Skip to main content

Material jetting and binder jetting

📍 Where we are: Part I · Polymer Processes — Chapter 4 of 15. The last chapter's powder bed was fused by heat; here an inkjet-style printhead places either the part material itself (material jetting) or a glue into powder (binder jetting).

The simple version

An office inkjet printer fires tiny drops of ink onto paper. Now imagine ink that hardens under a lamp, and a printer that goes back over the same page hundreds of times, so the ink drops stack into a solid shape: that is material jetting. Or imagine the printer squirting only glue onto a tray of sand, one layer at a time, so that the glued sand forms the object: that is binder jetting. Both depend on firing very small, very regular drops.

What this chapter covers​

Two ISO/ASTM 52900 categories share one technology, the drop-on-demand printhead. Material jetting selectively deposits droplets of build material; binder jetting selectively deposits a liquid bonding agent onto a powder bed [1]. We start with the physics that decides which liquids can be jetted, then take each process in turn, with its materials, strengths and limits. Metal binder jetting is treated in Part II; here we stay with sand, polymer and colour.

Drop-on-demand: what a liquid must do​

A printhead has many nozzles, each fired by an actuator (often piezoelectric) that pushes out a drop on the picolitre scale (a picolitre is a millionth of a millionth of a litre). Whether a liquid forms a clean drop is governed by a handful of fluid properties: viscosity, surface tension, density and nozzle size. Researchers combine them into dimensionless numbers. The Ohnesorge number compares viscous forces with inertial and surface-tension forces; its inverse, often called Z, is widely used, and numerical work reported by Derby suggests stable single-drop formation for roughly 1 to 10: at low Z viscous dissipation prevents ejection, and at high Z the drop is accompanied by satellite droplets [2]. The review also treats how far a drop spreads on the surface and how neighbouring drops overlap, which together limit resolution and line stability [2].

The practical consequence is that jetted liquids must be thin. A resin that is ideal in a vat may be far too viscous for a jetting head, so material-jetting inks are special low-viscosity formulations, and the narrow window of the actuator limits what can be printed [3].

Material jetting (PolyJet-type)​

Here the printhead places droplets of photocurable resin and a UV lamp passes over to cure them straight away. Several heads can fire different materials onto the same layer, so the process can blend colours, rigidities and transparencies in one part. A removable support material (often a soft gel or wax-like material) fills overhangs and is cleared afterwards; this is typically done with water jets or dissolution.

  • Strengths. Reviews list resolution around 25 µm for PolyJet acrylate systems, fast builds, and multi-material capability [3]. Surface finish is smooth, and features such as realistic multi-colour, multi-hardness models are natural.
  • Limits. Materials are mostly acrylate-based photopolymers with the same ageing, brittleness and heat limits as vat resins; the low-viscosity ink requirement restricts choices [3]. Parts are mainly models and prototypes rather than structural components. For a broader critical review see [4].

The bracket would look excellent here, in a rigid material with a flexible overmould or colour-coded features, but it would be for demonstration and fit checks, not for service loads.

Binder jetting​

A recoater spreads a thin layer of powder, and a printhead deposits droplets of binder where the part will be. The binder wets the powder and glues particles together as it dries or cures; loose powder around the part supports it, as in powder bed fusion. After the build the "green" part is dug out, depowdered and, depending on the material, infiltrated, cured or sintered. Reviews describe binder jetting as adaptable to almost any powder, with high production rates, and report polymers, metals and ceramics processed successfully, while maximising part performance remains a challenge [5].

  • Sand. Binder jetting is a leading route to 3D-printed sand moulds and cores for metal casting; a review of the field notes that removing hazardous chemicals from the process remains a challenge and calls for fusing the sand without them or for more environmentally friendly binders [6]. Printed cores can be complex and made without tooling.
  • Polymer and full-colour. Binder jetting of polymer powders with coloured binders gives full-colour models, which is why it is used for visual and architectural models; reviews list starch, PLA and ceramics as materials, 100 µm resolution, fast builds, multi-material and low-temperature operation, but limited strength and rough surfaces [3].
  • Metal and ceramic. Printed with a binder, then debound and sintered; see the later chapter on metal binder jetting for the shrinkage and density issues. Reviews of binder jetting stress the process parameters (layer thickness, print orientation, binder saturation, print speed, drying time) and sintering conditions as controls on properties [7].

Why the green part is fragile​

The binder bridges particles only at their contacts, and the part is mostly air and powder. So green parts are handled carefully, and the property story is decided later: by infiltration, curing or sintering, not by the printing step alone.

AspectMaterial jettingBinder jetting
What the head depositsBuild material (photopolymer)Binder (glue)
Where the solid comes fromThe jetted resin, cured by UVThe powder, glued by the binder
SupportA separate removable support materialLoose powder
Typical strengthSmooth, accurate, model-gradeLow as printed; needs later steps
Best atMulti-material, colour and fine detail modelsSand cores and moulds, full-colour models, metal print-and-sinter

A two-panel diagram: left, a material jetting printhead with nozzles dropping resin droplets over a part with support material and a UV lamp; right, a binder jetting recoater and printhead depositing binder into a powder bed with a part inside loose powder. Material jetting cures jetted droplets of resin with UV light; binder jetting glues powder with jetted binder, leaving the loose powder as support. Original diagram by the authors, created with AI assistance.

Bracket check​

Material jetting gives a smooth, colour-coded demonstration bracket, but not a part to bolt under load. Binder jetting suggests two uses: a sand mould or core for casting the bracket in metal, or, in a metal powder, a print-and-sinter route (covered later). In both, the printing is only half of the story.

Why it matters​

Jetting is the AM family closest to the inkjet industry, so it inherits fast, parallel, multi-nozzle deposition. It also shows a general rule: a process that does not need to melt anything can run cold, mix materials and colours, and scale to large beds, but the strength has to come from somewhere else.

In the real world​

Material jetting is a staple of design studios, medical and dental modelling, and tooling prototypes, where realism matters more than load capacity. Binder jetting of sand is established in foundries for complex cores and moulds, and in full-colour modelling. The recurring question in both is how the printed state becomes the final material.

Key terms​

  • Material jetting — AM process category where droplets of build material are selectively deposited.
  • Binder jetting — AM process category where a liquid bonding agent is selectively deposited onto a powder bed.
  • Drop-on-demand (DOD) — printheads that fire a drop only when needed, usually with a piezoelectric actuator.
  • Ohnesorge number / Z — dimensionless groups combining viscosity, surface tension, density and nozzle size to judge whether a liquid forms a stable drop.
  • Satellite droplet — an unwanted small drop trailing the main drop.
  • Support material — a removable material jetted under overhangs in material jetting.
  • Binder — the liquid glue deposited into the powder in binder jetting.
  • Green part — a printed part held by binder, before curing, infiltration or sintering.
  • Furan binder — an acid-cured furfuryl resin binder used for sand moulds and cores.
  • Depowdering — removing loose powder from a freshly printed part.

Where this leads​

Part I is complete. Part II begins with the most widely used metal process: Laser powder bed fusion (PBF-LB/M).