Nam LL, Ahrens JH, Truby RL, Damaraju S, et al. (2019). Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels. Science Advances 5(9):eaaw2459. https://doi.org/10.1126/sciadv.aaw2459 — cited by 981
  10. Grigoryan B, Paulsen SJ, Corbett DC, Sazer DW, Fortin CL, Zaita AJ, et al. (2019). Multivascular networks and functional intravascular topologies within biocompatible hydrogels. Science 364(6439):458-464. https://doi.org/10.1126/science.aav9750 — cited by 1,411
  11. Kelly BE, Bhattacharya I, Heidari H, Shusteff M, Spadaccini CM, Taylor HK. (2019). Volumetric additive manufacturing via tomographic reconstruction. Science 363(6431):1075-1079. https://doi.org/10.1126/science.aau7114 — cited by 1,024
  12. Loterie D, Delrot P, Moser C. (2020). High-resolution tomographic volumetric additive manufacturing. Nature Communications 11(1):852. https://doi.org/10.1038/s41467-020-14630-4 — cited by 468
  13. 3DBio Therapeutics. (2022, June 2). 3DBio Therapeutics and the Microtia-Congenital Ear Deformity Institute conduct human ear reconstruction using 3D-bioprinted living tissue implant in a first-in-human clinical trial (press release). https://www.businesswire.com/news/home/20220602005051/en/3DBio-Therapeutics-and-the-Microtia-Congenital-Ear-Deformity-Institute-Conduct-Human-Ear-Reconstruction-Using-3D-Bioprinted-Living-Tissue-Implant-in-a-First-in-Human-Clinical-Trial
  14. ClinicalTrials.gov. (record NCT04399239). AuriNovo for Auricular Reconstruction (sponsor: 3DBio Therapeutics; status: terminated; actual enrollment 2; no results posted). U.S. National Library of Medicine. https://clinicaltrials.gov/study/NCT04399239
  15. Perin F, Ouyang L, Lim KS, Motta A, Maniglio D, Moroni L, et al. (2025). Bioprinted Constructs in the Regulatory Landscape: Current State and Future Perspectives. Advanced Materials 38(4):e04037. https://doi.org/10.1002/adma.202504037 — cited by 56
  16. Mathur V, Agarwal P, Kasturi M, Srinivasan V, Seetharam RN, Vasanthan KS. (2025). Innovative bioinks for 3D bioprinting: Exploring technological potential and regulatory challenges. Journal of Tissue Engineering 16:20417314241308022. https://doi.org/10.1177/20417314241308022 — cited by 107
  17. Ouyang W, Xu X, Lu W, Zhao N, Han F, Chen SC. (2023). Ultrafast 3D nanofabrication via digital holography. Nature Communications 14(1):1716. https://doi.org/10.1038/s41467-023-37163-y — cited by 162
  18. Jaiswal A, Rastogi CK, Rani S, Singh GP, Saxena S, Shukla S. (2023). Two decades of two-photon lithography: Materials science perspective for additive manufacturing of 2D/3D nano-microstructures. iScience 26(4):106374. https://doi.org/10.1016/j.isci.2023.106374 — cited by 151
  19. Cantoni F, Maher D, Bosler E, Kühne S, Barbe L, Oberschmidt D, et al. (2023). Round-robin testing of commercial two-photon polymerization 3D printers. Additive Manufacturing 76:103761. https://doi.org/10.1016/j.addma.2023.103761 — cited by 32

Chapter 12 — Large-scale AM and construction​

  1. Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P. (2016). Wire + Arc Additive Manufacturing. Materials Science and Technology 32(7):641-647. https://doi.org/10.1179/1743284715y.0000000073 — cited by 1,770
  2. Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, et al. (2018). A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. Journal of Manufacturing Processes 35:127-139. https://doi.org/10.1016/j.jmapro.2018.08.001 — cited by 1,557
  3. Gardner L, Kyvelou P, Herbert G, Buchanan C. (2020). Testing and initial verification of the world's first metal 3D printed bridge. Journal of Constructional Steel Research 172:106233. https://doi.org/10.1016/j.jcsr.2020.106233 — cited by 334
  4. Shah A, Aliyev R, Zeidler H, Krinke S. (2023). A Review of the Recent Developments and Challenges in Wire Arc Additive Manufacturing (WAAM) Process. Journal of Manufacturing and Materials Processing 7(3):97. https://doi.org/10.3390/jmmp7030097 — cited by 190
  5. MX3D. Controlling distortion and residual stress in multi meter prints: an industrial engineering guide to thermal management (vendor guide, 2026). https://mx3d.com/controlling-distortion-and-residual-stress-in-multi-meter-prints
  6. Pignatelli F, Percoco G. (2022). An application- and market-oriented review on large format additive manufacturing, focusing on polymer pellet-based 3D printing. Progress in Additive Manufacturing 7(6):1363-1377. https://doi.org/10.1007/s40964-022-00309-3 — cited by 107
  7. Oak Ridge National Laboratory. Breaking barriers in polymer additive manufacturing. OSTI. https://www.osti.gov/servlets/purl/1185467
  8. Vicente CMS, Sardinha M, Reis L, Ribeiro A, Leite M. (2023). Large-format additive manufacturing of polymer extrusion-based deposition systems: review and applications. Progress in Additive Manufacturing 8(6):1257-1280. https://doi.org/10.1007/s40964-023-00397-9 — cited by 108
  9. Goh GD, Wong KK, Tan N, Seet HL, Nai MLS. (2024). Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design. Virtual and Physical Prototyping 19(1):e2336160. https://doi.org/10.1080/17452759.2024.2336160 — cited by 150
  10. Duty CE, Kunc V, Compton B, Post B, Erdman D, Smith R, et al. (2017). Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials. Rapid Prototyping Journal 23(1):181-189. https://doi.org/10.1108/rpj-12-2015-0183
  11. Gao X, Qi S, Kuang X, Su Y, Li J, Wang D. (2021). Fused filament fabrication of polymer materials: A review of interlayer bond. Additive Manufacturing 37:101658. https://doi.org/10.1016/j.addma.2020.101658
  12. Bos F, Wolfs R, Ahmed Z, Salet T. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual and Physical Prototyping 11(3):209-225. https://doi.org/10.1080/17452759.2016.1209867 — cited by 1,173
  13. Buswell R, Leal de Silva W, Jones S, Dirrenberger J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research 112:37-49. https://doi.org/10.1016/j.cemconres.2018.05.006 — cited by 1,574
  14. Raphael B, Senthilnathan S, Patel A, Bhat S. (2023). A review of concrete 3D printed structural members. Frontiers in Built Environment 8:1034020. https://doi.org/10.3389/fbuil.2022.1034020 — cited by 61
  15. Ding T, Xiao J, Mechtcherine V. (2023). Microstructure and mechanical properties of interlayer regions in extrusion-based 3D printed concrete: A critical review. Cement and Concrete Composites 141:105154. https://doi.org/10.1016/j.cemconcomp.2023.105154 — cited by 153
  16. Wolfs R, Bos F, Salet T. (2019). Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion. Cement and Concrete Research 119:132-140. https://doi.org/10.1016/j.cemconres.2019.02.017 — cited by 792
  17. Zhou Y, Althoey F, Alotaibi BS, Gamil Y, Iftikhar B. (2023). An overview of recent advancements in fibre-reinforced 3D printing concrete. Frontiers in Materials 10:1289340. https://doi.org/10.3389/fmats.2023.1289340 — cited by 26
  18. Nan B, Qiao Y, Leng J, Bai Y. (2025). Advancing Structural Reinforcement in 3D-Printed Concrete: Current Methods, Challenges, and Innovations. Materials 18(2):252. https://doi.org/10.3390/ma18020252 — cited by 38
  19. Bos F, Ahmed Z, Jutinov E, Salet T. (2017). Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete. Materials 10(11):1314. https://doi.org/10.3390/ma10111314
  20. Gebhard L, Mata-Falcón J, Anton A, Dillenburger B, Kaufmann W. (2021). Structural behaviour of 3D printed concrete beams with various reinforcement strategies. Engineering Structures 240:112380. https://doi.org/10.1016/j.engstruct.2021.112380
  21. ISO/ASTM 52939:2023 — Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements. ISO/ASTM. https://www.iso.org/standard/81177.html
  22. International Code Council. (2026). Advancing the Future of Construction: A New Standard for 3D Printed Wall Systems (ICC 1150, Standard for Automated Construction Technology for 3D Printing Walls; Building Safety Journal, 26 August 2026). https://www.iccsafe.org/building-safety-journal/bsj-technical/advancing-the-future-of-construction-a-new-standard-for-3d-printed-wall-systems/
  23. NIST. Additive Construction — The Path to Standardization II (workshop report). https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=958971

Chapter 13 — Qualification and certification: the central bottleneck​

  1. Seifi M, Salem A, Beuth J, Harrysson O, Lewandowski JJ. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM 68:747-764. https://doi.org/10.1007/s11837-015-1810-0 — cited by 570
  2. Chen Z, Han C, Gao M, Kandukuri SY, Zhou K. (2022). A review on qualification and certification for metal additive manufacturing. Virtual and Physical Prototyping 17(2):382-405. https://doi.org/10.1080/17452759.2021.2018938 — cited by 182
  3. Frazier WE. (2014). Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance 23(6):1917-1928. https://doi.org/10.1007/s11665-014-0958-z — cited by 5,640
  4. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, et al. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — cited by 2,269
  5. NIST. (created 2018, updated 2025). Additive Manufacturing Part Qualification (project page). National Institute of Standards and Technology. https://www.nist.gov/programs-projects/additive-manufacturing-part-qualification
  6. NASA. (2021). NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems (baseline approved 2021-04-21). https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  7. NASA. (2026). A Frank Discussion on Lessons Learned from Adopting NASA-STD-6030 (WAMS 2026 presentation). NASA Technical Reports Server. https://ntrs.nasa.gov/api/citations/20260004731/downloads/A%20Frank%20Discussion%20on%20NASA-STD-6030WAMS%202026%20V4.pdf
  8. FAA. (2023). Advisory Circular AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts (dated 2023-06-23). Federal Aviation Administration. https://www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentID/1041938
  9. EASA. (2025). Certification Memorandum CM-S-008 Issue 04 — Additive Manufacturing. European Union Aviation Safety Agency. https://www.easa.europa.eu/en/downloads/142437/en
  10. Aerospace Industries Association. (2020). Additive Manufacturing Best Practices: Recommended Guidance for Certification of AM Components. https://www.aia-aerospace.org/wp-content/uploads/AIA-Additive-Manufacturing-Best-Practices-Report-Final-Feb2020.pdf
  11. GE Aviation. (2015-04-14). The FAA Cleared the First 3D Printed Part to Fly in a Commercial Jet Engine from GE (vendor statement about its own T25 sensor housing). GE News. https://www.ge.com/news/reports/the-faa-cleared-the-first-3d-printed-part-to-fly-2
  12. GE Aerospace. Landmark Technologies (vendor statement: more than 10 additively made parts FAA-approved across GE90, LEAP, GEnx and GE9X; GE9X FAA certification in 2020). https://www.geaerospace.com/sustainability/innovation/landmark-technologies
  13. U.S. FDA. (2017). Technical Considerations for Additive Manufactured Medical Devices — Guidance for Industry and FDA Staff (final, 5 December 2017). https://www.fda.gov/regulatory-information/search-fda-guidance-documents/technical-considerations-additive-manufactured-medical-devices
  14. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  15. ISO/ASTM TS 52930:2021 — Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment. ISO/ASTM. https://www.iso.org/standard/79527.html
  16. Seifi M, Gorelik M, Waller J, Hrabe N, Shamsaei N, Daniewicz S, et al. (2017). Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification. JOM 69(3):439-455. https://doi.org/10.1007/s11837-017-2265-2 — cited by 381
  17. AFRL / NIAR. (2025). Operational Qualification Guidance Document (AFRL-2025-1254; supplements AMS 7003 and AMS 7032). https://www.wichita.edu/industry_and_defense/NIAR/Documents/Operational_Qualification_Guidance_Document_AFRL-2025-1254.pdf
  18. Argonne National Laboratory. (2023). ANL-AMMT-009 — ASME Code Qualification Plan for LPBF 316 SS. https://www.osti.gov/biblio/1997134
  19. Mani M, Lane BM, Donmez MA, Feng SC, Moylan SP. (2016). A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. International Journal of Production Research 55(5):1400-1418. https://doi.org/10.1080/00207543.2016.1223378 — cited by 206
  20. Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — cited by 1,821

Chapter 14 — Digital thread, data and the supply chain​

  1. Li S, Aggour KS, Lu Y, Coutts P, Harris B, Kitt A, et al. (2023). Enabling FAIR data in additive manufacturing to accelerate industrialization. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.500-1 — cited by 5
  2. Mies D, Marsden W, Warde S. (2016). Overview of Additive Manufacturing Informatics: “A Digital Thread”. Integrating Materials and Manufacturing Innovation 5(1):114-142. https://doi.org/10.1186/s40192-016-0050-7 — cited by 103
  3. ISO/IEC. (2025). ISO/IEC 25422:2025 — Information technology — 3D Manufacturing Format (3MF) specification suite (edition 1, June 2025). https://www.iso.org/standard/90283.html
  4. 3MF Consortium. (2025). 3MF: An ISO Standard for the Future of Additive Manufacturing (announcement of ISO/IEC 25422:2025; consortium statement, last updated 2025-07-31). https://3mf.io/announcement/2025/07/3mf-an-iso-standard-for-the-future-of-additive-manufacturing/
  5. Rodriguez E, Alvares A, Riaño C. (2025). STEP-NC in additive manufacturing: a comprehensive review, architecture, and data model proposal. The International Journal of Advanced Manufacturing Technology 137(11-12):5751-5787. https://doi.org/10.1007/s00170-025-15290-8 — cited by 22
  6. Li S, Feng S, Kuan A, Lu Y. (2024). Toward a Standard Data Architecture for Additive Manufacturing. JOM 76(4):1905-1912. https://doi.org/10.1007/s11837-023-06367-4 — cited by 8
  7. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  8. Khajavi, S. H., Partanen, J., Holmström, J. (2014). Additive manufacturing in the spare parts supply chain. Computers in Industry 65(1):50-63. https://doi.org/10.1016/j.compind.2013.07.008 — cited by 614
  9. Holmström J, Partanen J, Tuomi J, Walter M. (2010). Rapid manufacturing in the spare parts supply chain. Journal of Manufacturing Technology Management 21(6):687-697. https://doi.org/10.1108/17410381011063996 — cited by 393
  10. Liu P, Huang SH, Mokasdar A, Zhou H, Hou L. (2013). The impact of additive manufacturing in the aircraft spare parts supply chain: supply chain operation reference (scor) model based analysis. Production Planning & Control 25(13-14):1169-1181. https://doi.org/10.1080/09537287.2013.808835 — cited by 222
  11. Li Y, Jia G, Cheng Y, Hu Y. (2016). Additive manufacturing technology in spare parts supply chain: a comparative study. International Journal of Production Research 55(5):1498-1515. https://doi.org/10.1080/00207543.2016.1231433
  12. Naghshineh, B., Fragoso, R., Carvalho, H. (2023). Rethinking Additive Manufacturing for Spare Parts Supply Chain Management. Research-Technology Management 66(4):38-47. https://doi.org/10.1080/08956308.2023.2207970 — cited by 15
  13. Witherell P, Frazier W. (2024). Empowering small and medium-sized enterprises through effective additive manufacturing data management. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.100-59 — cited by 2
  14. Zeltmann SE, Gupta N, Tsoutsos NG, Maniatakos M, Rajendran J, Karri R. (2016). Manufacturing and Security Challenges in 3D Printing. JOM 68(7):1872-1881. https://doi.org/10.1007/s11837-016-1937-7
  15. Sturm LD, Williams CB, Camelio JA, White J, Parker R. (2017). Cyber-physical vulnerabilities in additive manufacturing systems: A case study attack on the .STL file with human subjects. Journal of Manufacturing Systems 44:154-164. https://doi.org/10.1016/j.jmsy.2017.05.007 — cited by 181
  16. Belikovetsky S, Yampolskiy M, Toh J, Gatlin J, Elovici Y. (2017). dr0wned – Cyber-Physical Attack with Additive Manufacturing. 11th USENIX Workshop on Offensive Technologies (WOOT 17). https://www.usenix.org/conference/woot17/workshop-program/presentation/belikovetsky
  17. Alkofahi H, Alawneh H, Skjellum A. (2024). MitM attacks on intellectual property and integrity of additive manufacturing systems: A security analysis. Computers & Security 140:103810. https://doi.org/10.1016/j.cose.2024.103810 — cited by 13
  18. Kumar M, Epiphaniou G, Maple C. (2025). Security of cyber-physical Additive Manufacturing supply chain: Survey, attack taxonomy and solutions. Computers & Security 157:104557. https://doi.org/10.1016/j.cose.2025.104557 — cited by 9
  19. Department of Defense Office of Inspector General. (2019). Audit of the DoD's Use of Additive Manufacturing for Sustainment Parts (report DODIG-2020-003, released 21 October 2019). https://media.defense.gov/2019/Oct/21/2002197659/-1/-1/1/DODIG-2020-003.pdf

Chapter 15 — Sustainability and life-cycle assessment​

  1. Ford S, Despeisse M. (2016). Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. Journal of Cleaner Production 137:1573-1587. https://doi.org/10.1016/j.jclepro.2016.04.150 — cited by 1,724
  2. Kellens K, Baumers M, Gutowski TG, Flanagan W, Lifset R, Duflou JR. (2017). Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications. Journal of Industrial Ecology 21(S1):S49–S68. https://doi.org/10.1111/jiec.12629 — cited by 300
  3. Faludi J, Baumers M, Maskery I, Hague R. (2017). Environmental Impacts of Selective Laser Melting: Do Printer, Powder, or Power Dominate? Journal of Industrial Ecology 21(S1):S144–S156. https://doi.org/10.1111/jiec.12528 — cited by 174
  4. Cozzolino E, Papa I, Astarita A. (2025). Gate-to-Gate Life Cycle Assessment of Printed AlSi10Mg Laser Powder Bed Fusion Jobs in Additive Manufacturing Factories. Journal of Materials Engineering and Performance 34(15):15306-15314. https://doi.org/10.1007/s11665-025-10867-6 — cited by 9
  5. Cozzolino E, Papa I, Astarita A. (2025). Energy Assessment of Powder Bed Fusion Additive Manufacturing Processes at Industrial Scale: Experiments and Simulations. Journal of Materials Engineering and Performance 34(15):15315-15323. https://doi.org/10.1007/s11665-025-11007-w — cited by 8
  6. Ehmsen S, Conrads J, Klar M, Aurich JC. (2025). Environmental impact of powder production for additive manufacturing: Carbon footprint and cumulative energy demand of gas atomization. Journal of Manufacturing Systems 82:13-25. https://doi.org/10.1016/j.jmsy.2025.05.004 — cited by 24
  7. Jung S, Kara LB, Nie Z, Simpson TW, Whitefoot KS. (2023). Is Additive Manufacturing an Environmentally and Economically Preferred Alternative for Mass Production?. Environmental Science & Technology 57(16):6373-6386. https://doi.org/10.1021/acs.est.2c04927 — cited by 161
  8. Faludi J, Bayley C, Bhogal S, Iribarne M. (2015). Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal 21(1):14-33. https://doi.org/10.1108/rpj-07-2013-0067 — cited by 393
  9. Huang R, Riddle M, Graziano D, Warren J, Das S, Nimbalkar S, Cresko J, Masanet E. (2016). Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. Journal of Cleaner Production 135:1559–1570. https://doi.org/10.1016/j.jclepro.2015.04.109 — cited by 740
  10. Golisano Institute for Sustainability, Rochester Institute of Technology. (2023, 17 February). Life Cycle Assessment (LCA) Report: Comparative LCA of a Low-Pressure Turbine (LPT) Bracket by Two Manufacturing Methods — Final Report. Prepared for AMGTA. https://amgta.org/wp-content/uploads/2023/03/AMGTA_LCA_Final_Report_20230301.pdf
  11. Ferreira BT, Monteiro J, Borille A, Leite M, Ribeiro I. (2025). Reuse powder impacts in additive manufacturing for aeronautical parts. The International Journal of Advanced Manufacturing Technology 141(3-4):2027-2062. https://doi.org/10.1007/s00170-025-16619-z — cited by 10
  12. Kokare S, Oliveira J, Godina R. (2023). Life cycle assessment of additive manufacturing processes: A review. Journal of Manufacturing Systems 68:536-559. https://doi.org/10.1016/j.jmsy.2023.05.007 — cited by 252
  13. Mohammadkamal H, Zinatlou Ajabshir S, Mostafaei A. (2025). Additive Manufacturing at the Crossroads: Costs, Sustainability, and Global Adoption. Journal of Manufacturing and Materials Processing 10(1):5. https://doi.org/10.3390/jmmp10010005 — cited by 14

Chapter 16 — Cost, throughput and scaling to production​

  1. Hopkinson N, Dicknes P. (2003). Analysis of rapid manufacturing—using layer manufacturing processes for production. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(1):31-39. https://doi.org/10.1243/095440603762554596 — cited by 287
  2. Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — cited by 593
  3. Laureijs RE, Roca JB, Narra SP, Montgomery C, Beuth JL, Fuchs ERH. (2017). Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes. Journal of Manufacturing Science and Engineering 139(8):081010. https://doi.org/10.1115/1.4035420 — cited by 136
  4. Thomas, D. S., Gilbert, S. W. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.1176.pdf
  5. Wohlers Associates / ASTM International. (2026-02-17). New Wohlers Report 2026 Values Additive Manufacturing Market at $24.2B. https://wohlersassociates.com/press-releases/new-wohlers-report-2026-values-additive-manufacturing-market-at-24-2b/
  6. AMPOWER. (2025). Metal Additive Manufacturing market 2025. AMPOWER Report on Additive Manufacturing. https://additive-manufacturing-report.com/metal-additive-manufacturing-market-2025/
  7. Karaş, B., Shokrani, A. (2025). Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation. npj Advanced Manufacturing 2:24. https://doi.org/10.1038/s44334-025-00036-x — cited by 3
  8. Ruffo M, Tuck C, Hague R. (2006). Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220(9):1417-1427. https://doi.org/10.1243/09544054jem517
  9. Parenti, P., Puccio, D., Semeraro, Q., Colosimo, B. M. (2024). A techno-economic approach for decision-making in metal additive manufacturing: metal extrusion versus single and multiple laser powder bed fusion. Progress in Additive Manufacturing 9:185-210. https://doi.org/10.1007/s40964-023-00442-7 — cited by 38
  10. Rothfelder R, Nahr F, Chechik L, Bartels D, Schmidt M. (2023). A Brief History of the Progress of Laser Powder Bed Fusion of Metals in Europe. Journal of Manufacturing Science and Engineering 145(10):100801. https://doi.org/10.1115/1.4062788 — cited by 8
  11. Wang, P., Robertson, G., Gibson, B. T., Fancher, C. M., Reynolds, J., Borish, M., Cruz, J. R., Chesser, P., Stump, B., Jackson, A., MacDonald, E. (2024). Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing. 3D Printing and Additive Manufacturing 11(1):231-241. https://doi.org/10.1089/3dp.2022.0288 — cited by 20
  12. GE Aerospace. (2018-10-04). Manufacturing Milestone: 30,000 Additive Fuel Nozzles. GE Aerospace News. https://www.geaerospace.com/news/articles/manufacturing/manufacturing-milestone-30000-additive-fuel-nozzles
  13. Align Technology. (2026). Form 10-K for the fiscal year ended 31 December 2025. U.S. Securities and Exchange Commission (company filing; statements about Align's own process and products). https://www.sec.gov/Archives/edgar/data/1097149/000109714926000026/algn-20251231x10kasfiled.pdf
  14. Align Technology. (2024-01). Align Technology Completes Acquisition of Cubicure, a Pioneer of Direct 3D Printing Solutions for Polymer Additive Manufacturing. https://investor.aligntech.com/news-releases/news-release-details/align-technology-completes-acquisition-cubicure-pioneer-direct
  15. Nano Dimension. (2025-07-28). Nano Dimension Statement Regarding Desktop Metal Bankruptcy and Strategic Decision Not to Acquire Assets (parent-company statement about its subsidiary). https://investors.nano-di.com/press-releases/news-details/2025/Nano-Dimension-Statement-Regarding-Desktop-Metal-Bankruptcy-and-Strategic-Decision-Not-to-Acquire-Assets/default.aspx
  16. Weller C, Kleer R, Piller FT. (2015). Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited. International Journal of Production Economics 164:43-56. https://doi.org/10.1016/j.ijpe.2015.02.020 — cited by 699

Chapter 17 — Lab 4 — Simulate a melt pool with open-source codes​

  1. NIST. (2018). AMB2018-02 Description (AM Bench 2018, single laser tracks on bare IN625 plates). National Institute of Standards and Technology. https://www.nist.gov/ambench/amb2018-02-description
  2. Levine L, Lane B, Heigel J, Migler K, Stoudt M, Phan T, et al. (2020). Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 9(1):1-15. https://doi.org/10.1007/s40192-019-00164-1 — cited by 77
  3. Rosenthal D. (1946). The Theory of Moving Sources of Heat and Its Application to Metal Treatments. Journal of Fluids Engineering 68(8):849-865. https://doi.org/10.1115/1.4018624 — cited by 357
  4. ORNL. AdditiveFOAM, release 2.0.0 (GPL-3.0-or-later; documentation for 2.0 targets OpenFOAM-14). Oak Ridge National Laboratory. https://github.com/ORNL/AdditiveFOAM/releases/tag/2.0.0 and https://ornl.github.io/AdditiveFOAM/
  5. LLNL. ExaCA, release 2.1.0 (MIT license). Lawrence Livermore National Laboratory. https://github.com/LLNL/ExaCA/releases/tag/2.1.0
  6. Promoppatum P, Yao SC, Pistorius PC, Rollett AD. (2017). A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion. Engineering 3(5):685-694. https://doi.org/10.1016/j.eng.2017.05.023 — cited by 273
  7. OpenFOAM Foundation. Download OpenFOAM 14 (Ubuntu packages). The OpenFOAM Foundation. https://openfoam.org/download/14-ubuntu/
  8. Rolchigo M, Reeve ST, Stump B, Knapp GL, Coleman J, Plotkowski A, et al. (2022). ExaCA: A performance portable exascale cellular automata application for alloy solidification modeling. Computational Materials Science 214:111692. https://doi.org/10.1016/j.commatsci.2022.111692 — cited by 54
  9. Lane B, Heigel J, Ricker R, Zhirnov I, Khromschenko V, Weaver J, et al. (2020). Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates. Integrating Materials and Manufacturing Innovation 9(1):16-30. https://doi.org/10.1007/s40192-020-00169-1 — cited by 108
  10. NIST. (2018). CHAL-AMB2018-02-AMMT-MP: melt pool width and depth (AM Bench 2018). National Institute of Standards and Technology. https://www.nist.gov/ambench/chal-amb2018-02-mp-xsection
  11. Knapp G, Coleman J, Rolchigo M, Stoyanov M, Plotkowski A. (2023). Calibrating uncertain parameters in melt pool simulations of additive manufacturing. Computational Materials Science 218:111904. https://doi.org/10.1016/j.commatsci.2022.111904 — cited by 39
  12. Trapp J, Rubenchik AM, Guss G, Matthews MJ. (2017). In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing. Applied Materials Today 9:341-349. https://doi.org/10.1016/j.apmt.2017.08.006 — cited by 501
  13. Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, et al. (2019). Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging. Science 363(6429):849-852. https://doi.org/10.1126/science.aav4687 — cited by 1,064
  14. Khairallah SA, Anderson AT, Rubenchik A, King WE. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — cited by 2,757
  15. Coleman J, Kincaid K, Knapp GL, Stump B, Reeve ST, Rolchigo M, et al. (2025). AdditiveFOAM: A Continuum Multiphysics Code for Additive Manufacturing. Journal of Open Source Software 10(109):7770. https://doi.org/10.21105/joss.07770 — cited by 6

Chapter 18 — Lab 5 — Open datasets and a leakage-safe ML baseline​

  1. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — cited by 1,649
  2. Roberts DR, Bahn V, Ciuti S, Boyce MS, Elith J, Guillera‐Arroita G, et al. (2017). Cross‐validation strategies for data with temporal, spatial, hierarchical, or phylogenetic structure. Ecography 40(8):913-929. https://doi.org/10.1111/ecog.02881 — cited by 4,096
  3. scikit-learn developers. Cross-validation: evaluating estimator performance (version 1.9, includes LeaveOneGroupOut). scikit-learn 1.9 documentation. https://scikit-learn.org/1.9/modules/cross_validation.html
  4. Weaver J, Williams M, Ricker RE, Deisenroth D, Mekhontsev S, Young S, Lane B, Levine L. (2022). AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03), Version 1.0.0. National Institute of Standards and Technology (NIST Public Data Repository). https://doi.org/10.18434/mds2-2718
  5. NIST. NIST licensing and data-citation statements (open data licence). National Institute of Standards and Technology. https://www.nist.gov/open/license
  6. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — cited by 11
  7. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  8. scikit-learn developers. Gaussian Processes (version 1.9). scikit-learn 1.9 documentation. https://scikit-learn.org/1.9/modules/gaussian_process.html
  9. King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW, Hahn DE, et al. (2014). Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. Journal of Materials Processing Technology 214(12):2915-2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005 — cited by 1,620

Chapter 19 — Research starter kit: from reading to first contribution​

  1. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — cited by 1,649
  2. Crossref. REST API documentation. Crossref. https://www.crossref.org/documentation/retrieve-metadata/rest-api/
  3. OpenAlex. OpenAlex technical documentation. OurResearch. https://docs.openalex.org/
  4. Allen Institute for AI. Semantic Scholar Academic Graph API. Semantic Scholar. https://api.semanticscholar.org/api-docs/
  5. DebRoy T, Wei H, Zuback J, Mukherjee T, Elmer J, Milewski J, et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — cited by 8,836
  6. Huang Y, Fleming TG, Clark SJ, Marussi S, Fezzaa K, Thiyagalingam J, et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13(1):1170. https://doi.org/10.1038/s41467-022-28694-x — cited by 432
  7. Waltman L. (2016). A review of the literature on citation impact indicators. Journal of Informetrics 10(2):365-391. https://doi.org/10.1016/j.joi.2016.02.007 — cited by 1,168
  8. Aksnes DW. (2003). A macro study of self-citation. Scientometrics 56(2):235-246. https://doi.org/10.1023/a:1021919228368 — cited by 270
  9. Roberts DR, Bahn V, Ciuti S, Boyce MS, Elith J, Guillera‐Arroita G, et al. (2017). Cross‐validation strategies for data with temporal, spatial, hierarchical, or phylogenetic structure. Ecography 40(8):913-929. https://doi.org/10.1111/ecog.02881 — cited by 4,096
  10. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  11. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — cited by 11
  12. NIST. Additive Manufacturing Benchmark Test Series (AM Bench). National Institute of Standards and Technology. https://www.nist.gov/ambench
  13. ASTM International. Committee F42 on Additive Manufacturing Technologies. ASTM International. https://www.astm.org/membership-participation/technical-committees/committee-f42
  14. ISO. ISO/TC 261 — Additive manufacturing. International Organization for Standardization. https://www.iso.org/committee/629086.html
  15. Solid Freeform Fabrication Symposium. Annual International Solid Freeform Fabrication Symposium (home page). https://www.sffsymposium.org/
  16. ASTM International Additive Manufacturing Center of Excellence. ASTM International Conference on Advanced Manufacturing 2025. https://amcoe.org/event/icam2025/
  17. Materials Data Facility. Publish, discover and access materials data. https://www.materialsdatafacility.org/
  18. NIST. Direct AM Bench Data Links and Referencing Guidance. National Institute of Standards and Technology. https://www.nist.gov/ambench/direct-am-bench-data-links-and-referencing-guidance
  19. Wilkinson MD, Dumontier M, Aalbersberg IJ, Appleton G, Axton M, Baak A, et al. (2016). The FAIR Guiding Principles for scientific data management and stewardship. Scientific Data 3(1):160018. https://doi.org/10.1038/sdata.2016.18 — cited by 16,237

Chapter 20 — The honest verdict: what industry still cannot do​

  1. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — cited by 15
  2. Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — cited by 20
  3. Skylar-Scott MA, Mueller J, Visser CW, Lewis JA. (2019). Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575(7782):330-335. https://doi.org/10.1038/s41586-019-1736-8 — cited by 1,032
  4. Gardner L, Kyvelou P, Herbert G, Buchanan C. (2020). Testing and initial verification of the world's first metal 3D printed bridge. Journal of Constructional Steel Research 172:106233. https://doi.org/10.1016/j.jcsr.2020.106233 — cited by 334
  5. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  6. Lane B, Heigel J, Ricker R, Zhirnov I, Khromschenko V, Weaver J, et al. (2020). Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates. Integrating Materials and Manufacturing Innovation 9(1):16-30. https://doi.org/10.1007/s40192-020-00169-1 — cited by 108
  7. Knapp G, Coleman J, Rolchigo M, Stoyanov M, Plotkowski A. (2023). Calibrating uncertain parameters in melt pool simulations of additive manufacturing. Computational Materials Science 218:111904. https://doi.org/10.1016/j.commatsci.2022.111904 — cited by 39
  8. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — cited by 11
  9. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — cited by 1,649
  10. Wang P, Robertson G, Gibson BT, Fancher CM, Reynolds J, Borish M, et al. (2024). Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing. 3D Printing and Additive Manufacturing 11(1):231-241. https://doi.org/10.1089/3dp.2022.0288 — cited by 20
  11. Snow Z, Scime L, Ziabari A, Fisher B, Paquit V. (2023). Scalable in situ non-destructive evaluation of additively manufactured components using process monitoring, sensor fusion, and machine learning. Additive Manufacturing 78:103817. https://doi.org/10.1016/j.addma.2023.103817 — cited by 25
  12. NIST. (created 2018, updated 2025). Additive Manufacturing Part Qualification (project page). National Institute of Standards and Technology. https://www.nist.gov/programs-projects/additive-manufacturing-part-qualification
  13. Li S, Aggour KS, Lu Y, Coutts P, Harris B, Kitt A, et al. (2023). Enabling FAIR data in additive manufacturing to accelerate industrialization. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.500-1 — cited by 5
  14. Witherell P, Frazier W. (2024). Empowering small and medium-sized enterprises through effective additive manufacturing data management. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.100-59 — cited by 2
  15. Ren Z, Gao L, Clark SJ, Fezzaa K, Shevchenko P, Choi A, et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379(6627):89-94. https://doi.org/10.1126/science.add4667 — cited by 337
  16. Yeung H. (2025). Toward real-time feedback control for powder bed fusion additive manufacturing. Additive Manufacturing 114:105041. https://doi.org/10.1016/j.addma.2025.105041 — cited by 3
  17. Fox J, Kim F, Lane B, Praniewicz M, Tondare V, Weaver J, et al. (2024). In-process monitoring and non-destructive evaluation for metal additive manufacturing processes. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ir.8538 — cited by 5
  18. Sanaei N, Fatemi A. (2021). Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. Progress in Materials Science 117:100724. https://doi.org/10.1016/j.pmatsci.2020.100724 — cited by 1,006
  19. Karaş B, Shokrani A. (2025). Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation. npj Advanced Manufacturing 2(1):24. https://doi.org/10.1038/s44334-025-00036-x — cited by 3
  20. GE Aerospace. (2018-10-04). Manufacturing Milestone: 30,000 Additive Fuel Nozzles. GE Aerospace News. https://www.geaerospace.com/news/articles/manufacturing/manufacturing-milestone-30000-additive-fuel-nozzles
  21. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. (2017). 3D printing of high-strength aluminium alloys. Nature 549(7672):365-369. https://doi.org/10.1038/nature23894 — cited by 2,956
  22. Smith TM, Kantzos CA, Zarkevich NA, Harder BJ, Heczko M, Gradl PR, et al. (2023). A 3D printable alloy designed for extreme environments. Nature 617(7961):513-518. https://doi.org/10.1038/s41586-023-05893-0 — cited by 280
  23. Raphael B, Senthilnathan S, Patel A, Bhat S. (2023). A review of concrete 3D printed structural members. Frontiers in Built Environment 8:1034020. https://doi.org/10.3389/fbuil.2022.1034020 — cited by 61
  24. ISO/ASTM 52939:2023 — Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements. ISO/ASTM. https://www.iso.org/standard/81177.html
  25. International Code Council. (2026). Advancing the Future of Construction: A New Standard for 3D Printed Wall Systems (ICC 1150, Standard for Automated Construction Technology for 3D Printing Walls; Building Safety Journal, 26 August 2026). https://www.iccsafe.org/building-safety-journal/bsj-technical/advancing-the-future-of-construction-a-new-standard-for-3d-printed-wall-systems/
  26. Kellens K, Baumers M, Gutowski TG, Flanagan W, Lifset R, Duflou JR. (2017). Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications. Journal of Industrial Ecology 21(S1). https://doi.org/10.1111/jiec.12629 — cited by 300
  27. Faludi J, Baumers M, Maskery I, Hague R. (2016). Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?. Journal of Industrial Ecology 21(S1). https://doi.org/10.1111/jiec.12528 — cited by 174
  28. Golisano Institute for Sustainability, Rochester Institute of Technology. (2023, 17 February). Life Cycle Assessment (LCA) Report: Comparative LCA of a Low-Pressure Turbine (LPT) Bracket by Two Manufacturing Methods — Final Report. Prepared for AMGTA. https://amgta.org/wp-content/uploads/2023/03/AMGTA_LCA_Final_Report_20230301.pdf
  29. Murphy SV, De Coppi P, Atala A. (2019). Opportunities and challenges of translational 3D bioprinting. Nature Biomedical Engineering 4(4):370-380. https://doi.org/10.1038/s41551-019-0471-7 — cited by 530
  30. Align Technology. (2026). Form 10-K for the fiscal year ended 31 December 2025. U.S. Securities and Exchange Commission (company filing; statements about Align's own process and products). https://www.sec.gov/Archives/edgar/data/1097149/000109714926000026/algn-20251231x10kasfiled.pdf
  31. NASA. (2021). NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems (baseline approved 2021-04-21). https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  32. FAA. (2023). Advisory Circular AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts (dated 2023-06-23). Federal Aviation Administration. https://www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentID/1041938