참고문헌
📍 현재 위치: 적층제조 공정·재료·설계의 근거 자료를 한곳에 모았습니다.
이 책의 모든 본문 인용(대괄호 번호, 예: [1])은 장별로 묶인 이 페이지로 연결됩니다. 번호는 장마다 1부터 다시 시작하며 해당 장의 [N] 표시와 일치합니다. 항목은 모든 언어판에서 동일합니다. '피인용' 횟수는 Crossref 기준(빌드 시점)이며 DOI가 있는 항목에만 표시됩니다. 표준, 공식 문서, 소스 저장소에는 횟수가 없습니다.
장 1 — 머리말 — 적층제조 공정·재료·설계
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — 피인용 2,269회
- Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — 피인용 3,679회
장 2 — 재료 압출(FFF/FDM)
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Turner BN, Strong R, Gold SA. (2014). A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyping Journal 20(3):192-204. https://doi.org/10.1108/RPJ-01-2013-0012 — 피인용 1,329회
- Sun Q, Rizvi GM, Bellehumeur CT, Gu P. (2008). Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid Prototyping Journal 14(2):72-80. https://doi.org/10.1108/13552540810862028 — 피인용 1,207회
- Ahn S-H, Montero M, Odell D, Roundy S, Wright PK. (2002). Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyping Journal 8(4):248-257. https://doi.org/10.1108/13552540210441166 — 피인용 2,165회
- Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — 피인용 3,679회
- Vaes D, Van Puyvelde P. (2021). Semi-crystalline feedstock for filament-based 3D printing of polymers. Progress in Polymer Science 118:101411. https://doi.org/10.1016/j.progpolymsci.2021.101411 — 피인용 229회
- Zanjanijam AR, Major I, Lyons JG, Lafont U, Devine DM. (2020). Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships. Polymers 12(8):1665. https://doi.org/10.3390/polym12081665 — 피인용 232회
- Zhuo P, Li S, Ashcroft IA, Jones AI. (2021). Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook. Composites Part B: Engineering 224:109143. https://doi.org/10.1016/j.compositesb.2021.109143 — 피인용 278회
장 3 — 광경화(SLA, DLP, LCD)
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — 피인용 3,679회
- Bagheri A, Jin J. (2019). Photopolymerization in 3D Printing. ACS Applied Polymer Materials 1(4):593-611. https://doi.org/10.1021/acsapm.8b00165 — 피인용 1,466회
- Lee JH, Prud'homme RK, Aksay IA. (2001). Cure depth in photopolymerization: Experiments and theory. Journal of Materials Research 16(12):3536-3544. https://doi.org/10.1557/jmr.2001.0485 — 피인용 295회
- Kolibaba TJ, Killgore JP, Caplins BW, Higgins CI, Arp U, Miller CC, et al. (2024). Results of an interlaboratory study on the working curve in vat photopolymerization. Additive Manufacturing 84:104082. https://doi.org/10.1016/j.addma.2024.104082 — 피인용 30회
- Pagac M, Hajnys J, Ma QP, Jancar L, Jansa J, Stefek P, et al. (2021). A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing. Polymers 13(4):598. https://doi.org/10.3390/polym13040598 — 피인용 826회
- Tumbleston JR, Shirvanyants D, Ermoshkin N, Janusziewicz R, Johnson AR, Kelly D, et al. (2015). Continuous liquid interface production of 3D objects. Science 347(6228):1349-1352. https://doi.org/10.1126/science.aaa2397 — 피인용 2,203회
장 4 — 폴리머 분말 베드 융합(SLS, MJF)
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Kruth J, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M. (2005). Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping Journal 11(1):26-36. https://doi.org/10.1108/13552540510573365 — 피인용 1,211회
- Cai C, Tey WS, Chen J, Zhu W, Liu X, Liu T, et al. (2021). Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion. Journal of Materials Processing Technology 288:116882. https://doi.org/10.1016/j.jmatprotec.2020.116882 — 피인용 261회
- Schmid M, Amado A, Wegener K. (2014). Materials perspective of polymers for additive manufacturing with selective laser sintering. Journal of Materials Research 29(17):1824-1832. https://doi.org/10.1557/jmr.2014.138 — 피인용 245회
- Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — 피인용 3,679회
- Goodridge R, Tuck C, Hague R. (2012). Laser sintering of polyamides and other polymers. Progress in Materials Science 57(2):229-267. https://doi.org/10.1016/j.pmatsci.2011.04.001 — 피인용 798회
- Han W, Kong L, Xu M. (2022). Advances in selective laser sintering of polymers. International Journal of Extreme Manufacturing 4(4):042002. https://doi.org/10.1088/2631-7990/ac9096 — 피인용 254회
장 5 — 재료 분사와 바인더 분사
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Derby B. (2010). Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution. Annual Review of Materials Research 40:395-414. https://doi.org/10.1146/annurev-matsci-070909-104502 — 피인용 1,924회
- Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — 피인용 3,679회
- Gülcan O, Günaydın K, Tamer A. (2021). The State of the Art of Material Jetting—A Critical Review. Polymers 13(16):2829. https://doi.org/10.3390/polym13162829 — 피인용 294회
- Ziaee M, Crane NB. (2019). Binder jetting: A review of process, materials, and methods. Additive Manufacturing 28:781-801. https://doi.org/10.1016/j.addma.2019.05.031 — 피인용 415회
- Sivarupan T, Balasubramani N, Saxena P, Nagarajan D, El Mansori M, Salonitis K, et al. (2021). A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting. Additive Manufacturing 40:101889. https://doi.org/10.1016/j.addma.2021.101889 — 피인용 68회
- Mostafaei A, Elliott AM, Barnes JE, Li F, Tan W, Cramer CL, Nandwana P, Chmielus M. (2021). Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Progress in Materials Science 119:100707. https://doi.org/10.1016/j.pmatsci.2020.100707 — 피인용 1,079회
장 6 — 레이저 분말 베드 융합(PBF-LB/M)
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Herzog D, Seyda V, Wycisk E, Emmelmann C. (2016). Additive manufacturing of metals. Acta Materialia 117:371-392. https://doi.org/10.1016/j.actamat.2016.07.019 — 피인용 4,726회
- DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — 피인용 8,836회
- Khairallah SA, Anderson AT, Rubenchik A, King WE. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — 피인용 2,757회
- Huang Y, Fleming TG, Clark SJ, Marussi S, Fezzaa K, Thiyagalingam J, et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13(1):1170. https://doi.org/10.1038/s41467-022-28694-x — 피인용 432회
- Bertoli US, Wolfer AJ, Matthews MJ, Delplanque J-PR, Schoenung JM. (2017). On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting. Materials & Design 113:331-340. https://doi.org/10.1016/j.matdes.2016.10.037 — 피인용 788회
- Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL. (2015). Review of selective laser melting: Materials and applications. Applied Physics Reviews 2(4):041101. https://doi.org/10.1063/1.4935926 — 피인용 2,197회
- ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html
장 7 — 전자빔 용융과 직접 에너지 적층
- Körner C. (2016). Additive manufacturing of metallic components by selective electron beam melting — a review. International Materials Reviews 61(5):361-377. https://doi.org/10.1080/09506608.2016.1176289 — 피인용 1,088회
- Fu Z, Körner C. (2022). Actual state-of-the-art of electron beam powder bed fusion. European Journal of Materials 2(1):54-116. https://doi.org/10.1080/26889277.2022.2040342 — 피인용 143회
- Svetlizky D, Das M, Zheng B, Vyatskikh AL, Bose S, Bandyopadhyay A, et al. (2021). Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today 49:271-295. https://doi.org/10.1016/j.mattod.2021.03.020 — 피인용 1,431회
- Gu DD, Meiners W, Wissenbach K, Poprawe R. (2012). Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Reviews 57(3):133-164. https://doi.org/10.1179/1743280411y.0000000014 — 피인용 3,081회
- Ahn DG. (2021). Directed Energy Deposition (DED) Process: State of the Art. International Journal of Precision Engineering and Manufacturing-Green Technology 8(2):703-742. https://doi.org/10.1007/s40684-020-00302-7 — 피인용 821회
- Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P. (2016). Wire + Arc Additive Manufacturing. Materials Science and Technology 32(7):641-647. https://doi.org/10.1179/1743284715y.0000000073 — 피인용 1,770회
- Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, et al. (2018). A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. Journal of Manufacturing Processes 35:127-139. https://doi.org/10.1016/j.jmapro.2018.08.001 — 피인용 1,557회
- Yin S, Cavaliere P, Aldwell B, Jenkins R, Liao H, Li W, et al. (2018). Cold spray additive manufacturing and repair: Fundamentals and applications. Additive Manufacturing 21:628-650. https://doi.org/10.1016/j.addma.2018.04.017 — 피인용 259회
장 8 — 금속 바인더 분사와 프린트-소결 방식
- Gonzalez-Gutierrez J, Cano S, Schuschnigg S, Kukla C, Sapkota J, Holzer C. (2018). Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives. Materials 11(5):840. https://doi.org/10.3390/ma11050840 — 피인용 689회
- Li M, Du W, Elwany A, Pei Z, Ma C. (2020). Metal Binder Jetting Additive Manufacturing: A Literature Review. Journal of Manufacturing Science and Engineering 142(9):090801. https://doi.org/10.1115/1.4047430 — 피인용 320회
- Suwanpreecha C, Manonukul A. (2022). A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding. Metals 12(3):429. https://doi.org/10.3390/met12030429 — 피인용 247회
- Mostafaei A, Elliott AM, Barnes JE, Li F, Tan W, Cramer CL, et al. (2021). Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Progress in Materials Science 119:100707. https://doi.org/10.1016/j.pmatsci.2020.100707 — 피인용 1,079회
- Sadeghi Borujeni S, Shad A, Abburi Venkata K, Günther N, Ploshikhin V. (2022). Numerical simulation of shrinkage and deformation during sintering in metal binder jetting with experimental validation. Materials & Design 216:110490. https://doi.org/10.1016/j.matdes.2022.110490 — 피인용 61회
- Ziaee M, Crane NB. (2019). Binder jetting: A review of process, materials, and methods. Additive Manufacturing 28:781-801. https://doi.org/10.1016/j.addma.2019.05.031 — 피인용 415회
장 9 — 세라믹, 복합재 및 기타 재료군
- Chen Z, Li Z, Li J, Liu C, Lao C, Fu Y, et al. (2019). 3D printing of ceramics: A review. Journal of the European Ceramic Society 39(4):661-687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013 — 피인용 2,073회
- Halloran JW. (2016). Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization. Annual Review of Materials Research 46(1):19-40. https://doi.org/10.1146/annurev-matsci-070115-031841
- Zhang K, Meng Q, Qu Z, He R. (2024). A review of defects in vat photopolymerization additive-manufactured ceramics: Characterization, control, and challenges. Journal of the European Ceramic Society 44(3):1361-1384. https://doi.org/10.1016/j.jeurceramsoc.2023.10.067 — 피인용 151회
- Du W, Ren X, Pei Z, Ma C. (2020). Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density. Journal of Manufacturing Science and Engineering 142(4):040801. https://doi.org/10.1115/1.4046248 — 피인용 175회
- Lewis JA, Smay JE, Stuecker J, Cesarano J. (2006). Direct Ink Writing of Three‐Dimensional Ceramic Structures. Journal of the American Ceramic Society 89(12):3599-3609. https://doi.org/10.1111/j.1551-2916.2006.01382.x — 피인용 772회
- Jamal MA, Shah OR, Ghafoor U, Qureshi Y, Bhutta MR. (2024). Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review. Polymers 16(12):1622. https://doi.org/10.3390/polym16121622 — 피인용 101회
- Li N, Li Y, Liu S. (2016). Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. Journal of Materials Processing Technology 238:218-225. https://doi.org/10.1016/j.jmatprotec.2016.07.025 — 피인용 681회
- Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — 피인용 1,453회
- Hehr A, Norfolk M, Wenning J, Sheridan J, Leser P, Leser P, et al. (2017). Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing. JOM 70(3):315-320. https://doi.org/10.1007/s11837-017-2709-8 — 피인용 59회
- Buswell R, Leal de Silva W, Jones S, Dirrenberger J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research 112:37-49. https://doi.org/10.1016/j.cemconres.2018.05.006 — 피인용 1,574회
- Paolini A, Kollmannsberger S, Rank E. (2019). Additive manufacturing in construction: A review on processes, applications, and digital planning methods. Additive Manufacturing 30:100894. https://doi.org/10.1016/j.addma.2019.100894 — 피인용 307회
장 10 — 적층제조 설계(DfAM)
- Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — 피인용 1,821회
- ISO/ASTM 52910:2018 — Additive manufacturing — Design — Requirements, guidelines and recommendations. ISO/ASTM. https://www.iso.org/standard/67289.html
- Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — 피인용 20회
- Kranz J, Herzog D, Emmelmann C. (2014). Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. Journal of Laser Applications 27(S1):S14001. https://doi.org/10.2351/1.4885235 — 피인용 438회
- Jiang J, Xu X, Stringer J. (2018). Support Structures for Additive Manufacturing: A Review. Journal of Manufacturing and Materials Processing 2(4):64. https://doi.org/10.3390/jmmp2040064 — 피인용 342회
- Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — 피인용 1,453회
- Vaneker T, Bernard A, Moroni G, Gibson I, Zhang Y. (2020). Design for additive manufacturing: Framework and methodology. CIRP Annals 69(2):578-599. https://doi.org/10.1016/j.cirp.2020.05.006 — 피인용 271회
장 11 — 위상 최적화와 격자 구조
- Bendsøe MP. (1989). Optimal shape design as a material distribution problem. Structural Optimization 1(4):193-202. https://doi.org/10.1007/bf01650949 — 피인용 4,013회
- Sigmund O. (2001). A 99 line topology optimization code written in Matlab. Structural and Multidisciplinary Optimization 21(2):120-127. https://doi.org/10.1007/s001580050176 — 피인용 2,427회
- Liu K, Tovar A. (2014). An efficient 3D topology optimization code written in Matlab. Structural and Multidisciplinary Optimization 50(6):1175-1196. https://doi.org/10.1007/s00158-014-1107-x — 피인용 602회
- Sigmund O, Maute K. (2013). Topology optimization approaches. Structural and Multidisciplinary Optimization 48(6):1031-1055. https://doi.org/10.1007/s00158-013-0978-6 — 피인용 2,818회
- Liu J, Gaynor AT, Chen S, Kang Z, Suresh K, Takezawa A, et al. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization 57(6):2457-2483. https://doi.org/10.1007/s00158-018-1994-3 — 피인용 816회
- Plocher J, Panesar A. (2019). Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures. Materials & Design 183:108164. https://doi.org/10.1016/j.matdes.2019.108164 — 피인용 651회
- Langelaar M. (2016). Topology optimization of 3D self-supporting structures for additive manufacturing. Additive Manufacturing 12:60-70. https://doi.org/10.1016/j.addma.2016.06.010 — 피인용 221회
- Maconachie T, Leary M, Lozanovski B, Zhang X, Qian M, Faruque O, et al. (2019). SLM lattice structures: Properties, performance, applications and challenges. Materials & Design 183:108137. https://doi.org/10.1016/j.matdes.2019.108137 — 피인용 1,448회
- Feng J, Fu J, Yao X, He Y. (2022). Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications. International Journal of Extreme Manufacturing 4(2):022001. https://doi.org/10.1088/2631-7990/ac5be6 — 피인용 760회
- Li J, Wang L, He X, Liang J, Dong C. (2025). Additively manufactured metallic TPMS lattice structures: design strategies, fabrication, multifunctional properties, and applications. npj Advanced Manufacturing 2(1):45. https://doi.org/10.1038/s44334-025-00057-6 — 피인용 90회
- Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — 피인용 1,821회
장 12 — 방향, 서포트, 빌드 준비
- Jiang J, Xu X, Stringer J. (2018). Support Structures for Additive Manufacturing: A Review. Journal of Manufacturing and Materials Processing 2(4):64. https://doi.org/10.3390/jmmp2040064 — 피인용 342회
- Xie D, Lv F, Yang Y, Shen L, Tian Z, Shuai C, et al. (2022). A Review on Distortion and Residual Stress in Additive Manufacturing. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1(3):100039. https://doi.org/10.1016/j.cjmeam.2022.100039 — 피인용 63회
- Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — 피인용 1,453회
- Mercelis P, Kruth J. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal 12(5):254-265. https://doi.org/10.1108/13552540610707013 — 피인용 1,908회
- Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — 피인용 259회
- Calignano F. (2014). Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Materials & Design 64:203-213. https://doi.org/10.1016/j.matdes.2014.07.043 — 피인용 468회
- Hussein A, Hao L, Yan C, Everson R, Young P. (2013). Advanced lattice support structures for metal additive manufacturing. Journal of Materials Processing Technology 213(7):1019-1026. https://doi.org/10.1016/j.jmatprotec.2013.01.020 — 피인용 423회
- Xu S, Liu J, Sun Y, Li X, Ma Y. (2024). Support structure topology optimization considering the residual distortion for laser powder bed fusion metal additive manufacturing. Structural and Multidisciplinary Optimization 67(10):182. https://doi.org/10.1007/s00158-024-03883-y — 피인용 12회
- Miki T. (2023). Self-support topology optimization considering distortion for metal additive manufacturing. Computer Methods in Applied Mechanics and Engineering 404:115821. https://doi.org/10.1016/j.cma.2022.115821 — 피인용 39회
- Chen Q, Liang X, Hayduke D, Liu J, Cheng L, Oskin J, et al. (2019). An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering. Additive Manufacturing 28:406-418. https://doi.org/10.1016/j.addma.2019.05.021 — 피인용 107회
장 13 — 후처리
- Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — 피인용 259회
- Paraschiv A, Matache G, Vladut M. (2024). Assessment of Residual Stresses in Laser Powder Bed Fusion Manufactured IN 625. Materials 17(2):413. https://doi.org/10.3390/ma17020413 — 피인용 25회
- ASTM F3301-18a — Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion. ASTM International. https://store.astm.org/f3301-18a.html
- Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. (2016). The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47(5):1939-1946. https://doi.org/10.1007/s11661-016-3429-3
- Maleki E, Bagherifard S, Bandini M, Guagliano M. (2021). Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities. Additive Manufacturing 37:101619. https://doi.org/10.1016/j.addma.2020.101619 — 피인용 225회
- Townsend A, Senin N, Blunt L, Leach R, Taylor J. (2016). Surface texture metrology for metal additive manufacturing: a review. Precision Engineering 46:34-47. https://doi.org/10.1016/j.precisioneng.2016.06.001 — 피인용 687회
- Masuo H, Tanaka Y, Morokoshi S, Yagura H, Uchida T, Yamamoto Y, et al. (2018). Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. International Journal of Fatigue 117:163-179. https://doi.org/10.1016/j.ijfatigue.2018.07.020
- du Plessis A, Yadroitsava I, Yadroitsev I. (2020). Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights. Materials & Design 187:108385. https://doi.org/10.1016/j.matdes.2019.108385 — 피인용 700회
- Srinivasan L, V E. (2026). Experimental investigation of hot chemical vapor smoothing parameters for enhanced surface quality control in SLS-fabricated PA12 parts. Rapid Prototyping Journal:1-14. https://doi.org/10.1108/rpj-12-2025-0678 — 피인용 5회
- D. S. Thomas, S. W. Gilbert. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://doi.org/10.6028/NIST.SP.1176 — 피인용 252회
- Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — 피인용 593회
장 14 — 품질, 검사, 비파괴 시험
- du Plessis A, Yadroitsev I, Yadroitsava I, Le Roux SG. (2018). X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications. 3D Printing and Additive Manufacturing 5(3):227-247. https://doi.org/10.1089/3dp.2018.0060 — 피인용 465회
- Tammas-Williams S, Zhao H, Léonard F, Derguti F, Todd I, Prangnell P. (2015). XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting. Materials Characterization 102:47-61. https://doi.org/10.1016/j.matchar.2015.02.008 — 피인용 577회
- Townsend A, Senin N, Blunt L, Leach R, Taylor J. (2016). Surface texture metrology for metal additive manufacturing: a review. Precision Engineering 46:34-47. https://doi.org/10.1016/j.precisioneng.2016.06.001 — 피인용 687회
- du Plessis A, Yadroitsava I, Yadroitsev I. (2020). Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights. Materials & Design 187:108385. https://doi.org/10.1016/j.matdes.2019.108385 — 피인용 700회
- ISO/ASTM 52902:2023 — Additive manufacturing — Test artefacts — Geometric capability assessment of additive manufacturing systems. ISO/ASTM. https://www.iso.org/standard/79683.html
- ASTM B962 — Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle. ASTM International. https://store.astm.org/standards/b962
- Slotwinski JA, Garboczi EJ, Hebenstreit KM. (2014). Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control. Journal of Research of the National Institute of Standards and Technology 119:494. https://doi.org/10.6028/jres.119.019 — 피인용 385회
- Thompson A, Maskery I, Leach RK. (2016). X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology 27(7):072001. https://doi.org/10.1088/0957-0233/27/7/072001 — 피인용 485회
- ASTM E3166-20e1 — Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build. ASTM International. https://store.astm.org/e3166-20e01.html
- Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. (2016). The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47(5):1939-1946. https://doi.org/10.1007/s11661-016-3429-3
- NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems. NASA. https://standards.nasa.gov/standard/NASA/NASA-STD-6030
- ISO/ASTM 52909:2024 — Additive manufacturing of metals — Finished part properties — Orientation and location dependence of mechanical properties for metal parts. ISO/ASTM. https://www.iso.org/standard/87956.html
- Kok Y, Tan X, Wang P, Nai M, Loh N, Liu E, et al. (2018). Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design 139:565-586. https://doi.org/10.1016/j.matdes.2017.11.021 — 피인용 1,443회
장 15 — 표준, 적격성 평가, 인증
- ISO/TC 261 — Additive manufacturing (committee page and business plan describing the ISO-ASTM partnership and joint development). ISO. https://www.iso.org/committee/629086.html
- Seifi M, Salem A, Beuth J, Harrysson O, Lewandowski JJ. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM 68(3):747-764. https://doi.org/10.1007/s11837-015-1810-0 — 피인용 570회
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html
- ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
- ISO/ASTM TS 52930:2021 — Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment. ISO/ASTM. https://www.iso.org/standard/79527.html
- ISO/ASTM 52941:2026 — Additive manufacturing for aerospace — System performance and reliability tests for laser metal powder-bed fusion machines for metallic materials (2020 edition: Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application). ISO/ASTM. https://www.iso.org/standard/86784.html
- ASTM F2924-14(2021) — Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion. ASTM International. https://store.astm.org/standards/f2924
- NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems. NASA. https://standards.nasa.gov/standard/NASA/NASA-STD-6030
- EASA. CM-S-008 Issue 04 — Certification Memorandum: Additive Manufacturing. https://www.easa.europa.eu/en/downloads/142437/en
- FAA. (2023). AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts. https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC_33.15-3.pdf
- FDA. (2017). Technical Considerations for Additive Manufactured Medical Devices — Guidance for Industry and Food and Drug Administration Staff. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/technical-considerations-additive-manufactured-medical-devices
장 16 — 공정 선택 가이드
- ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
- Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, et al. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — 피인용 2,269회
- Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering 143:172-196. https://doi.org/10.1016/j.compositesb.2018.02.012 — 피인용 8,080회
- Maleki E, Bagherifard S, Bandini M, Guagliano M. (2021). Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities. Additive Manufacturing 37:101619. https://doi.org/10.1016/j.addma.2020.101619 — 피인용 225회
- D. S. Thomas, S. W. Gilbert. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://doi.org/10.6028/NIST.SP.1176 — 피인용 252회
- Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — 피인용 593회
- ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
- ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html