본문으로 건너뛰기

참고문헌

📍 현재 위치: 연구 최전선과 산업 난제의 근거 자료를 한곳에 모았습니다.

이 책의 모든 본문 인용(대괄호 번호, 예: [1])은 장별로 묶인 이 페이지로 연결됩니다. 번호는 장마다 1부터 다시 시작하며 해당 장의 [N] 표시와 일치합니다. 항목은 모든 언어판에서 동일합니다. '피인용' 횟수는 Crossref 기준(빌드 시점)이며 DOI가 있는 항목에만 표시됩니다. 표준, 공식 문서, 소스 저장소에는 횟수가 없습니다.

장 1 — 머리말 — 연구 최전선과 산업 난제​

  1. DebRoy T, Wei H, Zuback J, Mukherjee T, Elmer J, Milewski J, et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — 피인용 8,836회
  2. NASA. Technology Readiness Levels. National Aeronautics and Space Administration. https://www.nasa.gov/directorates/somd/space-communications-navigation-program/technology-readiness-levels/
  3. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회

장 2 — 용융풀 물리: 키홀, 볼링, 스패터​

  1. Hooper P. A. (2018). Melt pool temperature and cooling rates in laser powder bed fusion. Additive Manufacturing 22:548-559. https://doi.org/10.1016/j.addma.2018.05.032 — 피인용 283회
  2. King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, et al. (2015). Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Reviews 2(4):041304. https://doi.org/10.1063/1.4937809 — 피인용 1,214회
  3. Wang J, Zhu R, Liu Y, Zhang L. (2023). Understanding melt pool characteristics in laser powder bed fusion: An overview of single- and multi-track melt pools for process optimization. Advanced Powder Materials 2(4):100137. https://doi.org/10.1016/j.apmate.2023.100137 — 피인용 344회
  4. Aucott L., Dong H., Mirihanage W., Atwood R., Kidess A., Gao S., et al. (2018). Revealing internal flow behaviour in arc welding and additive manufacturing of metals. Nature Communications 9:5414. https://doi.org/10.1038/s41467-018-07900-9 — 피인용 246회
  5. Khairallah S. A., Anderson A. T., Rubenchik A., King W. E. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — 피인용 2,757회
  6. Matthews M. J., Guss G., Khairallah S. A., Rubenchik A. M., Depond P. J., King W. E. (2016). Denudation of metal powder layers in laser powder bed fusion processes. Acta Materialia 114:33-42. https://doi.org/10.1016/j.actamat.2016.05.017 — 피인용 782회
  7. King W. E., Barth H. D., Castillo V. M., Gallegos G. F., Gibbs J. W., Hahn D. E., et al. (2014). Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. Journal of Materials Processing Technology 214:2915-2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005 — 피인용 1,620회
  8. Zhao C., Fezzaa K., Cunningham R. W., Wen H., De Carlo F., Chen L., et al. (2017). Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Scientific Reports 7:3602. https://doi.org/10.1038/s41598-017-03761-2 — 피인용 570회
  9. Cunningham R., Zhao C., Parab N., Kantzos C., Pauza J., Fezzaa K., et al. (2019). Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging. Science 363:849-852. https://doi.org/10.1126/science.aav4687 — 피인용 1,064회
  10. Huang Y., Fleming T. G., Clark S. J., Marussi S., Fezzaa K., Thiyagalingam J., et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13:1170. https://doi.org/10.1038/s41467-022-28694-x — 피인용 432회
  11. Martin A. A., Calta N. P., Khairallah S. A., Wang J., Depond P. J., Fong A. Y., et al. (2019). Dynamics of pore formation during laser powder bed fusion additive manufacturing. Nature Communications 10:1987. https://doi.org/10.1038/s41467-019-10009-2 — 피인용 686회
  12. Zhao C., Parab N. D., Li X., Fezzaa K., Tan W., Rollett A. D., et al. (2020). Critical instability at moving keyhole tip generates porosity in laser melting. Science 370:1080-1086. https://doi.org/10.1126/science.abd1587 — 피인용 685회
  13. Gan Z., Kafka O. L., Parab N., Zhao C., Fang L., Heinonen O., et al. (2021). Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nature Communications 12:2379. https://doi.org/10.1038/s41467-021-22704-0 — 피인용 253회
  14. Khairallah S. A., Martin A. A., Lee J. R. I., Guss G., Calta N. P., Hammons J. A., et al. (2020). Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing. Science 368:660-665. https://doi.org/10.1126/science.aay7830 — 피인용 500회
  15. Ren Z., Gao L., Clark S. J., Fezzaa K., Shevchenko P., Choi A., et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379:89-94. https://doi.org/10.1126/science.add4667 — 피인용 337회
  16. Ren Z., Shao J., Liu H., Clark S. J., Gao L., Balderson L., et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3:045001. https://doi.org/10.1088/2752-5724/ad89e2 — 피인용 17회

장 3 — 결함, 잔류응력, 변형​

  1. Snow Z., Nassar A. R., Reutzel E. W. (2020). Invited Review Article: Review of the formation and impact of flaws in powder bed fusion additive manufacturing. Additive Manufacturing 36:101457. https://doi.org/10.1016/j.addma.2020.101457 — 피인용 108회
  2. Tang M., Pistorius P. C., Beuth J. L. (2017). Prediction of lack-of-fusion porosity for powder bed fusion. Additive Manufacturing 14:39-48. https://doi.org/10.1016/j.addma.2016.12.001 — 피인용 289회
  3. Gordon J. V., Narra S. P., Cunningham R. W., Liu H., Chen H., Suter R. M., et al. (2020). Defect structure process maps for laser powder bed fusion additive manufacturing. Additive Manufacturing 36:101552. https://doi.org/10.1016/j.addma.2020.101552 — 피인용 155회
  4. Hojjatzadeh S. M. H., Parab N. D., Yan W., Guo Q., Xiong L., Zhao C., et al. (2019). Pore elimination mechanisms during 3D printing of metals. Nature Communications 10:3088. https://doi.org/10.1038/s41467-019-10973-9 — 피인용 305회
  5. Zhang K., Chen Y., Marussi S., Fan X., Fitzpatrick M., Bhagavath S., et al. (2024). Pore evolution mechanisms during directed energy deposition additive manufacturing. Nature Communications 15:1715. https://doi.org/10.1038/s41467-024-45913-9 — 피인용 187회
  6. Kou S. (2015). A criterion for cracking during solidification. Acta Materialia 88:366-374. https://doi.org/10.1016/j.actamat.2015.01.034 — 피인용 931회
  7. Martin J. H., Yahata B. D., Hundley J. M., Mayer J. A., Schaedler T. A., Pollock T. M. (2017). 3D printing of high-strength aluminium alloys. Nature 549:365-369. https://doi.org/10.1038/nature23894 — 피인용 2,956회
  8. Chauvet E., Kontis P., Jägle E. A., Gault B., Raabe D., Tassin C., et al. (2018). Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting. Acta Materialia 142:82-94. https://doi.org/10.1016/j.actamat.2017.09.047 — 피인용 617회
  9. Liu Z., Zhou Q., Liang X., Wang X., Li G., Vanmeensel K., et al. (2024). Alloy design for laser powder bed fusion additive manufacturing: a critical review. International Journal of Extreme Manufacturing 6:022002. https://doi.org/10.1088/2631-7990/ad1657 — 피인용 121회
  10. Sun Z., Ma Y., Ponge D., Zaefferer S., Jägle E. A., Gault B., et al. (2022). Thermodynamics-guided alloy and process design for additive manufacturing. Nature Communications 13(1):4361. https://doi.org/10.1038/s41467-022-31969-y — 피인용 131회
  11. Mercelis P., Kruth J. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal 12:254-265. https://doi.org/10.1108/13552540610707013 — 피인용 1,908회
  12. Kruth J. P., Deckers J., Yasa E., Wauthlé R. (2012). Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:980-991. https://doi.org/10.1177/0954405412437085 — 피인용 489회
  13. Bartlett J. L., Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — 피인용 259회
  14. Li C., Liu Z., Fang X., Guo Y. (2018). Residual Stress in Metal Additive Manufacturing. Procedia CIRP 71:348-353. https://doi.org/10.1016/j.procir.2018.05.039 — 피인용 690회
  15. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회

장 4 — 미세조직, 이방성, 공정-조직-물성 관계​

  1. Kok Y., Tan X., Wang P., Nai M., Loh N., Liu E., et al. (2018). Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design 139:565-586. https://doi.org/10.1016/j.matdes.2017.11.021 — 피인용 1,443회
  2. DebRoy T., Wei H., Zuback J., Mukherjee T., Elmer J., Milewski J., et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — 피인용 8,836회
  3. Wang Y. M., Voisin T., McKeown J. T., Ye J., Calta N. P., Li Z., et al. (2017). Additively manufactured hierarchical stainless steels with high strength and ductility. Nature Materials 17:63-71. https://doi.org/10.1038/nmat5021 — 피인용 2,602회
  4. Voisin T., Forien J. B., Perron A., Aubry S., Bertin N., Samanta A., et al. (2021). New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion. Acta Materialia 203:116476. https://doi.org/10.1016/j.actamat.2020.11.018 — 피인용 631회
  5. Ren N., Li J., Zhang R., Panwisawas C., Xia M., Dong H., et al. (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nature Communications 14(1):7990. https://doi.org/10.1038/s41467-023-43563-x — 피인용 221회
  6. Dehoff R. R., Kirka M. M., Sames W. J., Bilheux H., Tremsin A. S., Lowe L. E., et al. (2015). Site specific control of crystallographic grain orientation through electron beam additive manufacturing. Materials Science and Technology 31:931-938. https://doi.org/10.1179/1743284714Y.0000000734 — 피인용 536회
  7. Martin J. H., Yahata B. D., Hundley J. M., Mayer J. A., Schaedler T. A., Pollock T. M. (2017). 3D printing of high-strength aluminium alloys. Nature 549:365-369. https://doi.org/10.1038/nature23894 — 피인용 2,956회
  8. Brooke R., Zhang D., Qiu D., Gibson M. A., Easton M. (2025). Compositional criteria to predict columnar to equiaxed transitions in metal additive manufacturing. Nature Communications 16(1):5710. https://doi.org/10.1038/s41467-025-60162-0 — 피인용 70회
  9. Todaro C. J., Easton M. A., Qiu D., Zhang D., Bermingham M. J., Lui E. W., et al. (2020). Grain structure control during metal 3D printing by high-intensity ultrasound. Nature Communications 11:142. https://doi.org/10.1038/s41467-019-13874-z — 피인용 846회
  10. Kürnsteiner P., Wilms M. B., Weisheit A., Gault B., Jägle E. A., Raabe D. (2020). High-strength Damascus steel by additive manufacturing. Nature 582:515-519. https://doi.org/10.1038/s41586-020-2409-3 — 피인용 517회
  11. Lewandowski J. J., Seifi M. (2016). Metal Additive Manufacturing: A Review of Mechanical Properties. Annual Review of Materials Research 46:151-186. https://doi.org/10.1146/annurev-matsci-070115-032024 — 피인용 1,626회
  12. Yadollahi A., Shamsaei N. (2017). Additive manufacturing of fatigue resistant materials: Challenges and opportunities. International Journal of Fatigue 98:14-31. https://doi.org/10.1016/j.ijfatigue.2017.01.001 — 피인용 988회
  13. Sanaei N., Fatemi A. (2021). Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. Progress in Materials Science 117:100724. https://doi.org/10.1016/j.pmatsci.2020.100724 — 피인용 1,006회
  14. Ye C., Zhang C., Zhao J., Dong Y. (2021). Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review. Journal of Materials Engineering and Performance 30(9):6407-6425. https://doi.org/10.1007/s11665-021-06021-7 — 피인용 250회
  15. Hu Z., Yan W. (2024). Data-driven modeling of process-structure-property relationships in metal additive manufacturing. npj Advanced Manufacturing 1:3. https://doi.org/10.1038/s44334-024-00003-y — 피인용 56회
  16. Moser N., Benzing J., Kafka O. L., Weaver J., Derimow N., Rentz R., et al. (2024). AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions. Integrating Materials and Manufacturing Innovation 13:155-174. https://doi.org/10.1007/s40192-023-00333-3 — 피인용 7회

장 5 — 시뮬레이션과 통합 계산 재료 공학(ICME)​

  1. Francois M., Sun A., King W., Henson N., Tourret D., Bronkhorst C., et al. (2017). Modeling of additive manufacturing processes for metals: Challenges and opportunities. Current Opinion in Solid State and Materials Science 21:198-206. https://doi.org/10.1016/j.cossms.2016.12.001 — 피인용 431회
  2. King WE, Anderson AT, Ferencz RM, Hodge NE, Kamath C, Khairallah SA, et al. (2015). Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Reviews 2(4):041304. https://doi.org/10.1063/1.4937809 — 피인용 1,214회
  3. Khairallah S. A., Anderson A. T., Rubenchik A., King W. E. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — 피인용 2,757회
  4. Gan Z., Kafka O. L., Parab N., Zhao C., Fang L., Heinonen O., et al. (2021). Universal scaling laws of keyhole stability and porosity in 3D printing of metals. Nature Communications 12:2379. https://doi.org/10.1038/s41467-021-22704-0 — 피인용 253회
  5. Panwisawas C., Qiu C., Anderson M. J., Sovani Y., Turner R. P., Attallah M. M., et al. (2017). Mesoscale modelling of selective laser melting: Thermal fluid dynamics and microstructural evolution. Computational Materials Science 126:479-490. https://doi.org/10.1016/j.commatsci.2016.10.011 — 피인용 316회
  6. Rodgers T. M., Madison J. D., Tikare V. (2017). Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo. Computational Materials Science 135:78-89. https://doi.org/10.1016/j.commatsci.2017.03.053 — 피인용 345회
  7. Keller T., Lindwall G., Ghosh S., Ma L., Lane B. M., Zhang F., et al. (2017). Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys. Acta Materialia 139:244-253. https://doi.org/10.1016/j.actamat.2017.05.003 — 피인용 424회
  8. Bayat M, Dong W, Thorborg J, To AC, Hattel JH. (2021). A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies. Additive Manufacturing 47:102278. https://doi.org/10.1016/j.addma.2021.102278
  9. Liang X., Chen Q., Cheng L., Hayduke D., To A. C. (2019). Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components. Computational Mechanics 64:1719-1733. https://doi.org/10.1007/s00466-019-01748-6 — 피인용 141회
  10. Mukherjee T, Wei H, De A, DebRoy T. (2018). Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion. Computational Materials Science 150:304-313. https://doi.org/10.1016/j.commatsci.2018.04.022 — 피인용 207회
  11. Yang M, Wang L, Yan W. (2021). Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening. npj Computational Materials 7(1):56. https://doi.org/10.1038/s41524-021-00524-6 — 피인용 251회
  12. Ren N, Li J, Zhang R, Panwisawas C, Xia M, Dong H, et al. (2023). Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing. Nature Communications 14(1):7990. https://doi.org/10.1038/s41467-023-43563-x — 피인용 221회
  13. Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — 피인용 259회
  14. Smith J., Xiong W., Yan W., Lin S., Cheng P., Kafka O. L., et al. (2016). Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support. Computational Mechanics 57:583-610. https://doi.org/10.1007/s00466-015-1240-4 — 피인용 248회
  15. Yan W., Lin S., Kafka O. L., Lian Y., Yu C., Liu Z., et al. (2018). Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing. Computational Mechanics 61:521-541. https://doi.org/10.1007/s00466-018-1539-z — 피인용 225회
  16. Levine L., Lane B., Heigel J., Migler K., Stoudt M., Phan T., et al. (2020). Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 9:1-15. https://doi.org/10.1007/s40192-019-00164-1 — 피인용 77회
  17. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회
  18. Moser N., Benzing J., Kafka O. L., Weaver J., Derimow N., Rentz R., et al. (2024). AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions. Integrating Materials and Manufacturing Innovation 13:155-174. https://doi.org/10.1007/s40192-023-00333-3 — 피인용 7회

장 6 — 적층제조를 위한 머신러닝​

  1. Meng L., McWilliams B., Jarosinski W., Park H. Y., Jung Y. G., Lee J., et al. (2020). Machine Learning in Additive Manufacturing: A Review. JOM 72:2363-2377. https://doi.org/10.1007/s11837-020-04155-y — 피인용 433회
  2. Wang C., Tan X., Tor S., Lim C. (2020). Machine learning in additive manufacturing: State-of-the-art and perspectives. Additive Manufacturing 36:101538. https://doi.org/10.1016/j.addma.2020.101538 — 피인용 399회
  3. Qin J, Hu F, Liu Y, Witherell P, Wang CC, Rosen DW, et al. (2022). Research and application of machine learning for additive manufacturing. Additive Manufacturing 52:102691. https://doi.org/10.1016/j.addma.2022.102691 — 피인용 221회
  4. Guo S, Agarwal M, Cooper C, Tian Q, Gao RX, Guo W, et al. (2022). Machine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm. Journal of Manufacturing Systems 62:145-163. https://doi.org/10.1016/j.jmsy.2021.11.003 — 피인용 326회
  5. Faegh M, Ghungrad S, Oliveira JP, Rao P, Haghighi A. (2025). A review on physics-informed machine learning for process-structure-property modeling in additive manufacturing. Journal of Manufacturing Processes 133:524-555. https://doi.org/10.1016/j.jmapro.2024.11.066 — 피인용 124회
  6. Samadiani N., Barnard A. S., Gunasegaram D., Fayyazifar N. (2024). Best practices for machine learning strategies aimed at process parameter development in powder bed fusion additive manufacturing. Journal of Intelligent Manufacturing 36:4477-4517. https://doi.org/10.1007/s10845-024-02490-4 — 피인용 23회
  7. Gongora A. E., Xu B., Perry W., Okoye C., Riley P., Reyes K. G., et al. (2020). A Bayesian experimental autonomous researcher for mechanical design. Science Advances 6:eaaz1708. https://doi.org/10.1126/sciadv.aaz1708 — 피인용 289회
  8. Scime L., Beuth J. (2018). Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm. Additive Manufacturing 19:114-126. https://doi.org/10.1016/j.addma.2017.11.009 — 피인용 262회
  9. Ren Z., Gao L., Clark S. J., Fezzaa K., Shevchenko P., Choi A., et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379:89-94. https://doi.org/10.1126/science.add4667 — 피인용 337회
  10. Ren Z., Shao J., Liu H., Clark S. J., Gao L., Balderson L., et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3:045001. https://doi.org/10.1088/2752-5724/ad89e2 — 피인용 17회
  11. Zhu Q., Liu Z., Yan J. (2021). Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks. Computational Mechanics 67:619-635. https://doi.org/10.1007/s00466-020-01952-9 — 피인용 508회
  12. Pandiyan V., Drissi-Daoudi R., Shevchik S., Masinelli G., Le-Quang T., Logé R., et al. (2022). Deep transfer learning of additive manufacturing mechanisms across materials in metal-based laser powder bed fusion process. Journal of Materials Processing Technology 303:117531. https://doi.org/10.1016/j.jmatprotec.2022.117531 — 피인용 157회
  13. Levine L., Lane B., Becker C., Belak J., Carson R., Deisenroth D., et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13:598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회
  14. Akbari P, Ogoke F, Kao NY, Meidani K, Yeh CY, Lee W, et al. (2022). MeltpoolNet: Melt pool characteristic prediction in Metal Additive Manufacturing using machine learning. Additive Manufacturing 55:102817. https://doi.org/10.1016/j.addma.2022.102817 — 피인용 84회
  15. Hu Z., Yan W. (2024). Data-driven modeling of process-structure-property relationships in metal additive manufacturing. npj Advanced Manufacturing 1:3. https://doi.org/10.1038/s44334-024-00003-y — 피인용 56회

장 7 — 현장(in-situ) 모니터링과 계측​

  1. Everton SK, Hirsch M, Stravroulakis P, Leach RK, Clare AT. (2016). Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design 95:431-445. https://doi.org/10.1016/j.matdes.2016.01.099 — 피인용 1,396회
  2. Grasso M, Colosimo BM. (2017). Process defects and in situ monitoring methods in metal powder bed fusion: a review. Measurement Science and Technology 28(4):044005. https://doi.org/10.1088/1361-6501/aa5c4f — 피인용 824회
  3. Grasso M, Remani A, Dickins A, Colosimo BM, Leach RK. (2021). In-situ measurement and monitoring methods for metal powder bed fusion: an updated review. Measurement Science and Technology 32(11):112001. https://doi.org/10.1088/1361-6501/ac0b6b — 피인용 231회
  4. Fox J, Kim F, Lane B, Praniewicz M, Tondare V, Weaver J, et al. (2024). In-process monitoring and non-destructive evaluation for metal additive manufacturing processes. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ir.8538 — 피인용 5회
  5. McCann R, Obeidi MA, Hughes C, McCarthy É, Egan DS, Vijayaraghavan RK, et al. (2021). In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: A review. Additive Manufacturing 45:102058. https://doi.org/10.1016/j.addma.2021.102058 — 피인용 180회
  6. Moshiri M, Pedersen DB, Tosello G, Nadimpalli VK. (2023). Performance evaluation of in-situ near-infrared melt pool monitoring during laser powder bed fusion. Virtual and Physical Prototyping 18(1):e2205387. https://doi.org/10.1080/17452759.2023.2205387 — 피인용 26회
  7. Zhang Y, Hong GS, Ye D, Zhu K, Fuh JY. (2018). Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring. Materials & Design 156:458-469. https://doi.org/10.1016/j.matdes.2018.07.002
  8. Ero O, Taherkhani K, Toyserkani E. (2023). Optical tomography and machine learning for in-situ defects detection in laser powder bed fusion: A self-organizing map and U-Net based approach. Additive Manufacturing 78:103894. https://doi.org/10.1016/j.addma.2023.103894 — 피인용 19회
  9. Aydogan B, Chou K. (2024). Review of In Situ Detection and Ex Situ Characterization of Porosity in Laser Powder Bed Fusion Metal Additive Manufacturing. Metals 14(6):669. https://doi.org/10.3390/met14060669 — 피인용 27회
  10. Zhao C, Fezzaa K, Cunningham RW, Wen H, De Carlo F, Chen L, et al. (2017). Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction. Scientific Reports 7(1):3602. https://doi.org/10.1038/s41598-017-03761-2 — 피인용 570회
  11. Ren Z, Gao L, Clark SJ, Fezzaa K, Shevchenko P, Choi A, et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379(6627):89-94. https://doi.org/10.1126/science.add4667 — 피인용 337회
  12. Hamidi Nasab M, Masinelli G, de Formanoir C, Schlenger L, Van Petegem S, Esmaeilzadeh R, et al. (2023). Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting. Nature Communications 14(1):8008. https://doi.org/10.1038/s41467-023-43371-3 — 피인용 75회
  13. Galiègue L, Briffod F, Ito K, Masuo H, Watanabe M, Shiraiwa T, et al. (2025). Acoustic emission monitoring reveals keyhole formation and evolution. Scientific Reports 15(1):43243. https://doi.org/10.1038/s41598-025-27232-1 — 피인용 8회
  14. Ren Z, Shao J, Liu H, Clark SJ, Gao L, Balderson L, et al. (2024). Sub-millisecond keyhole pore detection in laser powder bed fusion using sound and light sensors and machine learning. Materials Futures 3(4):045001. https://doi.org/10.1088/2752-5724/ad89e2 — 피인용 17회
  15. Liu H, Guirguis D, Zeng X, Maurer L, Rajan V, Sanaei N, et al. (2026). Airborne acoustic emission enables sub-scanline keyhole porosity quantification and effective process characterization for metallic laser powder bed fusion. Additive Manufacturing 116:105062. https://doi.org/10.1016/j.addma.2025.105062 — 피인용 0회
  16. AbouelNour Y, Gupta N. (2022). In-situ monitoring of sub-surface and internal defects in additive manufacturing: A review. Materials & Design 222:111063. https://doi.org/10.1016/j.matdes.2022.111063 — 피인용 193회
  17. Snow Z, Scime L, Ziabari A, Fisher B, Paquit V. (2023). Scalable in situ non-destructive evaluation of additively manufactured components using process monitoring, sensor fusion, and machine learning. Additive Manufacturing 78:103817. https://doi.org/10.1016/j.addma.2023.103817 — 피인용 25회
  18. EOS GmbH. EOS Smart Monitoring — in-situ AM process monitoring and quality assurance (vendor product page). https://www.eos.info/enablement/software/eos-smart-monitoring

장 8 — 폐루프 공정 제어​

  1. Wang R, Standfield B, Dou C, Law AC, Kong ZJ. (2023). Real-time process monitoring and closed-loop control on laser power via a customized laser powder bed fusion platform. Additive Manufacturing 66:103449. https://doi.org/10.1016/j.addma.2023.103449 — 피인용 39회
  2. Yeung H. (2025). Toward real-time feedback control for powder bed fusion additive manufacturing. Additive Manufacturing 114:105041. https://doi.org/10.1016/j.addma.2025.105041 — 피인용 3회
  3. Mani M, Lane B, Donmez A, Feng S, Moylan S, Fesperman R. (2015). Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes. National Institute of Standards and Technology. https://doi.org/10.6028/nist.ir.8036 — 피인용 171회
  4. Grasso M, Colosimo BM. (2017). Process defects and in situ monitoring methods in metal powder bed fusion: a review. Measurement Science and Technology 28(4):044005. https://doi.org/10.1088/1361-6501/aa5c4f — 피인용 824회
  5. Liao-McPherson D, Balta EC, Afrasiabi M, Rupenyan A, Bambach M, Lygeros J. (2025). Layer-to-Layer Melt Pool Control in Laser Powder Bed Fusion. IEEE Transactions on Control Systems Technology 33(1):207-218. https://doi.org/10.1109/tcst.2024.3464118 — 피인용 15회
  6. Smoqi Z, Bevans BD, Gaikwad A, Craig J, Abul-Haj A, Roeder B, et al. (2022). Closed-loop control of meltpool temperature in directed energy deposition. Materials & Design 215:110508. https://doi.org/10.1016/j.matdes.2022.110508 — 피인용 97회
  7. Shin S, Jeon I, Sohn H. (2025). Enhanced geometric accuracy in directed energy deposition via closed-loop melt pool height control using real-time thermal imaging. Additive Manufacturing 109:104846. https://doi.org/10.1016/j.addma.2025.104846 — 피인용 6회
  8. Song L, Bagavath-Singh V, Dutta B, Mazumder J. (2011). Control of melt pool temperature and deposition height during direct metal deposition process. The International Journal of Advanced Manufacturing Technology 58(1-4):247-256. https://doi.org/10.1007/s00170-011-3395-2
  9. Wang Q, Li J, Nassar AR, Reutzel EW, Mitchell WF. (2021). Model-Based Feedforward Control of Part Height in Directed Energy Deposition. Materials 14(2):337. https://doi.org/10.3390/ma14020337 — 피인용 25회
  10. Ye L, Xue H, Li Z, Zhou Y, Chen G, Xu F, et al. (2025). Review of online quality control for laser directed energy deposition (LDED) additive manufacturing. International Journal of Extreme Manufacturing 7(6):062005. https://doi.org/10.1088/2631-7990/aded4f — 피인용 55회
  11. Singh M, Ravi K. (2026). Plasma plume emission-driven closed-loop control in directed energy deposition. Materials & Design 269:116730. https://doi.org/10.1016/j.matdes.2026.116730 — 피인용 0회
  12. Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — 피인용 20회
  13. McCann R, Obeidi MA, Hughes C, McCarthy É, Egan DS, Vijayaraghavan RK, et al. (2021). In-situ sensing, process monitoring and machine control in Laser Powder Bed Fusion: A review. Additive Manufacturing 45:102058. https://doi.org/10.1016/j.addma.2021.102058 — 피인용 180회
  14. Hong G, Cho J, Cho H. (2026). Ontology-enabled neuro-symbolic closed-loop control of laser powder bed fusion. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-026-03006-y — 피인용 0회
  15. Kavas B, Balta EC, Tucker MR, Krishnadas R, Rupenyan A, Lygeros J, et al. (2025). In-situ controller autotuning by Bayesian optimization for closed-loop feedback control of laser powder bed fusion process. Additive Manufacturing 99:104641. https://doi.org/10.1016/j.addma.2025.104641 — 피인용 10회
  16. Cai Y, Xiong J, Chen H, Zhang G. (2023). A review of in-situ monitoring and process control system in metal-based laser additive manufacturing. Journal of Manufacturing Systems 70:309-326. https://doi.org/10.1016/j.jmsy.2023.07.018 — 피인용 254회

장 9 — 적층제조용 합금과 분말 문제​

  1. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. (2017). 3D printing of high-strength aluminium alloys. Nature 549(7672):365-369. https://doi.org/10.1038/nature23894 — 피인용 2,956회
  2. Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS. (2016). The metallurgy and processing science of metal additive manufacturing. International Materials Reviews 61(5):315-360. https://doi.org/10.1080/09506608.2015.1116649 — 피인용 2,383회
  3. Sing SL, Yeong WY. (2020). Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments. Virtual and Physical Prototyping 15(3):359-370. https://doi.org/10.1080/17452759.2020.1779999 — 피인용 387회
  4. Wu C, Wen J, Zhang J, Song B, Shi Y. (2024). Additive manufacturing of heat-resistant aluminum alloys: a review. International Journal of Extreme Manufacturing 6(6):062013. https://doi.org/10.1088/2631-7990/ad7f2e — 피인용 57회
  5. Smith TM, Kantzos CA, Zarkevich NA, Harder BJ, Heczko M, Gradl PR, et al. (2023). A 3D printable alloy designed for extreme environments. Nature 617(7961):513-518. https://doi.org/10.1038/s41586-023-05893-0 — 피인용 280회
  6. Zhao Y, Ma Z, Yu L, Liu Y. (2023). New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys. Acta Materialia 247:118736. https://doi.org/10.1016/j.actamat.2023.118736 — 피인용 240회
  7. Funch CV, Proust G. (2024). Laser-based additive manufacturing of refractory metals and their alloys: A review. Additive Manufacturing 94:104464. https://doi.org/10.1016/j.addma.2024.104464 — 피인용 29회
  8. Mohammadnejad A, Sun M, Yarlapati NA, Hasanabadi M, Sadeghi E, Karimi P, et al. (2025). Additive manufacturing of refractory high-entropy alloys: A critical review of fundamentals and advances. Materials & Design 260:115261. https://doi.org/10.1016/j.matdes.2025.115261 — 피인용 33회
  9. Mooraj S, Kim G, Fan X, Samuha S, Xie Y, Li T, et al. (2024). Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders. Communications Materials 5(1):14. https://doi.org/10.1038/s43246-024-00452-0 — 피인용 71회
  10. Taghian M, Pilehvar Meibody A, Saboori A, Iuliano L. (2025). Challenges and opportunities in additive manufacturing of high entropy alloys. Journal of Alloys and Compounds 1034:181450. https://doi.org/10.1016/j.jallcom.2025.181450 — 피인용 49회
  11. Jarlöv A, Zhu Z, Ji W, Gao S, Hu Z, Vivegananthan P, et al. (2024). Recent progress in high-entropy alloys for laser powder bed fusion: Design, processing, microstructure, and performance. Materials Science and Engineering: R: Reports 161:100834. https://doi.org/10.1016/j.mser.2024.100834 — 피인용 81회
  12. Delacroix T, Lomello F, Schuster F, Maskrot H, Baslari C, Gaumet U, et al. (2023). Influence of build characteristics and chamber oxygen concentration on powder degradation in laser powder bed fusion. Powder Technology 416:118231. https://doi.org/10.1016/j.powtec.2023.118231 — 피인용 29회
  13. Soltani-Tehrani A, Isaac JP, Tippur HV, Silva DF, Shao S, Shamsaei N. (2023). Ti-6Al-4V powder reuse in laser powder bed fusion (L-PBF): The effect on porosity, microstructure, and mechanical behavior. International Journal of Fatigue 167:107343. https://doi.org/10.1016/j.ijfatigue.2022.107343 — 피인용 75회
  14. Ardila L, Garciandia F, González-Díaz J, Álvarez P, Echeverria A, Petite M, et al. (2014). Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting. Physics Procedia 56:99-107. https://doi.org/10.1016/j.phpro.2014.08.152
  15. Cordova L, Campos M, Tinga T. (2019). Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization. JOM 71(3):1062-1072. https://doi.org/10.1007/s11837-018-3305-2
  16. Tang HP, Qian M, Liu N, Zhang XZ, Yang GY, Wang J. (2015). Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting. JOM 67(3):555-563. https://doi.org/10.1007/s11837-015-1300-4
  17. Sun X, Chen M, Liu T, Zhang K, Wei H, Zhu Z, et al. (2023). Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review. International Journal of Extreme Manufacturing 6(1):012003. https://doi.org/10.1088/2631-7990/acfbc3 — 피인용 86회

장 10 — 다중 재료, 기능 경사, 4D 프린팅​

  1. Bandyopadhyay A, Heer B. (2018). Additive manufacturing of multi-material structures. Materials Science and Engineering: R: Reports 129:1-16. https://doi.org/10.1016/j.mser.2018.04.001 — 피인용 1,019회
  2. Hofmann DC, Kolodziejska J, Roberts S, Otis R, Dillon RP, Suh JO, et al. (2014). Compositionally graded metals: A new frontier of additive manufacturing. Journal of Materials Research 29(17):1899-1910. https://doi.org/10.1557/jmr.2014.208 — 피인용 254회
  3. Skylar-Scott MA, Mueller J, Visser CW, Lewis JA. (2019). Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575(7782):330-335. https://doi.org/10.1038/s41586-019-1736-8 — 피인용 1,032회
  4. Kenny V, Yang G, Bapat S, Malshe AP. (2026). Interfacial integrity in multi-metal additive manufacturing: challenges, mechanisms, and processing strategies. Progress in Additive Manufacturing 11(10):10071-10099. https://doi.org/10.1007/s40964-026-01888-1 — 피인용 2회
  5. Wu Z, Wilson-Heid AE, Griffiths RJ, Elton ES. (2023). A review on experimentally observed mechanical and microstructural characteristics of interfaces in multi-material laser powder bed fusion. Frontiers in Mechanical Engineering 9:1087021. https://doi.org/10.3389/fmech.2023.1087021 — 피인용 24회
  6. Ostolaza M, Arrizubieta JI, Lamikiz A, Plaza S, Ortega N. (2023). Latest Developments to Manufacture Metal Matrix Composites and Functionally Graded Materials through AM: A State-of-the-Art Review. Materials 16(4):1746. https://doi.org/10.3390/ma16041746 — 피인용 101회
  7. Baroutaji A, Arjunan A, Robinson J, Djavanroodi F, Khan M, Vance A, et al. (2026). A critical review on metal multi-material additive manufacturing: Advancements, challenges, and prospects. Journal of Materials Research and Technology 44:4455-4476. https://doi.org/10.1016/j.jmrt.2026.08.209 — 피인용 0회
  8. Ghanavati R, Mosallanejad MH, Behjat A, Taghian M, Fino P, Iuliano L, et al. (2026). Multi-material processing of metallic components by direct additive manufacturing methods: technologies, scientific insights, and industrial applications. International Journal of Extreme Manufacturing 8(4):042004. https://doi.org/10.1088/2631-7990/ae5295 — 피인용 9회
  9. Ma Z, Liu W, Li W, Liu H, Song J, Liu Y, et al. (2024). Additive manufacturing of functional gradient materials: A review of research progress and challenges. Journal of Alloys and Compounds 971:172642. https://doi.org/10.1016/j.jallcom.2023.172642 — 피인용 130회
  10. Gradl PR, Protz CS, Zagorski K, Doshi V, McCallum H. (2019). Additive Manufacturing and Hot-fire Testing of Bimetallic GRCop-84 and C-18150 Channel-Cooled Combustion Chambers Using Powder Bed Fusion and Inconel 625 Hybrid Directed Energy Deposition. AIAA Propulsion and Energy 2019 Forum. https://doi.org/10.2514/6.2019-4390 — 피인용 22회
  11. Gradl PR, Teasley TW, Protz CS, Garcia MB, Ellis D, Kantzos C. (2021). Advancing GRCop-based Bimetallic Additive Manufacturing to Optimize Component Design and Applications for Liquid Rocket Engines. AIAA Propulsion and Energy 2021 Forum. https://doi.org/10.2514/6.2021-3231 — 피인용 30회
  12. Clare A, Woizeschke P, Rankouhi B, Pfefferkorn F, Bartels D, Schmidt M, et al. (2025). Metal multi-material additive manufacturing: Overcoming barriers to implementation. CIRP Annals 74(2):869-893. https://doi.org/10.1016/j.cirp.2025.05.004 — 피인용 52회
  13. Espera AH, Dizon JRC, Chen Q, Advincula RC. (2019). 3D-printing and advanced manufacturing for electronics. Progress in Additive Manufacturing 4(3):245-267. https://doi.org/10.1007/s40964-019-00077-7
  14. Kamyshny A, Magdassi S. (2019). Conductive nanomaterials for 2D and 3D printed flexible electronics. Chemical Society Reviews 48(6):1712-1740. https://doi.org/10.1039/c8cs00738a
  15. Słoma M. (2023). 3D printed electronics with nanomaterials. Nanoscale 15(12):5623-5648. https://doi.org/10.1039/d2nr06771d — 피인용 73회
  16. Yan S, Zhang F, Luo L, Wang L, Liu Y, Leng J. (2023). Shape Memory Polymer Composites: 4D Printing, Smart Structures, and Applications. Research 6:0234. https://doi.org/10.34133/research.0234 — 피인용 141회
  17. Ge Q, Sakhaei AH, Lee H, Dunn CK, Fang NX, Dunn ML. (2016). Multimaterial 4D Printing with Tailorable Shape Memory Polymers. Scientific Reports 6(1):31110. https://doi.org/10.1038/srep31110 — 피인용 1,083회
  18. Sydney Gladman A, Matsumoto EA, Nuzzo RG, Mahadevan L, Lewis JA. (2016). Biomimetic 4D printing. Nature Materials 15(4):413-418. https://doi.org/10.1038/nmat4544 — 피인용 3,005회
  19. Hassan M, Mohanty AK, Wang T, Dhakal HN, Misra M. (2025). Current status and future outlook of 4D printing of polymers and composites-A prospective. Composites Part C: Open Access 17:100602. https://doi.org/10.1016/j.jcomc.2025.100602 — 피인용 31회
  20. Ding A, Tang F, Alsberg E. (2025). The Emerging 4D Printing of Shape‐Memory Thermomorphs for Self‐Adaptative Biomedical Implants. Advanced Functional Materials 35(28):2418348. https://doi.org/10.1002/adfm.202418348 — 피인용 52회
  21. Cicek UI, Southee DJ, Johnson AA. (2023). 2D characterisation and evaluation of multi-material structures towards 3D hybrid printing. Virtual and Physical Prototyping 18(1):e2181193. https://doi.org/10.1080/17452759.2023.2181193 — 피인용 11회

장 11 — 바이오프린팅과 마이크로·나노 적층제조​

  1. Murphy SV, De Coppi P, Atala A. (2019). Opportunities and challenges of translational 3D bioprinting. Nature Biomedical Engineering 4(4):370-380. https://doi.org/10.1038/s41551-019-0471-7 — 피인용 530회
  2. Murphy SV, Atala A. (2014). 3D bioprinting of tissues and organs. Nature Biotechnology 32(8):773-785. https://doi.org/10.1038/nbt.2958 — 피인용 6,663회
  3. Moroni L, Boland T, Burdick JA, De Maria C, Derby B, Forgacs G, et al. (2018). Biofabrication: A Guide to Technology and Terminology. Trends in Biotechnology 36(4):384-402. https://doi.org/10.1016/j.tibtech.2017.10.015 — 피인용 611회
  4. Xu HQ, Liu JC, Zhang ZY, Xu CX. (2022). A review on cell damage, viability, and functionality during 3D bioprinting. Military Medical Research 9(1):70. https://doi.org/10.1186/s40779-022-00429-5 — 피인용 159회
  5. Li B, Wang Z, Huang C, Xu L, Huang S, Qu M, et al. (2025). A comprehensive review on the printing efficiency, precision, and cell viability in 3D bioprinting. Medical Engineering & Physics 145(1):104448. https://doi.org/10.1016/j.medengphy.2025.104448 — 피인용 27회
  6. Elango J, Zamora-Ledezma C. (2025). Rheological, Structural, and Biological Trade-Offs in Bioink Design for 3D Bioprinting. Gels 11(8):659. https://doi.org/10.3390/gels11080659 — 피인용 85회
  7. Gungor-Ozkerim PS, Inci I, Zhang YS, Khademhosseini A, Dokmeci MR. (2018). Bioinks for 3D bioprinting: an overview. Biomaterials Science 6(5):915-946. https://doi.org/10.1039/c7bm00765e — 피인용 1,414회
  8. Malda J, Visser J, Melchels FP, Jüngst T, Hennink WE, Dhert WJA, et al. (2013). 25th Anniversary Article: Engineering Hydrogels for Biofabrication. Advanced Materials 25(36):5011-5028. https://doi.org/10.1002/adma.201302042 — 피인용 1,823회
  9. Skylar-Scott MA, Uzel SGM, Nam LL, Ahrens JH, Truby RL, Damaraju S, et al. (2019). Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels. Science Advances 5(9):eaaw2459. https://doi.org/10.1126/sciadv.aaw2459 — 피인용 981회
  10. Grigoryan B, Paulsen SJ, Corbett DC, Sazer DW, Fortin CL, Zaita AJ, et al. (2019). Multivascular networks and functional intravascular topologies within biocompatible hydrogels. Science 364(6439):458-464. https://doi.org/10.1126/science.aav9750 — 피인용 1,411회
  11. Kelly BE, Bhattacharya I, Heidari H, Shusteff M, Spadaccini CM, Taylor HK. (2019). Volumetric additive manufacturing via tomographic reconstruction. Science 363(6431):1075-1079. https://doi.org/10.1126/science.aau7114 — 피인용 1,024회
  12. Loterie D, Delrot P, Moser C. (2020). High-resolution tomographic volumetric additive manufacturing. Nature Communications 11(1):852. https://doi.org/10.1038/s41467-020-14630-4 — 피인용 468회
  13. 3DBio Therapeutics. (2022, June 2). 3DBio Therapeutics and the Microtia-Congenital Ear Deformity Institute conduct human ear reconstruction using 3D-bioprinted living tissue implant in a first-in-human clinical trial (press release). https://www.businesswire.com/news/home/20220602005051/en/3DBio-Therapeutics-and-the-Microtia-Congenital-Ear-Deformity-Institute-Conduct-Human-Ear-Reconstruction-Using-3D-Bioprinted-Living-Tissue-Implant-in-a-First-in-Human-Clinical-Trial
  14. ClinicalTrials.gov. (record NCT04399239). AuriNovo for Auricular Reconstruction (sponsor: 3DBio Therapeutics; status: terminated; actual enrollment 2; no results posted). U.S. National Library of Medicine. https://clinicaltrials.gov/study/NCT04399239
  15. Perin F, Ouyang L, Lim KS, Motta A, Maniglio D, Moroni L, et al. (2025). Bioprinted Constructs in the Regulatory Landscape: Current State and Future Perspectives. Advanced Materials 38(4):e04037. https://doi.org/10.1002/adma.202504037 — 피인용 56회
  16. Mathur V, Agarwal P, Kasturi M, Srinivasan V, Seetharam RN, Vasanthan KS. (2025). Innovative bioinks for 3D bioprinting: Exploring technological potential and regulatory challenges. Journal of Tissue Engineering 16:20417314241308022. https://doi.org/10.1177/20417314241308022 — 피인용 107회
  17. Ouyang W, Xu X, Lu W, Zhao N, Han F, Chen SC. (2023). Ultrafast 3D nanofabrication via digital holography. Nature Communications 14(1):1716. https://doi.org/10.1038/s41467-023-37163-y — 피인용 162회
  18. Jaiswal A, Rastogi CK, Rani S, Singh GP, Saxena S, Shukla S. (2023). Two decades of two-photon lithography: Materials science perspective for additive manufacturing of 2D/3D nano-microstructures. iScience 26(4):106374. https://doi.org/10.1016/j.isci.2023.106374 — 피인용 151회
  19. Cantoni F, Maher D, Bosler E, Kühne S, Barbe L, Oberschmidt D, et al. (2023). Round-robin testing of commercial two-photon polymerization 3D printers. Additive Manufacturing 76:103761. https://doi.org/10.1016/j.addma.2023.103761 — 피인용 32회

장 12 — 대형 적층제조와 건설​

  1. Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P. (2016). Wire + Arc Additive Manufacturing. Materials Science and Technology 32(7):641-647. https://doi.org/10.1179/1743284715y.0000000073 — 피인용 1,770회
  2. Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, et al. (2018). A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. Journal of Manufacturing Processes 35:127-139. https://doi.org/10.1016/j.jmapro.2018.08.001 — 피인용 1,557회
  3. Gardner L, Kyvelou P, Herbert G, Buchanan C. (2020). Testing and initial verification of the world's first metal 3D printed bridge. Journal of Constructional Steel Research 172:106233. https://doi.org/10.1016/j.jcsr.2020.106233 — 피인용 334회
  4. Shah A, Aliyev R, Zeidler H, Krinke S. (2023). A Review of the Recent Developments and Challenges in Wire Arc Additive Manufacturing (WAAM) Process. Journal of Manufacturing and Materials Processing 7(3):97. https://doi.org/10.3390/jmmp7030097 — 피인용 190회
  5. MX3D. Controlling distortion and residual stress in multi meter prints: an industrial engineering guide to thermal management (vendor guide, 2026). https://mx3d.com/controlling-distortion-and-residual-stress-in-multi-meter-prints
  6. Pignatelli F, Percoco G. (2022). An application- and market-oriented review on large format additive manufacturing, focusing on polymer pellet-based 3D printing. Progress in Additive Manufacturing 7(6):1363-1377. https://doi.org/10.1007/s40964-022-00309-3 — 피인용 107회
  7. Oak Ridge National Laboratory. Breaking barriers in polymer additive manufacturing. OSTI. https://www.osti.gov/servlets/purl/1185467
  8. Vicente CMS, Sardinha M, Reis L, Ribeiro A, Leite M. (2023). Large-format additive manufacturing of polymer extrusion-based deposition systems: review and applications. Progress in Additive Manufacturing 8(6):1257-1280. https://doi.org/10.1007/s40964-023-00397-9 — 피인용 108회
  9. Goh GD, Wong KK, Tan N, Seet HL, Nai MLS. (2024). Large-format additive manufacturing of polymers: a review of fabrication processes, materials, and design. Virtual and Physical Prototyping 19(1):e2336160. https://doi.org/10.1080/17452759.2024.2336160 — 피인용 150회
  10. Duty CE, Kunc V, Compton B, Post B, Erdman D, Smith R, et al. (2017). Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials. Rapid Prototyping Journal 23(1):181-189. https://doi.org/10.1108/rpj-12-2015-0183
  11. Gao X, Qi S, Kuang X, Su Y, Li J, Wang D. (2021). Fused filament fabrication of polymer materials: A review of interlayer bond. Additive Manufacturing 37:101658. https://doi.org/10.1016/j.addma.2020.101658
  12. Bos F, Wolfs R, Ahmed Z, Salet T. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual and Physical Prototyping 11(3):209-225. https://doi.org/10.1080/17452759.2016.1209867 — 피인용 1,173회
  13. Buswell R, Leal de Silva W, Jones S, Dirrenberger J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research 112:37-49. https://doi.org/10.1016/j.cemconres.2018.05.006 — 피인용 1,574회
  14. Raphael B, Senthilnathan S, Patel A, Bhat S. (2023). A review of concrete 3D printed structural members. Frontiers in Built Environment 8:1034020. https://doi.org/10.3389/fbuil.2022.1034020 — 피인용 61회
  15. Ding T, Xiao J, Mechtcherine V. (2023). Microstructure and mechanical properties of interlayer regions in extrusion-based 3D printed concrete: A critical review. Cement and Concrete Composites 141:105154. https://doi.org/10.1016/j.cemconcomp.2023.105154 — 피인용 153회
  16. Wolfs R, Bos F, Salet T. (2019). Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion. Cement and Concrete Research 119:132-140. https://doi.org/10.1016/j.cemconres.2019.02.017 — 피인용 792회
  17. Zhou Y, Althoey F, Alotaibi BS, Gamil Y, Iftikhar B. (2023). An overview of recent advancements in fibre-reinforced 3D printing concrete. Frontiers in Materials 10:1289340. https://doi.org/10.3389/fmats.2023.1289340 — 피인용 26회
  18. Nan B, Qiao Y, Leng J, Bai Y. (2025). Advancing Structural Reinforcement in 3D-Printed Concrete: Current Methods, Challenges, and Innovations. Materials 18(2):252. https://doi.org/10.3390/ma18020252 — 피인용 38회
  19. Bos F, Ahmed Z, Jutinov E, Salet T. (2017). Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete. Materials 10(11):1314. https://doi.org/10.3390/ma10111314
  20. Gebhard L, Mata-Falcón J, Anton A, Dillenburger B, Kaufmann W. (2021). Structural behaviour of 3D printed concrete beams with various reinforcement strategies. Engineering Structures 240:112380. https://doi.org/10.1016/j.engstruct.2021.112380
  21. ISO/ASTM 52939:2023 — Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements. ISO/ASTM. https://www.iso.org/standard/81177.html
  22. International Code Council. (2026). Advancing the Future of Construction: A New Standard for 3D Printed Wall Systems (ICC 1150, Standard for Automated Construction Technology for 3D Printing Walls; Building Safety Journal, 26 August 2026). https://www.iccsafe.org/building-safety-journal/bsj-technical/advancing-the-future-of-construction-a-new-standard-for-3d-printed-wall-systems/
  23. NIST. Additive Construction — The Path to Standardization II (workshop report). https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=958971

장 13 — 적격성 평가와 인증: 핵심 병목​

  1. Seifi M, Salem A, Beuth J, Harrysson O, Lewandowski JJ. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM 68:747-764. https://doi.org/10.1007/s11837-015-1810-0 — 피인용 570회
  2. Chen Z, Han C, Gao M, Kandukuri SY, Zhou K. (2022). A review on qualification and certification for metal additive manufacturing. Virtual and Physical Prototyping 17(2):382-405. https://doi.org/10.1080/17452759.2021.2018938 — 피인용 182회
  3. Frazier WE. (2014). Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance 23(6):1917-1928. https://doi.org/10.1007/s11665-014-0958-z — 피인용 5,640회
  4. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, et al. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — 피인용 2,269회
  5. NIST. (created 2018, updated 2025). Additive Manufacturing Part Qualification (project page). National Institute of Standards and Technology. https://www.nist.gov/programs-projects/additive-manufacturing-part-qualification
  6. NASA. (2021). NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems (baseline approved 2021-04-21). https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  7. NASA. (2026). A Frank Discussion on Lessons Learned from Adopting NASA-STD-6030 (WAMS 2026 presentation). NASA Technical Reports Server. https://ntrs.nasa.gov/api/citations/20260004731/downloads/A%20Frank%20Discussion%20on%20NASA-STD-6030WAMS%202026%20V4.pdf
  8. FAA. (2023). Advisory Circular AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts (dated 2023-06-23). Federal Aviation Administration. https://www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentID/1041938
  9. EASA. (2025). Certification Memorandum CM-S-008 Issue 04 — Additive Manufacturing. European Union Aviation Safety Agency. https://www.easa.europa.eu/en/downloads/142437/en
  10. Aerospace Industries Association. (2020). Additive Manufacturing Best Practices: Recommended Guidance for Certification of AM Components. https://www.aia-aerospace.org/wp-content/uploads/AIA-Additive-Manufacturing-Best-Practices-Report-Final-Feb2020.pdf
  11. GE Aviation. (2015-04-14). The FAA Cleared the First 3D Printed Part to Fly in a Commercial Jet Engine from GE (vendor statement about its own T25 sensor housing). GE News. https://www.ge.com/news/reports/the-faa-cleared-the-first-3d-printed-part-to-fly-2
  12. GE Aerospace. Landmark Technologies (vendor statement: more than 10 additively made parts FAA-approved across GE90, LEAP, GEnx and GE9X; GE9X FAA certification in 2020). https://www.geaerospace.com/sustainability/innovation/landmark-technologies
  13. U.S. FDA. (2017). Technical Considerations for Additive Manufactured Medical Devices — Guidance for Industry and FDA Staff (final, 5 December 2017). https://www.fda.gov/regulatory-information/search-fda-guidance-documents/technical-considerations-additive-manufactured-medical-devices
  14. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  15. ISO/ASTM TS 52930:2021 — Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment. ISO/ASTM. https://www.iso.org/standard/79527.html
  16. Seifi M, Gorelik M, Waller J, Hrabe N, Shamsaei N, Daniewicz S, et al. (2017). Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification. JOM 69(3):439-455. https://doi.org/10.1007/s11837-017-2265-2 — 피인용 381회
  17. AFRL / NIAR. (2025). Operational Qualification Guidance Document (AFRL-2025-1254; supplements AMS 7003 and AMS 7032). https://www.wichita.edu/industry_and_defense/NIAR/Documents/Operational_Qualification_Guidance_Document_AFRL-2025-1254.pdf
  18. Argonne National Laboratory. (2023). ANL-AMMT-009 — ASME Code Qualification Plan for LPBF 316 SS. https://www.osti.gov/biblio/1997134
  19. Mani M, Lane BM, Donmez MA, Feng SC, Moylan SP. (2016). A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes. International Journal of Production Research 55(5):1400-1418. https://doi.org/10.1080/00207543.2016.1223378 — 피인용 206회
  20. Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — 피인용 1,821회

장 14 — 디지털 스레드, 데이터, 공급망​

  1. Li S, Aggour KS, Lu Y, Coutts P, Harris B, Kitt A, et al. (2023). Enabling FAIR data in additive manufacturing to accelerate industrialization. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.500-1 — 피인용 5회
  2. Mies D, Marsden W, Warde S. (2016). Overview of Additive Manufacturing Informatics: “A Digital Thread”. Integrating Materials and Manufacturing Innovation 5(1):114-142. https://doi.org/10.1186/s40192-016-0050-7 — 피인용 103회
  3. ISO/IEC. (2025). ISO/IEC 25422:2025 — Information technology — 3D Manufacturing Format (3MF) specification suite (edition 1, June 2025). https://www.iso.org/standard/90283.html
  4. 3MF Consortium. (2025). 3MF: An ISO Standard for the Future of Additive Manufacturing (announcement of ISO/IEC 25422:2025; consortium statement, last updated 2025-07-31). https://3mf.io/announcement/2025/07/3mf-an-iso-standard-for-the-future-of-additive-manufacturing/
  5. Rodriguez E, Alvares A, Riaño C. (2025). STEP-NC in additive manufacturing: a comprehensive review, architecture, and data model proposal. The International Journal of Advanced Manufacturing Technology 137(11-12):5751-5787. https://doi.org/10.1007/s00170-025-15290-8 — 피인용 22회
  6. Li S, Feng S, Kuan A, Lu Y. (2024). Toward a Standard Data Architecture for Additive Manufacturing. JOM 76(4):1905-1912. https://doi.org/10.1007/s11837-023-06367-4 — 피인용 8회
  7. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  8. Khajavi, S. H., Partanen, J., Holmström, J. (2014). Additive manufacturing in the spare parts supply chain. Computers in Industry 65(1):50-63. https://doi.org/10.1016/j.compind.2013.07.008 — 피인용 614회
  9. Holmström J, Partanen J, Tuomi J, Walter M. (2010). Rapid manufacturing in the spare parts supply chain. Journal of Manufacturing Technology Management 21(6):687-697. https://doi.org/10.1108/17410381011063996 — 피인용 393회
  10. Liu P, Huang SH, Mokasdar A, Zhou H, Hou L. (2013). The impact of additive manufacturing in the aircraft spare parts supply chain: supply chain operation reference (scor) model based analysis. Production Planning & Control 25(13-14):1169-1181. https://doi.org/10.1080/09537287.2013.808835 — 피인용 222회
  11. Li Y, Jia G, Cheng Y, Hu Y. (2016). Additive manufacturing technology in spare parts supply chain: a comparative study. International Journal of Production Research 55(5):1498-1515. https://doi.org/10.1080/00207543.2016.1231433
  12. Naghshineh, B., Fragoso, R., Carvalho, H. (2023). Rethinking Additive Manufacturing for Spare Parts Supply Chain Management. Research-Technology Management 66(4):38-47. https://doi.org/10.1080/08956308.2023.2207970 — 피인용 15회
  13. Witherell P, Frazier W. (2024). Empowering small and medium-sized enterprises through effective additive manufacturing data management. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.100-59 — 피인용 2회
  14. Zeltmann SE, Gupta N, Tsoutsos NG, Maniatakos M, Rajendran J, Karri R. (2016). Manufacturing and Security Challenges in 3D Printing. JOM 68(7):1872-1881. https://doi.org/10.1007/s11837-016-1937-7
  15. Sturm LD, Williams CB, Camelio JA, White J, Parker R. (2017). Cyber-physical vulnerabilities in additive manufacturing systems: A case study attack on the .STL file with human subjects. Journal of Manufacturing Systems 44:154-164. https://doi.org/10.1016/j.jmsy.2017.05.007 — 피인용 181회
  16. Belikovetsky S, Yampolskiy M, Toh J, Gatlin J, Elovici Y. (2017). dr0wned – Cyber-Physical Attack with Additive Manufacturing. 11th USENIX Workshop on Offensive Technologies (WOOT 17). https://www.usenix.org/conference/woot17/workshop-program/presentation/belikovetsky
  17. Alkofahi H, Alawneh H, Skjellum A. (2024). MitM attacks on intellectual property and integrity of additive manufacturing systems: A security analysis. Computers & Security 140:103810. https://doi.org/10.1016/j.cose.2024.103810 — 피인용 13회
  18. Kumar M, Epiphaniou G, Maple C. (2025). Security of cyber-physical Additive Manufacturing supply chain: Survey, attack taxonomy and solutions. Computers & Security 157:104557. https://doi.org/10.1016/j.cose.2025.104557 — 피인용 9회
  19. Department of Defense Office of Inspector General. (2019). Audit of the DoD's Use of Additive Manufacturing for Sustainment Parts (report DODIG-2020-003, released 21 October 2019). https://media.defense.gov/2019/Oct/21/2002197659/-1/-1/1/DODIG-2020-003.pdf

장 15 — 지속가능성과 전과정평가​

  1. Ford S, Despeisse M. (2016). Additive manufacturing and sustainability: an exploratory study of the advantages and challenges. Journal of Cleaner Production 137:1573-1587. https://doi.org/10.1016/j.jclepro.2016.04.150 — 피인용 1,724회
  2. Kellens K, Baumers M, Gutowski TG, Flanagan W, Lifset R, Duflou JR. (2017). Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications. Journal of Industrial Ecology 21(S1):S49–S68. https://doi.org/10.1111/jiec.12629 — 피인용 300회
  3. Faludi J, Baumers M, Maskery I, Hague R. (2017). Environmental Impacts of Selective Laser Melting: Do Printer, Powder, or Power Dominate? Journal of Industrial Ecology 21(S1):S144–S156. https://doi.org/10.1111/jiec.12528 — 피인용 174회
  4. Cozzolino E, Papa I, Astarita A. (2025). Gate-to-Gate Life Cycle Assessment of Printed AlSi10Mg Laser Powder Bed Fusion Jobs in Additive Manufacturing Factories. Journal of Materials Engineering and Performance 34(15):15306-15314. https://doi.org/10.1007/s11665-025-10867-6 — 피인용 9회
  5. Cozzolino E, Papa I, Astarita A. (2025). Energy Assessment of Powder Bed Fusion Additive Manufacturing Processes at Industrial Scale: Experiments and Simulations. Journal of Materials Engineering and Performance 34(15):15315-15323. https://doi.org/10.1007/s11665-025-11007-w — 피인용 8회
  6. Ehmsen S, Conrads J, Klar M, Aurich JC. (2025). Environmental impact of powder production for additive manufacturing: Carbon footprint and cumulative energy demand of gas atomization. Journal of Manufacturing Systems 82:13-25. https://doi.org/10.1016/j.jmsy.2025.05.004 — 피인용 24회
  7. Jung S, Kara LB, Nie Z, Simpson TW, Whitefoot KS. (2023). Is Additive Manufacturing an Environmentally and Economically Preferred Alternative for Mass Production?. Environmental Science & Technology 57(16):6373-6386. https://doi.org/10.1021/acs.est.2c04927 — 피인용 161회
  8. Faludi J, Bayley C, Bhogal S, Iribarne M. (2015). Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal 21(1):14-33. https://doi.org/10.1108/rpj-07-2013-0067 — 피인용 393회
  9. Huang R, Riddle M, Graziano D, Warren J, Das S, Nimbalkar S, Cresko J, Masanet E. (2016). Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. Journal of Cleaner Production 135:1559–1570. https://doi.org/10.1016/j.jclepro.2015.04.109 — 피인용 740회
  10. Golisano Institute for Sustainability, Rochester Institute of Technology. (2023, 17 February). Life Cycle Assessment (LCA) Report: Comparative LCA of a Low-Pressure Turbine (LPT) Bracket by Two Manufacturing Methods — Final Report. Prepared for AMGTA. https://amgta.org/wp-content/uploads/2023/03/AMGTA_LCA_Final_Report_20230301.pdf
  11. Ferreira BT, Monteiro J, Borille A, Leite M, Ribeiro I. (2025). Reuse powder impacts in additive manufacturing for aeronautical parts. The International Journal of Advanced Manufacturing Technology 141(3-4):2027-2062. https://doi.org/10.1007/s00170-025-16619-z — 피인용 10회
  12. Kokare S, Oliveira J, Godina R. (2023). Life cycle assessment of additive manufacturing processes: A review. Journal of Manufacturing Systems 68:536-559. https://doi.org/10.1016/j.jmsy.2023.05.007 — 피인용 252회
  13. Mohammadkamal H, Zinatlou Ajabshir S, Mostafaei A. (2025). Additive Manufacturing at the Crossroads: Costs, Sustainability, and Global Adoption. Journal of Manufacturing and Materials Processing 10(1):5. https://doi.org/10.3390/jmmp10010005 — 피인용 14회

장 16 — 비용, 처리량, 양산 확장​

  1. Hopkinson N, Dicknes P. (2003). Analysis of rapid manufacturing—using layer manufacturing processes for production. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217(1):31-39. https://doi.org/10.1243/095440603762554596 — 피인용 287회
  2. Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — 피인용 593회
  3. Laureijs RE, Roca JB, Narra SP, Montgomery C, Beuth JL, Fuchs ERH. (2017). Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes. Journal of Manufacturing Science and Engineering 139(8):081010. https://doi.org/10.1115/1.4035420 — 피인용 136회
  4. Thomas, D. S., Gilbert, S. W. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.1176.pdf
  5. Wohlers Associates / ASTM International. (2026-02-17). New Wohlers Report 2026 Values Additive Manufacturing Market at $24.2B. https://wohlersassociates.com/press-releases/new-wohlers-report-2026-values-additive-manufacturing-market-at-24-2b/
  6. AMPOWER. (2025). Metal Additive Manufacturing market 2025. AMPOWER Report on Additive Manufacturing. https://additive-manufacturing-report.com/metal-additive-manufacturing-market-2025/
  7. Karaş, B., Shokrani, A. (2025). Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation. npj Advanced Manufacturing 2:24. https://doi.org/10.1038/s44334-025-00036-x — 피인용 3회
  8. Ruffo M, Tuck C, Hague R. (2006). Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220(9):1417-1427. https://doi.org/10.1243/09544054jem517
  9. Parenti, P., Puccio, D., Semeraro, Q., Colosimo, B. M. (2024). A techno-economic approach for decision-making in metal additive manufacturing: metal extrusion versus single and multiple laser powder bed fusion. Progress in Additive Manufacturing 9:185-210. https://doi.org/10.1007/s40964-023-00442-7 — 피인용 38회
  10. Rothfelder R, Nahr F, Chechik L, Bartels D, Schmidt M. (2023). A Brief History of the Progress of Laser Powder Bed Fusion of Metals in Europe. Journal of Manufacturing Science and Engineering 145(10):100801. https://doi.org/10.1115/1.4062788 — 피인용 8회
  11. Wang, P., Robertson, G., Gibson, B. T., Fancher, C. M., Reynolds, J., Borish, M., Cruz, J. R., Chesser, P., Stump, B., Jackson, A., MacDonald, E. (2024). Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing. 3D Printing and Additive Manufacturing 11(1):231-241. https://doi.org/10.1089/3dp.2022.0288 — 피인용 20회
  12. GE Aerospace. (2018-10-04). Manufacturing Milestone: 30,000 Additive Fuel Nozzles. GE Aerospace News. https://www.geaerospace.com/news/articles/manufacturing/manufacturing-milestone-30000-additive-fuel-nozzles
  13. Align Technology. (2026). Form 10-K for the fiscal year ended 31 December 2025. U.S. Securities and Exchange Commission (company filing; statements about Align's own process and products). https://www.sec.gov/Archives/edgar/data/1097149/000109714926000026/algn-20251231x10kasfiled.pdf
  14. Align Technology. (2024-01). Align Technology Completes Acquisition of Cubicure, a Pioneer of Direct 3D Printing Solutions for Polymer Additive Manufacturing. https://investor.aligntech.com/news-releases/news-release-details/align-technology-completes-acquisition-cubicure-pioneer-direct
  15. Nano Dimension. (2025-07-28). Nano Dimension Statement Regarding Desktop Metal Bankruptcy and Strategic Decision Not to Acquire Assets (parent-company statement about its subsidiary). https://investors.nano-di.com/press-releases/news-details/2025/Nano-Dimension-Statement-Regarding-Desktop-Metal-Bankruptcy-and-Strategic-Decision-Not-to-Acquire-Assets/default.aspx
  16. Weller C, Kleer R, Piller FT. (2015). Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited. International Journal of Production Economics 164:43-56. https://doi.org/10.1016/j.ijpe.2015.02.020 — 피인용 699회

장 17 — 실습 4 — 오픈소스 코드로 용융풀 시뮬레이션하기​

  1. NIST. (2018). AMB2018-02 Description (AM Bench 2018, single laser tracks on bare IN625 plates). National Institute of Standards and Technology. https://www.nist.gov/ambench/amb2018-02-description
  2. Levine L, Lane B, Heigel J, Migler K, Stoudt M, Phan T, et al. (2020). Outcomes and Conclusions from the 2018 AM-Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 9(1):1-15. https://doi.org/10.1007/s40192-019-00164-1 — 피인용 77회
  3. Rosenthal D. (1946). The Theory of Moving Sources of Heat and Its Application to Metal Treatments. Journal of Fluids Engineering 68(8):849-865. https://doi.org/10.1115/1.4018624 — 피인용 357회
  4. ORNL. AdditiveFOAM, release 2.0.0 (GPL-3.0-or-later; documentation for 2.0 targets OpenFOAM-14). Oak Ridge National Laboratory. https://github.com/ORNL/AdditiveFOAM/releases/tag/2.0.0 and https://ornl.github.io/AdditiveFOAM/
  5. LLNL. ExaCA, release 2.1.0 (MIT license). Lawrence Livermore National Laboratory. https://github.com/LLNL/ExaCA/releases/tag/2.1.0
  6. Promoppatum P, Yao SC, Pistorius PC, Rollett AD. (2017). A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion. Engineering 3(5):685-694. https://doi.org/10.1016/j.eng.2017.05.023 — 피인용 273회
  7. OpenFOAM Foundation. Download OpenFOAM 14 (Ubuntu packages). The OpenFOAM Foundation. https://openfoam.org/download/14-ubuntu/
  8. Rolchigo M, Reeve ST, Stump B, Knapp GL, Coleman J, Plotkowski A, et al. (2022). ExaCA: A performance portable exascale cellular automata application for alloy solidification modeling. Computational Materials Science 214:111692. https://doi.org/10.1016/j.commatsci.2022.111692 — 피인용 54회
  9. Lane B, Heigel J, Ricker R, Zhirnov I, Khromschenko V, Weaver J, et al. (2020). Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates. Integrating Materials and Manufacturing Innovation 9(1):16-30. https://doi.org/10.1007/s40192-020-00169-1 — 피인용 108회
  10. NIST. (2018). CHAL-AMB2018-02-AMMT-MP: melt pool width and depth (AM Bench 2018). National Institute of Standards and Technology. https://www.nist.gov/ambench/chal-amb2018-02-mp-xsection
  11. Knapp G, Coleman J, Rolchigo M, Stoyanov M, Plotkowski A. (2023). Calibrating uncertain parameters in melt pool simulations of additive manufacturing. Computational Materials Science 218:111904. https://doi.org/10.1016/j.commatsci.2022.111904 — 피인용 39회
  12. Trapp J, Rubenchik AM, Guss G, Matthews MJ. (2017). In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing. Applied Materials Today 9:341-349. https://doi.org/10.1016/j.apmt.2017.08.006 — 피인용 501회
  13. Cunningham R, Zhao C, Parab N, Kantzos C, Pauza J, Fezzaa K, et al. (2019). Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging. Science 363(6429):849-852. https://doi.org/10.1126/science.aav4687 — 피인용 1,064회
  14. Khairallah SA, Anderson AT, Rubenchik A, King WE. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — 피인용 2,757회
  15. Coleman J, Kincaid K, Knapp GL, Stump B, Reeve ST, Rolchigo M, et al. (2025). AdditiveFOAM: A Continuum Multiphysics Code for Additive Manufacturing. Journal of Open Source Software 10(109):7770. https://doi.org/10.21105/joss.07770 — 피인용 6회

장 18 — 실습 5 — 공개 데이터셋과 데이터 누수 없는 ML 기준선​

  1. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — 피인용 1,649회
  2. Roberts DR, Bahn V, Ciuti S, Boyce MS, Elith J, Guillera‐Arroita G, et al. (2017). Cross‐validation strategies for data with temporal, spatial, hierarchical, or phylogenetic structure. Ecography 40(8):913-929. https://doi.org/10.1111/ecog.02881 — 피인용 4,096회
  3. scikit-learn developers. Cross-validation: evaluating estimator performance (version 1.9, includes LeaveOneGroupOut). scikit-learn 1.9 documentation. https://scikit-learn.org/1.9/modules/cross_validation.html
  4. Weaver J, Williams M, Ricker RE, Deisenroth D, Mekhontsev S, Young S, Lane B, Levine L. (2022). AM Bench 2022 Measurement Results Data: Optical Microscopy of Laser-scanned Single Tracks and Pads (AMB2022-03), Version 1.0.0. National Institute of Standards and Technology (NIST Public Data Repository). https://doi.org/10.18434/mds2-2718
  5. NIST. NIST licensing and data-citation statements (open data licence). National Institute of Standards and Technology. https://www.nist.gov/open/license
  6. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — 피인용 11회
  7. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회
  8. scikit-learn developers. Gaussian Processes (version 1.9). scikit-learn 1.9 documentation. https://scikit-learn.org/1.9/modules/gaussian_process.html
  9. King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW, Hahn DE, et al. (2014). Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. Journal of Materials Processing Technology 214(12):2915-2925. https://doi.org/10.1016/j.jmatprotec.2014.06.005 — 피인용 1,620회

장 19 — 연구 시작 키트: 읽기에서 첫 기여까지​

  1. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — 피인용 1,649회
  2. Crossref. REST API documentation. Crossref. https://www.crossref.org/documentation/retrieve-metadata/rest-api/
  3. OpenAlex. OpenAlex technical documentation. OurResearch. https://docs.openalex.org/
  4. Allen Institute for AI. Semantic Scholar Academic Graph API. Semantic Scholar. https://api.semanticscholar.org/api-docs/
  5. DebRoy T, Wei H, Zuback J, Mukherjee T, Elmer J, Milewski J, et al. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — 피인용 8,836회
  6. Huang Y, Fleming TG, Clark SJ, Marussi S, Fezzaa K, Thiyagalingam J, et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13(1):1170. https://doi.org/10.1038/s41467-022-28694-x — 피인용 432회
  7. Waltman L. (2016). A review of the literature on citation impact indicators. Journal of Informetrics 10(2):365-391. https://doi.org/10.1016/j.joi.2016.02.007 — 피인용 1,168회
  8. Aksnes DW. (2003). A macro study of self-citation. Scientometrics 56(2):235-246. https://doi.org/10.1023/a:1021919228368 — 피인용 270회
  9. Roberts DR, Bahn V, Ciuti S, Boyce MS, Elith J, Guillera‐Arroita G, et al. (2017). Cross‐validation strategies for data with temporal, spatial, hierarchical, or phylogenetic structure. Ecography 40(8):913-929. https://doi.org/10.1111/ecog.02881 — 피인용 4,096회
  10. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회
  11. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — 피인용 11회
  12. NIST. Additive Manufacturing Benchmark Test Series (AM Bench). National Institute of Standards and Technology. https://www.nist.gov/ambench
  13. ASTM International. Committee F42 on Additive Manufacturing Technologies. ASTM International. https://www.astm.org/membership-participation/technical-committees/committee-f42
  14. ISO. ISO/TC 261 — Additive manufacturing. International Organization for Standardization. https://www.iso.org/committee/629086.html
  15. Solid Freeform Fabrication Symposium. Annual International Solid Freeform Fabrication Symposium (home page). https://www.sffsymposium.org/
  16. ASTM International Additive Manufacturing Center of Excellence. ASTM International Conference on Advanced Manufacturing 2025. https://amcoe.org/event/icam2025/
  17. Materials Data Facility. Publish, discover and access materials data. https://www.materialsdatafacility.org/
  18. NIST. Direct AM Bench Data Links and Referencing Guidance. National Institute of Standards and Technology. https://www.nist.gov/ambench/direct-am-bench-data-links-and-referencing-guidance
  19. Wilkinson MD, Dumontier M, Aalbersberg IJ, Appleton G, Axton M, Baak A, et al. (2016). The FAIR Guiding Principles for scientific data management and stewardship. Scientific Data 3(1):160018. https://doi.org/10.1038/sdata.2016.18 — 피인용 16,237회

장 20 — 솔직한 평가: 산업이 아직 하지 못하는 것​

  1. Levine L, Lane B, Becker C, Belak J, Carson R, Deisenroth D, et al. (2024). Outcomes and Conclusions from the 2022 AM Bench Measurements, Challenge Problems, Modeling Submissions, and Conference. Integrating Materials and Manufacturing Innovation 13(3):598-621. https://doi.org/10.1007/s40192-024-00372-4 — 피인용 15회
  2. Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — 피인용 20회
  3. Skylar-Scott MA, Mueller J, Visser CW, Lewis JA. (2019). Voxelated soft matter via multimaterial multinozzle 3D printing. Nature 575(7782):330-335. https://doi.org/10.1038/s41586-019-1736-8 — 피인용 1,032회
  4. Gardner L, Kyvelou P, Herbert G, Buchanan C. (2020). Testing and initial verification of the world's first metal 3D printed bridge. Journal of Constructional Steel Research 172:106233. https://doi.org/10.1016/j.jcsr.2020.106233 — 피인용 334회
  5. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  6. Lane B, Heigel J, Ricker R, Zhirnov I, Khromschenko V, Weaver J, et al. (2020). Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates. Integrating Materials and Manufacturing Innovation 9(1):16-30. https://doi.org/10.1007/s40192-020-00169-1 — 피인용 108회
  7. Knapp G, Coleman J, Rolchigo M, Stoyanov M, Plotkowski A. (2023). Calibrating uncertain parameters in melt pool simulations of additive manufacturing. Computational Materials Science 218:111904. https://doi.org/10.1016/j.commatsci.2022.111904 — 피인용 39회
  8. Weaver JS, Deisenroth D, Mekhontsev S, Lane BM, Levine LE, Yeung H. (2024). Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges. Integrating Materials and Manufacturing Innovation 13(2):363-379. https://doi.org/10.1007/s40192-024-00355-5 — 피인용 11회
  9. Kapoor S, Narayanan A. (2023). Leakage and the reproducibility crisis in machine-learning-based science. Patterns 4(9):100804. https://doi.org/10.1016/j.patter.2023.100804 — 피인용 1,649회
  10. Wang P, Robertson G, Gibson BT, Fancher CM, Reynolds J, Borish M, et al. (2024). Improved Productivity with Multilaser Rotary Powder Bed Fusion Additive Manufacturing. 3D Printing and Additive Manufacturing 11(1):231-241. https://doi.org/10.1089/3dp.2022.0288 — 피인용 20회
  11. Snow Z, Scime L, Ziabari A, Fisher B, Paquit V. (2023). Scalable in situ non-destructive evaluation of additively manufactured components using process monitoring, sensor fusion, and machine learning. Additive Manufacturing 78:103817. https://doi.org/10.1016/j.addma.2023.103817 — 피인용 25회
  12. NIST. (created 2018, updated 2025). Additive Manufacturing Part Qualification (project page). National Institute of Standards and Technology. https://www.nist.gov/programs-projects/additive-manufacturing-part-qualification
  13. Li S, Aggour KS, Lu Y, Coutts P, Harris B, Kitt A, et al. (2023). Enabling FAIR data in additive manufacturing to accelerate industrialization. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.500-1 — 피인용 5회
  14. Witherell P, Frazier W. (2024). Empowering small and medium-sized enterprises through effective additive manufacturing data management. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ams.100-59 — 피인용 2회
  15. Ren Z, Gao L, Clark SJ, Fezzaa K, Shevchenko P, Choi A, et al. (2023). Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science 379(6627):89-94. https://doi.org/10.1126/science.add4667 — 피인용 337회
  16. Yeung H. (2025). Toward real-time feedback control for powder bed fusion additive manufacturing. Additive Manufacturing 114:105041. https://doi.org/10.1016/j.addma.2025.105041 — 피인용 3회
  17. Fox J, Kim F, Lane B, Praniewicz M, Tondare V, Weaver J, et al. (2024). In-process monitoring and non-destructive evaluation for metal additive manufacturing processes. National Institute of Standards and Technology (U.S.). https://doi.org/10.6028/nist.ir.8538 — 피인용 5회
  18. Sanaei N, Fatemi A. (2021). Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review. Progress in Materials Science 117:100724. https://doi.org/10.1016/j.pmatsci.2020.100724 — 피인용 1,006회
  19. Karaş B, Shokrani A. (2025). Activity-based costing of laser powder-bed additive manufacturing incorporating discrete event simulation. npj Advanced Manufacturing 2(1):24. https://doi.org/10.1038/s44334-025-00036-x — 피인용 3회
  20. GE Aerospace. (2018-10-04). Manufacturing Milestone: 30,000 Additive Fuel Nozzles. GE Aerospace News. https://www.geaerospace.com/news/articles/manufacturing/manufacturing-milestone-30000-additive-fuel-nozzles
  21. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM. (2017). 3D printing of high-strength aluminium alloys. Nature 549(7672):365-369. https://doi.org/10.1038/nature23894 — 피인용 2,956회
  22. Smith TM, Kantzos CA, Zarkevich NA, Harder BJ, Heczko M, Gradl PR, et al. (2023). A 3D printable alloy designed for extreme environments. Nature 617(7961):513-518. https://doi.org/10.1038/s41586-023-05893-0 — 피인용 280회
  23. Raphael B, Senthilnathan S, Patel A, Bhat S. (2023). A review of concrete 3D printed structural members. Frontiers in Built Environment 8:1034020. https://doi.org/10.3389/fbuil.2022.1034020 — 피인용 61회
  24. ISO/ASTM 52939:2023 — Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements. ISO/ASTM. https://www.iso.org/standard/81177.html
  25. International Code Council. (2026). Advancing the Future of Construction: A New Standard for 3D Printed Wall Systems (ICC 1150, Standard for Automated Construction Technology for 3D Printing Walls; Building Safety Journal, 26 August 2026). https://www.iccsafe.org/building-safety-journal/bsj-technical/advancing-the-future-of-construction-a-new-standard-for-3d-printed-wall-systems/
  26. Kellens K, Baumers M, Gutowski TG, Flanagan W, Lifset R, Duflou JR. (2017). Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications. Journal of Industrial Ecology 21(S1). https://doi.org/10.1111/jiec.12629 — 피인용 300회
  27. Faludi J, Baumers M, Maskery I, Hague R. (2016). Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate?. Journal of Industrial Ecology 21(S1). https://doi.org/10.1111/jiec.12528 — 피인용 174회
  28. Golisano Institute for Sustainability, Rochester Institute of Technology. (2023, 17 February). Life Cycle Assessment (LCA) Report: Comparative LCA of a Low-Pressure Turbine (LPT) Bracket by Two Manufacturing Methods — Final Report. Prepared for AMGTA. https://amgta.org/wp-content/uploads/2023/03/AMGTA_LCA_Final_Report_20230301.pdf
  29. Murphy SV, De Coppi P, Atala A. (2019). Opportunities and challenges of translational 3D bioprinting. Nature Biomedical Engineering 4(4):370-380. https://doi.org/10.1038/s41551-019-0471-7 — 피인용 530회
  30. Align Technology. (2026). Form 10-K for the fiscal year ended 31 December 2025. U.S. Securities and Exchange Commission (company filing; statements about Align's own process and products). https://www.sec.gov/Archives/edgar/data/1097149/000109714926000026/algn-20251231x10kasfiled.pdf
  31. NASA. (2021). NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems (baseline approved 2021-04-21). https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  32. FAA. (2023). Advisory Circular AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts (dated 2023-06-23). Federal Aviation Administration. https://www.faa.gov/regulations_policies/advisory_circulars/index.cfm/go/document.information/documentID/1041938