Skip to main content

References

📍 Where we are: the evidence base for AM Processes, Materials & Design, gathered in one place.

Every inline citation in this book — written as a bracketed number like [1] — resolves here, grouped by chapter. The numbering restarts in each chapter and matches the [N] markers in that chapter. Entries are identical in every language edition. "Cited by" counts come from Crossref (as of the build date) and only exist for entries with a DOI; standards, official documentation and source repositories carry no count.

Chapter 1 — Preface — AM Processes, Materials & Design​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, Wang CCL, Shin YC, Zhang S, Zavattieri PD. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — cited by 2,269
  3. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — cited by 3,679

Chapter 2 — Material extrusion (FFF/FDM)​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Turner BN, Strong R, Gold SA. (2014). A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyping Journal 20(3):192-204. https://doi.org/10.1108/RPJ-01-2013-0012 — cited by 1,329
  3. Sun Q, Rizvi GM, Bellehumeur CT, Gu P. (2008). Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid Prototyping Journal 14(2):72-80. https://doi.org/10.1108/13552540810862028 — cited by 1,207
  4. Ahn S-H, Montero M, Odell D, Roundy S, Wright PK. (2002). Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyping Journal 8(4):248-257. https://doi.org/10.1108/13552540210441166 — cited by 2,165
  5. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — cited by 3,679
  6. Vaes D, Van Puyvelde P. (2021). Semi-crystalline feedstock for filament-based 3D printing of polymers. Progress in Polymer Science 118:101411. https://doi.org/10.1016/j.progpolymsci.2021.101411 — cited by 229
  7. Zanjanijam AR, Major I, Lyons JG, Lafont U, Devine DM. (2020). Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships. Polymers 12(8):1665. https://doi.org/10.3390/polym12081665 — cited by 232
  8. Zhuo P, Li S, Ashcroft IA, Jones AI. (2021). Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook. Composites Part B: Engineering 224:109143. https://doi.org/10.1016/j.compositesb.2021.109143 — cited by 278

Chapter 3 — Vat photopolymerization (SLA, DLP, LCD)​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — cited by 3,679
  3. Bagheri A, Jin J. (2019). Photopolymerization in 3D Printing. ACS Applied Polymer Materials 1(4):593-611. https://doi.org/10.1021/acsapm.8b00165 — cited by 1,466
  4. Lee JH, Prud'homme RK, Aksay IA. (2001). Cure depth in photopolymerization: Experiments and theory. Journal of Materials Research 16(12):3536-3544. https://doi.org/10.1557/jmr.2001.0485 — cited by 295
  5. Kolibaba TJ, Killgore JP, Caplins BW, Higgins CI, Arp U, Miller CC, et al. (2024). Results of an interlaboratory study on the working curve in vat photopolymerization. Additive Manufacturing 84:104082. https://doi.org/10.1016/j.addma.2024.104082 — cited by 30
  6. Pagac M, Hajnys J, Ma QP, Jancar L, Jansa J, Stefek P, et al. (2021). A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing. Polymers 13(4):598. https://doi.org/10.3390/polym13040598 — cited by 826
  7. Tumbleston JR, Shirvanyants D, Ermoshkin N, Janusziewicz R, Johnson AR, Kelly D, et al. (2015). Continuous liquid interface production of 3D objects. Science 347(6228):1349-1352. https://doi.org/10.1126/science.aaa2397 — cited by 2,203

Chapter 4 — Polymer powder bed fusion (SLS, MJF)​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Kruth J, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M. (2005). Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping Journal 11(1):26-36. https://doi.org/10.1108/13552540510573365 — cited by 1,211
  3. Cai C, Tey WS, Chen J, Zhu W, Liu X, Liu T, et al. (2021). Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion. Journal of Materials Processing Technology 288:116882. https://doi.org/10.1016/j.jmatprotec.2020.116882 — cited by 261
  4. Schmid M, Amado A, Wegener K. (2014). Materials perspective of polymers for additive manufacturing with selective laser sintering. Journal of Materials Research 29(17):1824-1832. https://doi.org/10.1557/jmr.2014.138 — cited by 245
  5. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — cited by 3,679
  6. Goodridge R, Tuck C, Hague R. (2012). Laser sintering of polyamides and other polymers. Progress in Materials Science 57(2):229-267. https://doi.org/10.1016/j.pmatsci.2011.04.001 — cited by 798
  7. Han W, Kong L, Xu M. (2022). Advances in selective laser sintering of polymers. International Journal of Extreme Manufacturing 4(4):042002. https://doi.org/10.1088/2631-7990/ac9096 — cited by 254

Chapter 5 — Material jetting and binder jetting​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Derby B. (2010). Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution. Annual Review of Materials Research 40:395-414. https://doi.org/10.1146/annurev-matsci-070909-104502 — cited by 1,924
  3. Ligon SC, Liska R, Stampfl J, Gurr M, Mülhaupt R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 117(15):10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074 — cited by 3,679
  4. Gülcan O, Günaydın K, Tamer A. (2021). The State of the Art of Material Jetting—A Critical Review. Polymers 13(16):2829. https://doi.org/10.3390/polym13162829 — cited by 294
  5. Ziaee M, Crane NB. (2019). Binder jetting: A review of process, materials, and methods. Additive Manufacturing 28:781-801. https://doi.org/10.1016/j.addma.2019.05.031 — cited by 415
  6. Sivarupan T, Balasubramani N, Saxena P, Nagarajan D, El Mansori M, Salonitis K, et al. (2021). A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting. Additive Manufacturing 40:101889. https://doi.org/10.1016/j.addma.2021.101889 — cited by 68
  7. Mostafaei A, Elliott AM, Barnes JE, Li F, Tan W, Cramer CL, Nandwana P, Chmielus M. (2021). Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Progress in Materials Science 119:100707. https://doi.org/10.1016/j.pmatsci.2020.100707 — cited by 1,079

Chapter 6 — Laser powder bed fusion (PBF-LB/M)​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Herzog D, Seyda V, Wycisk E, Emmelmann C. (2016). Additive manufacturing of metals. Acta Materialia 117:371-392. https://doi.org/10.1016/j.actamat.2016.07.019 — cited by 4,726
  3. DebRoy T, Wei HL, Zuback JS, Mukherjee T, Elmer JW, Milewski JO, Beese AM, Wilson-Heid A, De A, Zhang W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science 92:112-224. https://doi.org/10.1016/j.pmatsci.2017.10.001 — cited by 8,836
  4. Khairallah SA, Anderson AT, Rubenchik A, King WE. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia 108:36-45. https://doi.org/10.1016/j.actamat.2016.02.014 — cited by 2,757
  5. Huang Y, Fleming TG, Clark SJ, Marussi S, Fezzaa K, Thiyagalingam J, et al. (2022). Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing. Nature Communications 13(1):1170. https://doi.org/10.1038/s41467-022-28694-x — cited by 432
  6. Bertoli US, Wolfer AJ, Matthews MJ, Delplanque J-PR, Schoenung JM. (2017). On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting. Materials & Design 113:331-340. https://doi.org/10.1016/j.matdes.2016.10.037 — cited by 788
  7. Yap CY, Chua CK, Dong ZL, Liu ZH, Zhang DQ, Loh LE, Sing SL. (2015). Review of selective laser melting: Materials and applications. Applied Physics Reviews 2(4):041101. https://doi.org/10.1063/1.4935926 — cited by 2,197
  8. ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html

Chapter 7 — Electron beam melting and directed energy deposition​

  1. Körner C. (2016). Additive manufacturing of metallic components by selective electron beam melting — a review. International Materials Reviews 61(5):361-377. https://doi.org/10.1080/09506608.2016.1176289 — cited by 1,088
  2. Fu Z, Körner C. (2022). Actual state-of-the-art of electron beam powder bed fusion. European Journal of Materials 2(1):54-116. https://doi.org/10.1080/26889277.2022.2040342 — cited by 143
  3. Svetlizky D, Das M, Zheng B, Vyatskikh AL, Bose S, Bandyopadhyay A, et al. (2021). Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today 49:271-295. https://doi.org/10.1016/j.mattod.2021.03.020 — cited by 1,431
  4. Gu DD, Meiners W, Wissenbach K, Poprawe R. (2012). Laser additive manufacturing of metallic components: materials, processes and mechanisms. International Materials Reviews 57(3):133-164. https://doi.org/10.1179/1743280411y.0000000014 — cited by 3,081
  5. Ahn DG. (2021). Directed Energy Deposition (DED) Process: State of the Art. International Journal of Precision Engineering and Manufacturing-Green Technology 8(2):703-742. https://doi.org/10.1007/s40684-020-00302-7 — cited by 821
  6. Williams SW, Martina F, Addison AC, Ding J, Pardal G, Colegrove P. (2016). Wire + Arc Additive Manufacturing. Materials Science and Technology 32(7):641-647. https://doi.org/10.1179/1743284715y.0000000073 — cited by 1,770
  7. Wu B, Pan Z, Ding D, Cuiuri D, Li H, Xu J, et al. (2018). A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement. Journal of Manufacturing Processes 35:127-139. https://doi.org/10.1016/j.jmapro.2018.08.001 — cited by 1,557
  8. Yin S, Cavaliere P, Aldwell B, Jenkins R, Liao H, Li W, et al. (2018). Cold spray additive manufacturing and repair: Fundamentals and applications. Additive Manufacturing 21:628-650. https://doi.org/10.1016/j.addma.2018.04.017 — cited by 259

Chapter 8 — Metal binder jetting and 'print-and-sinter' routes​

  1. Gonzalez-Gutierrez J, Cano S, Schuschnigg S, Kukla C, Sapkota J, Holzer C. (2018). Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives. Materials 11(5):840. https://doi.org/10.3390/ma11050840 — cited by 689
  2. Li M, Du W, Elwany A, Pei Z, Ma C. (2020). Metal Binder Jetting Additive Manufacturing: A Literature Review. Journal of Manufacturing Science and Engineering 142(9):090801. https://doi.org/10.1115/1.4047430 — cited by 320
  3. Suwanpreecha C, Manonukul A. (2022). A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding. Metals 12(3):429. https://doi.org/10.3390/met12030429 — cited by 247
  4. Mostafaei A, Elliott AM, Barnes JE, Li F, Tan W, Cramer CL, et al. (2021). Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges. Progress in Materials Science 119:100707. https://doi.org/10.1016/j.pmatsci.2020.100707 — cited by 1,079
  5. Sadeghi Borujeni S, Shad A, Abburi Venkata K, Günther N, Ploshikhin V. (2022). Numerical simulation of shrinkage and deformation during sintering in metal binder jetting with experimental validation. Materials & Design 216:110490. https://doi.org/10.1016/j.matdes.2022.110490 — cited by 61
  6. Ziaee M, Crane NB. (2019). Binder jetting: A review of process, materials, and methods. Additive Manufacturing 28:781-801. https://doi.org/10.1016/j.addma.2019.05.031 — cited by 415

Chapter 9 — Ceramics, composites and other material families​

  1. Chen Z, Li Z, Li J, Liu C, Lao C, Fu Y, et al. (2019). 3D printing of ceramics: A review. Journal of the European Ceramic Society 39(4):661-687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013 — cited by 2,073
  2. Halloran JW. (2016). Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization. Annual Review of Materials Research 46(1):19-40. https://doi.org/10.1146/annurev-matsci-070115-031841
  3. Zhang K, Meng Q, Qu Z, He R. (2024). A review of defects in vat photopolymerization additive-manufactured ceramics: Characterization, control, and challenges. Journal of the European Ceramic Society 44(3):1361-1384. https://doi.org/10.1016/j.jeurceramsoc.2023.10.067 — cited by 151
  4. Du W, Ren X, Pei Z, Ma C. (2020). Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density. Journal of Manufacturing Science and Engineering 142(4):040801. https://doi.org/10.1115/1.4046248 — cited by 175
  5. Lewis JA, Smay JE, Stuecker J, Cesarano J. (2006). Direct Ink Writing of Three‐Dimensional Ceramic Structures. Journal of the American Ceramic Society 89(12):3599-3609. https://doi.org/10.1111/j.1551-2916.2006.01382.x — cited by 772
  6. Jamal MA, Shah OR, Ghafoor U, Qureshi Y, Bhutta MR. (2024). Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review. Polymers 16(12):1622. https://doi.org/10.3390/polym16121622 — cited by 101
  7. Li N, Li Y, Liu S. (2016). Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing. Journal of Materials Processing Technology 238:218-225. https://doi.org/10.1016/j.jmatprotec.2016.07.025 — cited by 681
  8. Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — cited by 1,453
  9. Hehr A, Norfolk M, Wenning J, Sheridan J, Leser P, Leser P, et al. (2017). Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing. JOM 70(3):315-320. https://doi.org/10.1007/s11837-017-2709-8 — cited by 59
  10. Buswell R, Leal de Silva W, Jones S, Dirrenberger J. (2018). 3D printing using concrete extrusion: A roadmap for research. Cement and Concrete Research 112:37-49. https://doi.org/10.1016/j.cemconres.2018.05.006 — cited by 1,574
  11. Paolini A, Kollmannsberger S, Rank E. (2019). Additive manufacturing in construction: A review on processes, applications, and digital planning methods. Additive Manufacturing 30:100894. https://doi.org/10.1016/j.addma.2019.100894 — cited by 307

Chapter 10 — Design for additive manufacturing (DfAM)​

  1. Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — cited by 1,821
  2. ISO/ASTM 52910:2018 — Additive manufacturing — Design — Requirements, guidelines and recommendations. ISO/ASTM. https://www.iso.org/standard/67289.html
  3. Cong S, Gu H, Wei C, Zhang M, Cheng D, Qian L, et al. (2025). Advancements and challenges in overhang structure fabrication during laser powder bed fusion: a comprehensive review. Virtual and Physical Prototyping 20(1):e2567382. https://doi.org/10.1080/17452759.2025.2567382 — cited by 20
  4. Kranz J, Herzog D, Emmelmann C. (2014). Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. Journal of Laser Applications 27(S1):S14001. https://doi.org/10.2351/1.4885235 — cited by 438
  5. Jiang J, Xu X, Stringer J. (2018). Support Structures for Additive Manufacturing: A Review. Journal of Manufacturing and Materials Processing 2(4):64. https://doi.org/10.3390/jmmp2040064 — cited by 342
  6. Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — cited by 1,453
  7. Vaneker T, Bernard A, Moroni G, Gibson I, Zhang Y. (2020). Design for additive manufacturing: Framework and methodology. CIRP Annals 69(2):578-599. https://doi.org/10.1016/j.cirp.2020.05.006 — cited by 271

Chapter 11 — Topology optimization and lattice structures​

  1. Bendsøe MP. (1989). Optimal shape design as a material distribution problem. Structural Optimization 1(4):193-202. https://doi.org/10.1007/bf01650949 — cited by 4,013
  2. Sigmund O. (2001). A 99 line topology optimization code written in Matlab. Structural and Multidisciplinary Optimization 21(2):120-127. https://doi.org/10.1007/s001580050176 — cited by 2,427
  3. Liu K, Tovar A. (2014). An efficient 3D topology optimization code written in Matlab. Structural and Multidisciplinary Optimization 50(6):1175-1196. https://doi.org/10.1007/s00158-014-1107-x — cited by 602
  4. Sigmund O, Maute K. (2013). Topology optimization approaches. Structural and Multidisciplinary Optimization 48(6):1031-1055. https://doi.org/10.1007/s00158-013-0978-6 — cited by 2,818
  5. Liu J, Gaynor AT, Chen S, Kang Z, Suresh K, Takezawa A, et al. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization 57(6):2457-2483. https://doi.org/10.1007/s00158-018-1994-3 — cited by 816
  6. Plocher J, Panesar A. (2019). Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures. Materials & Design 183:108164. https://doi.org/10.1016/j.matdes.2019.108164 — cited by 651
  7. Langelaar M. (2016). Topology optimization of 3D self-supporting structures for additive manufacturing. Additive Manufacturing 12:60-70. https://doi.org/10.1016/j.addma.2016.06.010 — cited by 221
  8. Maconachie T, Leary M, Lozanovski B, Zhang X, Qian M, Faruque O, et al. (2019). SLM lattice structures: Properties, performance, applications and challenges. Materials & Design 183:108137. https://doi.org/10.1016/j.matdes.2019.108137 — cited by 1,448
  9. Feng J, Fu J, Yao X, He Y. (2022). Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications. International Journal of Extreme Manufacturing 4(2):022001. https://doi.org/10.1088/2631-7990/ac5be6 — cited by 760
  10. Li J, Wang L, He X, Liang J, Dong C. (2025). Additively manufactured metallic TPMS lattice structures: design strategies, fabrication, multifunctional properties, and applications. npj Advanced Manufacturing 2(1):45. https://doi.org/10.1038/s44334-025-00057-6 — cited by 90
  11. Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, et al. (2016). Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints. CIRP Annals 65(2):737-760. https://doi.org/10.1016/j.cirp.2016.05.004 — cited by 1,821

Chapter 12 — Orientation, supports and build preparation​

  1. Jiang J, Xu X, Stringer J. (2018). Support Structures for Additive Manufacturing: A Review. Journal of Manufacturing and Materials Processing 2(4):64. https://doi.org/10.3390/jmmp2040064 — cited by 342
  2. Xie D, Lv F, Yang Y, Shen L, Tian Z, Shuai C, et al. (2022). A Review on Distortion and Residual Stress in Additive Manufacturing. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1(3):100039. https://doi.org/10.1016/j.cjmeam.2022.100039 — cited by 63
  3. Gibson I, Rosen D, Stucker B, Khorasani M. (2021). Additive Manufacturing Technologies. Springer International Publishing. https://doi.org/10.1007/978-3-030-56127-7 — cited by 1,453
  4. Mercelis P, Kruth J. (2006). Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal 12(5):254-265. https://doi.org/10.1108/13552540610707013 — cited by 1,908
  5. Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — cited by 259
  6. Calignano F. (2014). Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting. Materials & Design 64:203-213. https://doi.org/10.1016/j.matdes.2014.07.043 — cited by 468
  7. Hussein A, Hao L, Yan C, Everson R, Young P. (2013). Advanced lattice support structures for metal additive manufacturing. Journal of Materials Processing Technology 213(7):1019-1026. https://doi.org/10.1016/j.jmatprotec.2013.01.020 — cited by 423
  8. Xu S, Liu J, Sun Y, Li X, Ma Y. (2024). Support structure topology optimization considering the residual distortion for laser powder bed fusion metal additive manufacturing. Structural and Multidisciplinary Optimization 67(10):182. https://doi.org/10.1007/s00158-024-03883-y — cited by 12
  9. Miki T. (2023). Self-support topology optimization considering distortion for metal additive manufacturing. Computer Methods in Applied Mechanics and Engineering 404:115821. https://doi.org/10.1016/j.cma.2022.115821 — cited by 39
  10. Chen Q, Liang X, Hayduke D, Liu J, Cheng L, Oskin J, et al. (2019). An inherent strain based multiscale modeling framework for simulating part-scale residual deformation for direct metal laser sintering. Additive Manufacturing 28:406-418. https://doi.org/10.1016/j.addma.2019.05.021 — cited by 107

Chapter 13 — Post-processing​

  1. Bartlett JL, Li X. (2019). An overview of residual stresses in metal powder bed fusion. Additive Manufacturing 27:131-149. https://doi.org/10.1016/j.addma.2019.02.020 — cited by 259
  2. Paraschiv A, Matache G, Vladut M. (2024). Assessment of Residual Stresses in Laser Powder Bed Fusion Manufactured IN 625. Materials 17(2):413. https://doi.org/10.3390/ma17020413 — cited by 25
  3. ASTM F3301-18a — Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion. ASTM International. https://store.astm.org/f3301-18a.html
  4. Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. (2016). The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47(5):1939-1946. https://doi.org/10.1007/s11661-016-3429-3
  5. Maleki E, Bagherifard S, Bandini M, Guagliano M. (2021). Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities. Additive Manufacturing 37:101619. https://doi.org/10.1016/j.addma.2020.101619 — cited by 225
  6. Townsend A, Senin N, Blunt L, Leach R, Taylor J. (2016). Surface texture metrology for metal additive manufacturing: a review. Precision Engineering 46:34-47. https://doi.org/10.1016/j.precisioneng.2016.06.001 — cited by 687
  7. Masuo H, Tanaka Y, Morokoshi S, Yagura H, Uchida T, Yamamoto Y, et al. (2018). Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. International Journal of Fatigue 117:163-179. https://doi.org/10.1016/j.ijfatigue.2018.07.020
  8. du Plessis A, Yadroitsava I, Yadroitsev I. (2020). Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights. Materials & Design 187:108385. https://doi.org/10.1016/j.matdes.2019.108385 — cited by 700
  9. Srinivasan L, V E. (2026). Experimental investigation of hot chemical vapor smoothing parameters for enhanced surface quality control in SLS-fabricated PA12 parts. Rapid Prototyping Journal:1-14. https://doi.org/10.1108/rpj-12-2025-0678 — cited by 5
  10. D. S. Thomas, S. W. Gilbert. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://doi.org/10.6028/NIST.SP.1176 — cited by 252
  11. Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — cited by 593

Chapter 14 — Quality, inspection and non-destructive testing​

  1. du Plessis A, Yadroitsev I, Yadroitsava I, Le Roux SG. (2018). X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications. 3D Printing and Additive Manufacturing 5(3):227-247. https://doi.org/10.1089/3dp.2018.0060 — cited by 465
  2. Tammas-Williams S, Zhao H, Léonard F, Derguti F, Todd I, Prangnell P. (2015). XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting. Materials Characterization 102:47-61. https://doi.org/10.1016/j.matchar.2015.02.008 — cited by 577
  3. Townsend A, Senin N, Blunt L, Leach R, Taylor J. (2016). Surface texture metrology for metal additive manufacturing: a review. Precision Engineering 46:34-47. https://doi.org/10.1016/j.precisioneng.2016.06.001 — cited by 687
  4. du Plessis A, Yadroitsava I, Yadroitsev I. (2020). Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights. Materials & Design 187:108385. https://doi.org/10.1016/j.matdes.2019.108385 — cited by 700
  5. ISO/ASTM 52902:2023 — Additive manufacturing — Test artefacts — Geometric capability assessment of additive manufacturing systems. ISO/ASTM. https://www.iso.org/standard/79683.html
  6. ASTM B962 — Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle. ASTM International. https://store.astm.org/standards/b962
  7. Slotwinski JA, Garboczi EJ, Hebenstreit KM. (2014). Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control. Journal of Research of the National Institute of Standards and Technology 119:494. https://doi.org/10.6028/jres.119.019 — cited by 385
  8. Thompson A, Maskery I, Leach RK. (2016). X-ray computed tomography for additive manufacturing: a review. Measurement Science and Technology 27(7):072001. https://doi.org/10.1088/0957-0233/27/7/072001 — cited by 485
  9. ASTM E3166-20e1 — Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build. ASTM International. https://store.astm.org/e3166-20e01.html
  10. Tammas-Williams S, Withers PJ, Todd I, Prangnell PB. (2016). The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting. Metallurgical and Materials Transactions A 47(5):1939-1946. https://doi.org/10.1007/s11661-016-3429-3
  11. NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems. NASA. https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  12. ISO/ASTM 52909:2024 — Additive manufacturing of metals — Finished part properties — Orientation and location dependence of mechanical properties for metal parts. ISO/ASTM. https://www.iso.org/standard/87956.html
  13. Kok Y, Tan X, Wang P, Nai M, Loh N, Liu E, et al. (2018). Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Materials & Design 139:565-586. https://doi.org/10.1016/j.matdes.2017.11.021 — cited by 1,443

Chapter 15 — Standards, qualification and certification​

  1. ISO/TC 261 — Additive manufacturing (committee page and business plan describing the ISO-ASTM partnership and joint development). ISO. https://www.iso.org/committee/629086.html
  2. Seifi M, Salem A, Beuth J, Harrysson O, Lewandowski JJ. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM 68(3):747-764. https://doi.org/10.1007/s11837-015-1810-0 — cited by 570
  3. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  4. ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html
  5. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  6. ISO/ASTM TS 52930:2021 — Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment. ISO/ASTM. https://www.iso.org/standard/79527.html
  7. ISO/ASTM 52941:2026 — Additive manufacturing for aerospace — System performance and reliability tests for laser metal powder-bed fusion machines for metallic materials (2020 edition: Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application). ISO/ASTM. https://www.iso.org/standard/86784.html
  8. ASTM F2924-14(2021) — Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion. ASTM International. https://store.astm.org/standards/f2924
  9. NASA-STD-6030 — Additive Manufacturing Requirements for Spaceflight Systems. NASA. https://standards.nasa.gov/standard/NASA/NASA-STD-6030
  10. EASA. CM-S-008 Issue 04 — Certification Memorandum: Additive Manufacturing. https://www.easa.europa.eu/en/downloads/142437/en
  11. FAA. (2023). AC 33.15-3 — Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts. https://www.faa.gov/documentLibrary/media/Advisory_Circular/AC_33.15-3.pdf
  12. FDA. (2017). Technical Considerations for Additive Manufactured Medical Devices — Guidance for Industry and Food and Drug Administration Staff. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/technical-considerations-additive-manufactured-medical-devices

Chapter 16 — Choosing a process: a decision guide​

  1. ISO/ASTM 52900:2021 — Additive manufacturing — General principles — Fundamentals and vocabulary. ISO/ASTM. https://www.iso.org/standard/74514.html
  2. Gao W, Zhang Y, Ramanujan D, Ramani K, Chen Y, Williams CB, et al. (2015). The status, challenges, and future of additive manufacturing in engineering. Computer-Aided Design 69:65-89. https://doi.org/10.1016/j.cad.2015.04.001 — cited by 2,269
  3. Ngo TD, Kashani A, Imbalzano G, Nguyen KT, Hui D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering 143:172-196. https://doi.org/10.1016/j.compositesb.2018.02.012 — cited by 8,080
  4. Maleki E, Bagherifard S, Bandini M, Guagliano M. (2021). Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities. Additive Manufacturing 37:101619. https://doi.org/10.1016/j.addma.2020.101619 — cited by 225
  5. D. S. Thomas, S. W. Gilbert. (2014). Costs and Cost Effectiveness of Additive Manufacturing. NIST Special Publication 1176. https://doi.org/10.6028/NIST.SP.1176 — cited by 252
  6. Baumers M, Dickens P, Tuck C, Hague R. (2016). The cost of additive manufacturing: machine productivity, economies of scale and technology-push. Technological Forecasting and Social Change 102:193-201. https://doi.org/10.1016/j.techfore.2015.02.015 — cited by 593
  7. ISO/ASTM 52920:2023 — Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites. ISO/ASTM. https://www.iso.org/standard/76911.html
  8. ISO/ASTM 52904:2024 — Additive manufacturing of metals — Process characteristics and performance — Metal powder bed fusion process to meet critical applications. ISO/ASTM. https://www.iso.org/standard/82919.html