Materials at a glance
📍 Where we are: Part 1 · How It Works — Chapter 5 of 11. Chapter 4 sorted the machines into seven families. Now we look at what goes into them: the materials, and the physical form each machine needs them in.
Think of a kitchen. A cook can make food from spaghetti, a bag of flour, a bottle of oil, or a sheet of pastry, but each ingredient suits a different recipe, and you cannot knead spaghetti. AM machines are the same. A nozzle machine wants a string of plastic, a resin machine wants a liquid, a laser machine wants a fine powder. Two things decide what you can make: the kind of material (plastic, metal, ceramic) and the form it comes in (string, liquid, powder, wire, sheet).
What this chapter covers
We tour the main material families (polymers, metals, ceramics, composites and a few specialty materials), explain the five common forms of feedstock, and finish with a table showing which of the seven process categories takes which. This is a beginner's map; Book 2 goes into properties and processing in detail. Where a material name is given, it is an example, not a complete list.
Two questions: what kind, and what form?
Feedstock is the raw material fed into an AM machine [1]. Its form matters as much as its chemistry, because each process category (Chapter 4) is built around one way of handling material. The five forms you will hear most often:
| Form | What it is | Typical process |
|---|---|---|
| Filament | A thin plastic string wound on a spool (pellets, small beads of plastic, are an alternative) | Material extrusion |
| Liquid resin | A liquid plastic that hardens under light | Vat photopolymerization, material jetting |
| Powder | Grains too fine to see individually, often tens of micrometers across | Powder bed fusion, binder jetting, some directed energy deposition |
| Wire | Metal wire, like welding wire | Directed energy deposition |
| Sheet | Flat sheets or foils of paper, plastic film or metal | Sheet lamination |
A micrometer (µm) is a thousandth of a millimeter, so the grains of metal powder in laser powder bed fusion are typically tens of micrometers across; NIST's measurements of two powders used in laser powder bed fusion show particle sizes from a few micrometers to several tens of micrometers [2]. The same alloy can be supplied in several forms, for example as powder for powder bed fusion or as wire for directed energy deposition [3].
Polymers: plastics
A polymer is a material made of long chain-like molecules; everyday plastics are polymers. Two big types matter in AM [4], [5]:
- Thermoplastics soften when heated and harden when cooled, and can be melted again. In AM they come as filament or powder. Examples: PLA, ABS, PETG and nylon (PA11, PA12). PLA is a common beginner's filament, nylon powder is a common choice for laser sintering.
- Photopolymers are liquid resins that harden under light by polymerization (Chapter 4). Once cured they do not melt again on heating. Photopolymer formulations vary widely in stiffness and function [5]. Material jetting also uses photopolymer resin, and wax as well [1].
Polymers are generally the easiest and cheapest materials to print, which is one reason they are common in hobby and education use.
Metals
Metals used in AM are usually alloys, mixtures of a metal with other elements to get useful properties. Typical examples in the metals reviews include stainless steels (316L, 17-4PH), the titanium alloy Ti-6Al-4V, nickel superalloys (Inconel 625 and 718), aluminum (AlSi10Mg) and cobalt-chrome [6], [3]. Most arrive as powder, but wire is common for directed energy deposition [3]; bound-metal filament, a metal powder held in a polymer binder, is used in material extrusion [7].
The standard defines several metal-friendly processes: powder bed fusion (laser or electron beam), directed energy deposition (laser, electron beam or plasma arc), and binder jetting [1]. Metals need extra care: powders must be handled safely (Chapter 10), and parts often need heat treatment and machining after printing.
Ceramics
Ceramics are hard, heat-resistant, non-metallic materials such as alumina, zirconia and silicon carbide [8]. They are brittle, so printing them is a two-step route: first the part is shaped from ceramic powder held together by a binder or resin, giving a fragile "green" part; then it is heated to burn the binder out (debinding) and to bond the grains into a solid (sintering). The part shrinks during this, so the design is enlarged to compensate [8]. The standard calls such a route a multi-step process, one where the first step gives the basic shape and a later one gives the final material properties [1]. Binder jetting and vat photopolymerization with ceramic-filled resin are routes used to shape ceramics.
Composites
A composite combines two materials to get properties neither has alone, such as plastic reinforced with short fibers of glass or carbon. Fiber-reinforced polymers are a major research topic in AM [9], and review articles cover polymer composites among the materials of AM [4]. Metal-polymer filament and ceramic-filled resin (above) are also, in a loose sense, composites during the printing step.
Specialty materials: concrete and living cells
Two unusual examples show how flexible "material extrusion" can be.
- Concrete. Researchers have studied printing buildings by extruding cement-based mixtures through a nozzle in layers. A research roadmap on the topic discusses the technology and the open problems [10], and reviews of AM list construction among its application areas [4]. The standard does not name concrete printing as a separate category; it fits under material extrusion.
- Bio-inks. In bioprinting, a bio-ink is described as a hydrogel-type biomaterial, or a blend of materials, that usually carries living cells and is used to build tissue-like structures, then stabilized by cross-linking so it holds its shape [11]. A hydrogel is a water-rich, jelly-like material. This area is mainly research.
Which process takes which material?
The table summarizes the pattern. It is a guide, not a rule: manufacturers keep widening what their machines can process [7].
| Process category | Typical feedstock form | Main materials |
|---|---|---|
| Material extrusion | Filament, pellets, pastes | Thermoplastics; polymer-bound metal or ceramic; cement-based pastes; bio-inks |
| Vat photopolymerization | Liquid resin | Photopolymers, including ceramic-filled resin |
| Powder bed fusion | Powder | Polymers (nylons) and metals |
| Material jetting | Droplets | Photopolymer resin, wax |
| Binder jetting | Powder plus liquid binder | Metals, ceramics, sand; the original MIT patent also mentions plastic powder [12] |
| Directed energy deposition | Wire or powder | Metals |
| Sheet lamination | Sheets, foils | Paper, polymer film, metal foil |
Which feedstock form and which material families (polymers, metals, ceramics) each of the seven process categories typically takes; the asterisk marks polymer-bound metal and ceramic-loaded filament, and ceramic-filled resin.
Original diagram by the authors, created with AI assistance.
Why it matters
The material choice drives nearly everything else: strength, heat resistance, appearance, cost, how safe the process is to run, and which machines you can use. A part that must survive heat or load may force you into metal and a more demanding process. A cheap visual prototype may be well served by a plastic filament. Choosing the material first and the process second, or the reverse, is a central design decision in AM.
In the real world
Many beginners start with PLA filament on a desktop extrusion machine. A dental laboratory may use light-cured resin. An aerospace supplier may use titanium or nickel alloy powder. Different materials call for different safety practice, which is why Chapter 10 treats resin, powders and fumes separately. When you read a datasheet for a printed material, look at three things: the family, the form and the process it was tested in, because the same chemical can behave differently depending on how it was printed.
Key terms
- Feedstock — the raw material fed into an AM machine.
- Filament — a thin plastic string, supplied on a spool, used in material extrusion.
- Powder — material in tiny grains, used in powder bed fusion, binder jetting and some directed energy deposition.
- Thermoplastic — a plastic that softens when heated and hardens when cooled, and can be re-melted.
- Photopolymer — a liquid resin that hardens under light.
- Alloy — a metal mixed with other elements to give useful properties.
- Ceramic — a hard, heat-resistant, non-metallic material, such as alumina.
- Sintering — heating a powder compact so its grains bond into a solid without fully melting.
- Composite — a combination of two materials, such as plastic reinforced with fibers.
- Bio-ink — a gel-like material that carries living cells for bioprinting.
- Micrometer (µm) — a thousandth of a millimeter.
Where this leads
Now that you know the machines, the digital chain and the materials, the next part asks what AM is actually good for: What AM is good at (and what it is not).