The bigger picture and where to go next
📍 Where we are: Part 3 · Getting Hands-On — Chapter 11 of 11, the last chapter of Book 1. You now know what AM is, how it works, where it pays and how to start safely. This chapter zooms out to the organisations and standards around the technology and shows where to read next.
Imagine a football league. There are teams (machine makers), suppliers of balls and boots (material makers), coaches and analysts (software and design experts), stadiums that rent out space (service bureaus) and, importantly, a rulebook and referees (standards bodies) so that everyone means the same thing by "offside". Additive manufacturing has grown into a league like that. This chapter introduces the rulebook writers and the league table, then gives you a reading plan for the rest of the series.
What this chapter covers
We look at who writes the standards that give the field its shared vocabulary and quality rules, how the wider industry is organised, and how Books 2, 3 and 4 build on this one. We end with self-check questions so you can test what you have learned.
Standards: the shared language
A standard is a document, agreed by experts through a formal process, that sets out a common definition, test method or requirement, so that a "titanium part" or a "layer" means the same thing to a customer in one country and a supplier in another.
ASTM F42 and ISO/TC 261
Two committees do most of the work in additive manufacturing:
- ASTM Committee F42 on Additive Manufacturing Technologies — formed in 2009 under ASTM International, an organisation that develops technical standards [1].
- ISO/TC 261, Additive manufacturing — a technical committee of the International Organization for Standardization (ISO). Its first chairman, Joerg Lenz, served from 2011 to 2018 [2].
In 2011, ISO and ASTM signed a cooperation agreement so that the two would adopt and jointly develop international standards instead of duplicating effort; standards produced this way carry both names, as in "ISO/ASTM 52900" [3].
The vocabulary standard you have already used
ISO/ASTM 52900:2021, Additive manufacturing — General principles — Fundamentals and vocabulary, defines the terms of the field. The second edition (published November 2021) replaced the 2015 edition, added new and modified terms and abbreviations for the seven process categories, and includes an annex that sorts AM processes by category and by their determining characteristics. It was prepared by ISO/TC 261 with ASTM F42, and with CEN/TC 438 (the European committee) under the Vienna Agreement, a cooperation arrangement between ISO and European standardisation [4]. The seven categories (material extrusion, vat photopolymerization, powder bed fusion, material jetting, binder jetting, directed energy deposition and sheet lamination) are the backbone of Book 2.
Beyond vocabulary, standards in this family cover areas such as test methods, materials, design and qualification. The next books return to specific ones when they matter.
Top: the two standards committees and the joint vocabulary standard they produced. Bottom: the four books of the series, ordered by difficulty, with Book 1 completed.
Original diagram by the authors, created with AI assistance.
The ecosystem in one paragraph
Around the technology sits a chain of players. Machine makers build printers; material suppliers make the filaments, resins and powders; software companies and open-source communities provide design, slicing and control tools; service bureaus print parts for customers who do not own machines; end users in industries like those in Chapter 7 specify and buy parts; researchers push the limits; regulators and standards bodies set the rules. A newcomer can enter at any of these points. Book 3 is about the open-source part of this world.
How the rest of the series continues
Book 1 gave you the map; the next three books go deeper, each at a higher level of difficulty.
- Book 2 — AM Processes, Materials & Design (intermediate): one chapter per major process family, then how to design parts for AM, prepare and post-process builds, inspect and qualify them, and choose a process. If you want to continue straight away, start here.
- Book 3 — Open-Source Additive Manufacturing (intermediate to advanced): the open hardware, firmware, slicers and software that grew from the RepRap movement, for readers comfortable with programming and the command line.
- Book 4 — Research Frontiers & Industrial Challenges (advanced): the open problems the industry still struggles with, written against the research literature for readers with an engineering or science background.
You do not have to read them in order. Choose by what you want to do: understand industrial processes (Book 2), build or modify machines and software (Book 3), or follow the research edge (Book 4).
Self-check questions
Try to answer these without looking back. If you cannot, the relevant chapter is named in brackets.
- In one sentence, what is additive manufacturing, and how does it differ from subtractive manufacturing? (introduction)
- Name the steps between a CAD model and a finished part. (digital workflow)
- List at least four of the seven process categories and give a one-line mental picture of each. (seven process categories)
- Which material families can AM use, and in what forms (filament, resin, powder, wire, sheet)? (materials at a glance)
- Give two strengths and two limits of AM. (what AM is good at)
- Why is a customized product such as a dental aligner a good fit for AM? (applications by industry)
- If a mold costs 20,000 and saves 13 per part compared with printing, at what volume do the two break even? (economics; the answer is about 1,540 parts, with the illustrative numbers from that chapter)
- What are the three classic first-print failures, and what is one first fix for each? (your first print)
- Which printer family involves combustible dust, and which involves acrylate skin hazards? (safety)
- Who maintains the shared vocabulary of AM? (this chapter)
Why it matters
A technology with a shared vocabulary and agreed standards is one you can trust, buy from and teach. Knowing who sets the rules also tells you where to look when a claim sounds too good to be true: check whether it uses the standard terms and test methods.
In the real world
When you read a product datasheet, a research paper or a purchase order, you will see "ISO/ASTM" numbers. Each number points to a document with a specific scope; the ISO and ASTM catalogues let you look them up, and the standards themselves are usually sold rather than free.
Key terms
- Standard — a formally agreed document setting a common definition, method or requirement.
- ASTM F42 — the ASTM International committee on additive manufacturing technologies, formed in 2009.
- ISO/TC 261 — the ISO technical committee on additive manufacturing.
- ISO/ASTM 52900 — the joint standard that defines the vocabulary and the seven process categories of AM.
- Process category — one of the seven groups of AM processes defined in ISO/ASTM 52900.
- Service bureau — a company that prints parts for customers who do not own machines.
- Machine maker — a company that builds and sells AM printers.
- Material supplier — a company that makes the filaments, resins and powders used in AM.
- Qualification — evidence that a part and process reliably meet the requirements for a use.
- Ecosystem — the connected set of makers, suppliers, users, researchers and regulators around a technology.
Where this leads
You have finished Book 1. The natural next step is Book 2, AM Processes, Materials & Design, which takes each of the seven process categories apart and teaches how to design for them. If you are drawn to open hardware and software, continue to Book 3, Open-Source Additive Manufacturing, and for the research edge and unsolved industrial problems, see Book 4, Research Frontiers & Industrial Challenges.