Laser powder bed fusion (PBF-LB/M)
📍 Where we are: Part II · Metal & Ceramic Processes — Chapter 5 of 15. Part I covered polymer processes; now the same powder-bed idea is applied to metal, where the laser fully melts each track and everything gets hotter, faster and less forgiving.
Think of welding, but with a pen-thin torch that draws a thousand tiny welds side by side on a bed of fine metal dust, each melting into the weld below it. The torch is a laser, the "weld" is a pool of molten metal about as wide as a hair, and the pool freezes within a fraction of a second. Build thousands of layers like this and you get a metal part. The challenge is that every weld is also a source of stress and possible flaws, so the whole process is about controlling many small welds at once.
What this chapter covers
We walk through the machine, then the controls (power, speed, spacing, layer thickness, scan strategy), why a popular "energy density" shortcut can mislead, the common alloys, and the practical matters: supports, build plate, inert gas and powder handling. In ISO/ASTM 52900 terms this is the powder bed fusion category [1], applied with a laser beam to metal and abbreviated PBF-LB/M; common names are selective laser melting (SLM), direct metal laser sintering (DMLS) and laser beam melting (LBM). Overview articles on the fundamentals of laser beam melting include [2]. Defects and physics at the melt-pool scale are left to Book 4.
Machine anatomy
A PBF-LB/M machine looks like the polymer machine of the previous chapter, with a stricter atmosphere and a more powerful beam:
- Laser and scanner. A fibre laser, with its beam steered by two fast galvanometer mirrors and focused to a small spot. Powder bed processes typically use beam diameters on the order of 50 to 100 µm and scan speeds on the order of 1 m/s, which makes feature sizes of about 100 µm achievable [3].
- Build chamber with inert gas. The chamber is filled with argon (nitrogen is used for some alloys) to protect the hot metal from oxygen; a gas flow across the bed carries away smoke and spatter. Laser AM methods often use inert shielding gas such as argon to prevent contamination of the molten pool [3].
- Recoater and powder supply. A blade or roller spreads a thin layer, typically tens of micrometres thick, from a powder reservoir across the bed.
- Build plate. A thick metal plate, often heated, on a platform that lowers by one layer each cycle. The part is welded to it; the plate anchors the part and conducts heat away.
- Optional extras. Pre-heating of the plate, oxygen sensors, and in-process monitoring cameras.
Each layer cycle is: lower plate, recoat, scan the slice (first the contour, then the interior), repeat.
Parameters and scan strategy
The process parameters are numerous. Table-style lists of PBF-LB parameters include beam power, energy density, spot size and focal offset, hatch spacing, scan speed, scan strategy, powder properties, layer thickness, build plate preheat and chamber gas [3]. The four that people quote most are:
| Parameter | Symbol | What it does |
|---|---|---|
| Laser power | P | How much energy per second enters the melt pool |
| Scan speed | v | How fast the beam moves; higher means less energy per length |
| Hatch spacing | h | Distance between neighbouring scan tracks; sets overlap |
| Layer thickness | t | Depth of the powder layer being melted |
The melt pool must be deep enough to remelt the layer below, or lack-of-fusion voids form between layers; with too much energy the pool turns unstable and traps gas, leaving round pores (a regime often called keyhole) [3]. Powder-scale simulation attributes pores, spatter and denudation zones to recoil pressure and Marangoni convection in the melt [4], and synchrotron X-ray imaging shows that keyhole porosity can start even in the "transition" regime, through fast fluctuations of the keyhole [5].
Scan strategy describes how the laser fills each layer: unidirectional or back-and-forth stripes, chessboard islands, and rotating the stripe direction by a set angle between layers so that residual stress and texture average out. A contour pass around the perimeter tends to control surface quality and the accuracy of the edge.
Volumetric energy density, and why it oversimplifies
Researchers often combine the four parameters into a single number, the volumetric energy density:
E = P / (v × h × t)
with units of joules per cubic millimetre [3]. It is attractive because it collapses four knobs into one. But the same E can be produced by very different combinations (a high-power fast scan, or a low-power slow scan) that make very different melt pools. A study of limitations of the measure concluded that volumetric energy density is a suitable design parameter only within a narrow range, because it cannot capture the complex physics of the melt pool [6]. Different lasers also absorb differently on different alloys, so energy densities cannot be compared directly across machines or materials without accounting for absorptivity [3]. Treat E as a rough bookkeeping label, and rely on tested parameter sets and process windows instead.
Materials
| Alloy | Family | Typical reason to choose it |
|---|---|---|
| 316L | Austenitic stainless steel | Corrosion resistance, ductility, easy to print |
| 17-4PH | Precipitation-hardening stainless steel | High strength after heat treatment |
| AlSi10Mg | Aluminium-silicon casting alloy | Lightweight, good printability |
| Ti-6Al-4V | Titanium alloy | High strength-to-weight, biocompatible |
| Inconel 718 (IN718) | Nickel superalloy | High-temperature strength |
These five are among the most commonly processed alloys; broad reviews of selective laser melting survey these and other materials and the applications they serve [7]. Not every alloy can be printed: some crack because of their solidification behaviour, so alloys are often modified for AM. Mechanical properties depend on the thermal history; as-built parts can differ from wrought material and are typically heat treated (for example thermal stress relief, solution treatment and ageing) [3].
Supports, the build plate and powder handling
- Supports and the plate. Metal parts are built on the plate and held down by supports that do two jobs: carry overhangs and, more important, conduct heat to the plate and resist distortion from residual stress. As the melt solidifies and cools it shrinks, and thermal stress builds up; supports and sensible orientation are the first defence against distortion [3]. The part is usually stress relieved while still on the plate and then cut off by wire EDM or saw.
- Surface roughness. Powder bed processes do not produce a surface finish better than about the mean powder particle size, because partly melted particles stick to the surface [3]. Critical surfaces are machined afterwards.
- Powder handling. Fine metal powder is a safety hazard (combustible dust, and reactive for some metals) and a quality variable. For critical applications, the standard ISO/ASTM 52904 requires that the maximum number of times used powder may be reused be validated, and that used powder is sieved to remove agglomerations [8]. Build records should track which powder lot went into each job.
A laser melts each slice of the part into the powder bed under inert gas, with supports tying the part to a heat-conducting build plate.
Original diagram by the authors, created with AI assistance.
Bracket check
Metal is where the bracket gets interesting. In Ti-6Al-4V or AlSi10Mg (illustrative choices) the plate-and-rib shape could be redesigned with thinner webs and lighter lattice-like features, as Part III will show. Orientation then trades supports against surface quality: standing the bracket up reduces footprint but adds a long thin section prone to distortion, and lying it down adds supports under the plate. The bolt holes would be printed undersized and finished by drilling or reaming, since printed holes and threads are rough. Count machining and inspection, not just print time, in the cost.
Why it matters
PBF-LB/M is the most widely used metal AM process, and it is the one that made lightweight, complex metal parts practical: lattices, internal channels, consolidated assemblies. It also sets the template for the rest of the field's quality problems: porosity, residual stress, anisotropy and qualification.
In the real world
Aerospace, medical implants, and tooling with conformal cooling channels are well-known uses. For critical applications, companies follow a standard such as ISO/ASTM 52904, which specifies operation and production control of metal powder bed fusion machines and processes [8]. Expect a "printed part" to be the start, not the end, of a workflow that includes heat treatment, machining and inspection.
Key terms
- PBF-LB/M — laser beam powder bed fusion of metals; also called SLM, DMLS or LBM.
- Melt pool — the small puddle of molten metal under the laser.
- Hatch spacing — distance between neighbouring laser tracks.
- Scan strategy — the pattern in which the laser fills each layer, including rotation between layers.
- Volumetric energy density (VED) —
P/(v·h·t); a convenient but incomplete measure of energy input. - Lack of fusion — voids caused by insufficient melting between tracks or layers.
- Keyhole — a deep, unstable vapour-driven melt-pool mode that can trap pores.
- Build plate — the metal plate on which the part is built and to which it is attached.
- Support structure — sacrificial structure that holds overhangs and conducts heat away.
- Residual stress — stress locked into the part by uneven heating and cooling.
- Stress relief — a heat treatment that relaxes residual stress, usually before the part is cut from the plate.
Where this leads
Next: Electron beam melting and directed energy deposition, the other main ways of melting metal.